mahdir Posted June 6, 2017 Share Posted June 6, 2017 Please someone update to 10.13 with AFPS or without it, maybe it's okay without updating the clover ?! I downloaded the 10.13 but I don't know update it or not! I've another question, did apple fix the notification center background color when the dark menu and dock is enabled is white either ?! I wanted it to be like 10.11, when it was black Link to comment Share on other sites More sharing options...
pandaDS3 Posted June 6, 2017 Share Posted June 6, 2017 What does it want from me?? Link to comment Share on other sites More sharing options...
gpatpandp Posted June 6, 2017 Share Posted June 6, 2017 I did not follow this tutorial, but I was stuck at the same point. I went back to language chooser and continued and it worked. Sometimes it takes a little time to load up I guess I too was stuck at this point and after following this advice, I was able to proceed with my installation. When you try to do the second step of the installation process, do not boot form the installation volume yet, you have to use anther working copy of Mac OS to cange the prelinked kernel in .IABootFiles on the target installation volume, so you can boot to it and continue with tìinstallation. When unhiding all files after completing the 1st part of the installation, I could not locate a IABootFiles folder on my target volume. Link to comment Share on other sites More sharing options...
benmacfreak Posted June 6, 2017 Share Posted June 6, 2017 i got in the installer on my hp Probook 4530s but it disk utility just sits on loading..nothing more and its laggy as heck and my wifi nor ps2 kexts'll work. Link to comment Share on other sites More sharing options...
_itsmerafael Posted June 6, 2017 Share Posted June 6, 2017 I too was stuck at this point and after following this advice, I was able to proceed with my installation. When unhiding all files after completing the 1st part of the installation, I could not locate a IABootFiles folder on my target volume. I managed to go through the first part and also did not find this folder. I'm standing in that part now. I do not know if because of prelinkedkernel or something else. Can someone help me? https://lh3.googleusercontent.com/EUNHGx0qjCtOWbvnKQm1Npj-ls_61Pkz_ihFkcCK2dZv-zxea-LAWMhd_l1vtZ_WeKbvbYD8Sg1vsINduWrd8AYS-HCsYfNXhaoKfOilee3ee2yY2Gj1yH34_PylxnXW6eY39wXlO66SC4jIWJhJkFxutVhv7Hmdnm1o_koaJDCdk3Ml8mtQ1ZbMiWSoWjudOd3N2pWRzGkXOxla5k9YB4BTVvkPk-1XmP0eZBLqS_Emvt3d-uT6PGcFrNjRMn3JIQLQg1cqOlTZSm83v1so2FzPTep0Ku7mU0U9vWYIQk78K8xqWLlxwcnAcQqfhxW59lTj2aI-ZW3TolXv7FQeya1iJK8h9Q_sb5aSOGHnLZl8S8j25cdnWAsMUkRkTyGfZjnDyCx9roQ50vWe-fjk1VryjilwjGD98SVlefRHVD3soGxvKtLimDvyU6DG2jCePnmj-hiruD3hNv4_5up1Dm5cqA_CHCu2L7I8YMxU2hK6J8E1ojhxro53ixCQcbtt_GaK_TBH5PU4KLX85AkMcV9CPgMTxxXXMMg6A35I4yFeGPM-qzUzxFR6jCE0CJwl9uyQN3J2A7CKQYG9lNMmY88vPGIHAhuMINT_rRjU3KgPoJnBLG-mBQ=w1234-h925-no Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted June 6, 2017 Share Posted June 6, 2017 I managed to go through the first part and also did not find this folder. I'm standing in that part now. I do not know if because of prelinkedkernel or something else. Can someone help