Jump to content

[pre-release] macOS High Sierra

fantomas

By fantomas,
in New Releases and Updates

 Share
3,737 posts in this topic

Recommended Posts

Matthew82
Matthew82
Posted
Posted

okay. we got a great point now.

 

first we need to check install problem(OSinstall.pkg) on each intel cpu architecture.

 

checklist

1.lynnfield

2.sandy

3.ivy - problem

4.haswell

5.broadwell

6.skylake - me, cyberdevs

7.kabylake

 

red is problem.

blue is no problem.

 

to clear issue, first check

try to change ivy smbios to haswell or skylake or kabylake smbios on your ivy build.

 

it's not potential fix. we are going to temporarily check what problems are occurring and where 

 

X99  broadwell-e 6850k and RX580 all good. 

post-916820-0-77000200-1499023450_thumb.png

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

BTW, the language menu appear also with Clover.

 

Hmmb, my bad.. I never got it using Clover since r4087. On my case, it always give "OSInstall.mpkg" error message on first Install GUI appears. I think my USB Install method caused the problem, since I'm not using Create Install Media but BaseSystem restore (caused of this?). Thanks for confirming, anyway  :wink_anim:

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

@Badruzeus

This menue appears with BaseSystem Méthode   :)

So, my unsupported graphics may caused issue with it? But wait, it uses nv_disable=1, otherwise WindowServer crashing my GF119. Or, something wrong with my macOS Installer.. Ok, will recheck tomorrow using another Installer. Thanks.

Link to comment
Share on other sites
surfinchina
surfinchina
Posted
Posted

There was no way I could get the entire HS public beta downloaded, I tried several methods but either got the 11mb file or it would hang - waiting in the launchpad.

For some reason the update in app store gives me an error checking for updates (only the os x update bit) now.

I used the pike script method to get it installed.

X99 with 5960 seems ok.

The HD7970 helper card is no longer accelerated - this happened between the developer and public betas. R9 390x is fine.

R9 Nano is still no go with 4500HWServices kext.

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

Hi @Sherlocks, for report only..

 

The only test I didn't try yet is plugging out my SATA drive since (looks like) another OSes inside it cause problem, or another reasons. Thanks

(still using same mach as seen on my signature, tomorrow test)

 

Ah OK, did the test with SATA Disk plugged out (no Disk at all, only USB Installer); but I still get same "OSInstall.mpkg" error as well. Was using Clover r4101 and Enoch r2885 both give same results, also with some new 2017 Platform Datas with different SMBioses. The outputs from root device with "diskutil info / | grep UUID" are same; no strange issue with it. macOS version I've tried so far was 10.13 Beta DP1 only. Thanks

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

I hope it works out. ;)

Oops tried wrong version. Tried 4094 fresh USB install and still OSInstall.mpkg error. Will downgrade USB and try again.

 

Edit: Nope it was 4092

 

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

Can anyone encountering AppleSMCRTC panics try booting with keepsyms=1 (with the 10.13 AppleACPIPlatform, no downgrades)? I'd like to find the cause.

 

Hello, take a look.. sounds new Here  :)

Link to comment
Share on other sites
crazybirdy
crazybirdy
Posted
Posted

Hmmb, my bad.. I never got it using Clover since r4087. On my case, it always give "OSInstall.mpkg" error message on first Install GUI appears. I think my USB Install method caused the problem, since I'm not using Create Install Media but BaseSystem restore (caused of this?). Thanks for confirming, anyway  :wink_anim:

 

If you use the old basesystem restore method, you will never get to install and always get "OSInstall.mpkg"error.

The only way to install 10.13 is to use createinstallmedia to create Installer or use new MBR installer method for both GPT and MBR .

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

hello

 

if has osinstall.mpkg error, try this on Platformfeature

 

imac13,x 0x01

Imac14,x 0x01

imac15,x 0x01

imac17,1 0x00

 

MB8,1 0x1A

 

MBP11,x 0x02

MBP12,1 0x02

MBP13,x 0x1A

 

MacMini6,x 0x01

MacMini7,x 0x03

 

MacPro6,1 0x04

 

i'm not sure that this values actually affect to fix error or not.


X99  broadwell-e 6850k and RX580 all good. 

 

did you install fresh HS Beta2 update1?

  • Like 1
Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

Oops tried wrong version. Tried 4094 fresh USB install and still OSInstall.mpkg error. Will downgrade USB and try again.