me? https://lh3.googleusercontent.com/EUNHGx0qjCtOWbvnKQm1Npj-ls_61Pkz_ihFkcCK2dZv-zxea-LAWMhd_l1vtZ_WeKbvbYD8Sg1vsINduWrd8AYS-HCsYfNXhaoKfOilee3ee2yY2Gj1yH34_PylxnXW6eY39wXlO66SC4jIWJhJkFxutVhv7Hmdnm1o_koaJDCdk3Ml8mtQ1ZbMiWSoWjudOd3N2pWRzGkXOxla5k9YB4BTVvkPk-1XmP0eZBLqS_Emvt3d-uT6PGcFrNjRMn3JIQLQg1cqOlTZSm83v1so2FzPTep0Ku7mU0U9vWYIQk78K8xqWLlxwcnAcQqfhxW59lTj2aI-ZW3TolXv7FQeya1iJK8h9Q_sb5aSOGHnLZl8S8j25cdnWAsMUkRkTyGfZjnDyCx9roQ50vWe-fjk1VryjilwjGD98SVlefRHVD3soGxvKtLimDvyU6DG2jCePnmj-hiruD3hNv4_5up1Dm5cqA_CHCu2L7I8YMxU2hK6J8E1ojhxro53ixCQcbtt_GaK_TBH5PU4KLX85AkMcV9CPgMTxxXXMMg6A35I4yFeGPM-qzUzxFR6jCE0CJwl9uyQN3J2A7CKQYG9lNMmY88vPGIHAhuMINT_rRjU3KgPoJnBLG-mBQ=w1234-h925-no http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2436885 Download the attached zip and replace them with the ones in your EFI/BOOT and EFI/CLOVER folder Link to comment Share on other sites More sharing options...
ITzTravelInTime Posted June 6, 2017 Author Share Posted June 6, 2017 I too was stuck at this point and after following this advice, I was able to proceed with my installation. When unhiding all files after completing the 1st part of the installation, I could not locate a IABootFiles folder on my target volume. yes I am experimenting too, the guide will be updated Link to comment Share on other sites More sharing options...
_itsmerafael Posted June 6, 2017 Share Posted June 6, 2017 http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2436885 Download the attached zip and replace them with the ones in your EFI/BOOT and EFI/CLOVER folder I did it, but it still stands in the same place. That's it "kext stall (1), (240ms): 'AppleACPICPU'" Link to comment Share on other sites More sharing options...
Andrw0380 Posted June 7, 2017 Share Posted June 7, 2017 I still can't get it to work. I can get past the installer but during the second install phase it always fails at verifying the firmware. I tried using the recovery partition to apply the patched prelinked kernel but DiskUtil doesn't see the hidden install partition that my computer boots from for the second install. I even tried doing single user mode so I could copy the file from there but a) the partition doesn't see the .IABootFiles folder and it doesn't do anything if I copy the patched prelinkedkernel to /System/Library/PreLinkedKernel/prelinkedkernel. Any suggestions? Edit: Basicially it looks like when the second install starts, it mounts the Base System.dmg located in my /macOS Install Data/BaseSystem.dmg which is read-only. That directory has no .IABootFiles directory which is why I can't find it when I boot using Single User mode. There must be another way to inject the patched kernel. 1 Link to comment Share on other sites More sharing options...
rob88v Posted June 7, 2017 Share Posted June 7, 2017 Successful installation! Got it booting from my hard drive on a secondary partition . Link to comment Share on other sites More sharing options...
Max.1974 Posted June 7, 2017 Share Posted June 7, 2017 Im install from my hard drive too, but after 2 minutes just shutdown !! Some light about it? Tks for everything!!! Link to comment Share on other sites More sharing options...
_itsmerafael Posted June 7, 2017 Share Posted June 7, 2017 For today I gave up. I basically tried everything. I can not make my pendrive boot. I updated the Clover to 4081, I used this http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page-657?do=findComment&comment=2436885 I updated both the pendrive and the HDD. I tried using igpu, but I did not succeed. Now I tried using nv_disable = 1 and stopped on a gray screen with a small US flag at the top. http://i.imgur.com/W2OEOD5.jpg I honestly do not know what's wrong so I'll expect to come up some other way before trying again. Link to comment Share on other sites More sharing options...
Vinicius P. Miranda Posted June 7, 2017 Share Posted June 7, 2017 Does anyone know what error this is, and can you help me? I already installed "Clover_v2.4k_r4081.pkg", it already replaces the "prelinkedkernel", but I can not get out of that part. Link to comment Share on other sites More sharing options...
blayze® Posted June 7, 2017 Share Posted June 7, 2017 thats the same error that i can not get out of 1 Link to comment Share on other sites More sharing options...
ITzTravelInTime Posted June 7, 2017 Author Share Posted June 7, 2017 are you using the same configuration of clover and it's drivers that works on the standard Sierra ? 1 Link to comment Share on other sites More sharing options...
himac59 Posted June 7, 2017 Share Posted June 7, 2017 from a working hackintosh(10.12.5) to a clean SSD im installing from the DL image macOS 10.13 Beta 1) Download developer profile (free) LINK 2) Open terminal sudo /System/Library/PrivateFrameworks/Seeding.framework/Versions/A/Resources/seedutil enroll DeveloperSeed 3) Paste command and give password 4) macappstores://itunes.apple.com/app/id1209167288 open this link in safari 5) Click Download after DL image in applications open with show package Content Applications/Install macOS 10.13 Beta open Contents open SharedSupport open InstallESD.dmg. skip verify open Packages open Core its installing now on SSD Mac OS Extended (Journaled) after install i boot with working SSD 10.12.5 and i install a recent Fakesmc.kext on SSD 10.13 Mac OS 10.13 beta is booting with clover imac14,2 from SSD 10.12.5 and some boot options only video Nvidia GT 740 is not going further with webdrivers working all is going fast and smooth with clover 3974 only video now 3 Link to comment Share on other sites More sharing options...
LockDown Posted June 7, 2017 Share Posted June 7, 2017 Open Core? Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted June 7, 2017 Share Posted June 7, 2017 Open Core? Within InstallESD.dmg there's a folder named packages. There's an installer package named Core.pkg Link to comment Share on other sites More sharing options...
LockDown Posted June 7, 2017 Share Posted June 7, 2017 Core is what you clicked to install it? Cause you said to open core Link to comment Share on other sites More sharing options...
IUTniun Posted June 7, 2017 Share Posted June 7, 2017 Core is what you clicked to install it? Cause you said to open core click core Link to comment Share on other sites More sharing options...
LockDown Posted June 7, 2017 Share Posted June 7, 2017 I am installed now. Im just a little confuse about your method, thats all Link to comment Share on other sites More sharing options...
GIEBELWALD Posted June 7, 2017 Share Posted June 7, 2017 I have created an USB Stick by "sudo /Applications/Install\ macOS\ 10.13\ beta.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ 10.13\ beta.app --noiteraction" and Clover r4081 is on it. I added "apfs.efi" in UEFI64 driver folder and "fakesmc.kext" (April Version) to /Kexts/Other/... Reaching Setup works. But when I open Disk Utility it's just spinnig up forever an showas no Disks. I was able, by open terminal and do "diskutil list" to show up my disks in Disk Utility. After a very long time. But thats all. I can't delete my Disk. Install is not working either. Any Idea? Link to comment Share on other sites More sharing options...
fivos1996 Posted June 7, 2017 Share Posted June 7, 2017 Hi all. I grabbed a copy of 10.13 and I created a USB installer with Terminal + Clover. With clover version r4077 I had a kernel panic but r4081 fixed this issue. However, now it hangs here like FakeSMC isn't loading. Any ideas? 1 Link to comment Share on other sites More sharing options...
JanSack Posted June 7, 2017 Share Posted June 7, 2017 For my part i was able to pass Kextd stall with adding the pre patched kernel Link to comment Share on other sites More sharing options...
blayze® Posted June 7, 2017 Share Posted June 7, 2017 are you using the same configuration of clover and it's drivers that works on the standard Sierra ? Yes with the updated clover....but still stuck Link to comment Share on other sites More sharing options...
Recommended Posts