 

Edit: Nope it was 4092

 

Sent from my SM-G930F using Tapatalk

So you have no luck with 4092,4094,4097,4100 and 4101. The only way that you can Install macOS High Sierra DP 2 update 1 is as if you install it from Sierra? Right?

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

So you have no luck with 4092,4094,4097,4100 and 4101. The only way that you can Install macOS High Sierra DP 2 update 1 is as if you install it from Sierra? Right?

That's correct. All USB installs have ended in OSInstall.mpkg error.

I think I'll wait for official release before testing more on my laptop, too many partitions to worry about and messes up my custom entries.

Back to Skylake.

Sent from my SM-G930F using Tapatalk

  • Like 1
Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

hello

 

if has osinstall.mpkg error, try this on Platformfeature

 

imac13,x 0x01

Imac14,x 0x01

imac15,x 0x01

imac17,1 0x00

 

MB8,1 0x1A

 

MBP11,x 0x02

MBP12,1 0x02

MBP13,x 0x1A

 

MacMini6,x 0x01

MacMini7,x 0x03

 

MacPro6,1 0x04

 

i'm not sure that this values actually affect to fix error or not.

Just to be clear I use the values just like you said? I mean I just need to change the PlatformFeature in clover GUI and replace the PlatformFeature: 0xFFFF with PlatformFeature:0x01 ?

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Just to be clear I use the values just like you said? I mean I just need to change the PlatformFeature in clover GUI and replace the PlatformFeature: 0xFFFF with PlatformFeature:0x01 ?

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Thanks, I've been testing with 4097 and no luck so far. I'll keep testing and I will give you the results as soon as I'm done.

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

Yes. Change 0xFFFF to you want(0x01)

Or if you want to keep PF, PlatformFeature String 0x01 in config.plist.

 

This is test. Not sure that can pass osinstall.pkg or not

 

나의 LG-F800S 의 Tapatalk에서 보냄

Changed my mind. Testing latest clover 4102 I think with 0x02 platformfeature with USB install.

 

Edit: Still the same outcome with OSInstall.mpkg error.

 

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites
hackintosh1984
hackintosh1984
Posted
Posted

For your platformdata update @Sherlocks:

 

 

 

EFIPayloads:

 - IM101.88Z.00CD.B01.1706261549
 - IM111.88Z.0035.B01.1706261406
 - IM112.88Z.0058.B01.1706261628
 - IM121.88Z.004A.B01.1706261231
 - IM131.88Z.010C.B01.1706261419
 - IM141.88Z.0119.B01.1706261354
 - IM142.88Z.0119.B01.1706261827
 - IM143.88Z.0119.B01.1706261217
 - IM144.88Z.0180.B01.1706261218
 - IM151.88Z.0208.B01.1706261354
 - MB61.88Z.00C9.B01.1706261518
 - MB71.88Z.003A.B01.1706261443
 - MBA31.88Z.0064.B01.1706261714
 - MBA41.88Z.0078.B01.1706261217
 - MBA51.88Z.00F1.B01.1706261433
 - MBA61.88Z.0100.B01.1706261827
 - MBP101.88Z.00EF.B01.1706261418
 - MBP102.88Z.0107.B01.1706261827
 - MBP111.88Z.0139.B01.1706261010
 - MBP112.88Z.0139.B01.1706261355
 - MBP61.88Z.0058.B01.1706261104
 - MBP71.88Z.003A.B01.1706261020
 - MBP81.88Z.0049.B01.1706261922
 - MBP91.88Z.00D4.B01.1706261216
 - MM41.88Z.0043.B01.1706261836
 - MM51.88Z.0078.B01.1706261437
 - MM61.88Z.0107.B01.1706261217
 - MM71.88Z.0221.B02.1706261516
 - MP61.88Z.0117.B01.1706261354
 - IM161.88Z.0209.B02.1706261516
 - IM162.88Z.0209.B02.1706261516
 - IM171.88Z.0106.B01.1706260138
 - IM181.88Z.0147.B01.1706251744
 - IM183.88Z.0147.B01.1706251744
 - MB101.88Z.0150.B01.1706260154
 - MB81.88Z.0165.B01.1706261516
 - MB91.88Z.0155.B01.1706260138
 - MBA71.88Z.0167.B01.1706261032
 - MBP114.88Z.0173.B01.1706261516
 - MBP121.88Z.0168.B01.1706261516
 - MBP131.88Z.0206.B01.1706260154
 - MBP132.88Z.0227.B01.1706260154
 - MBP133.88Z.0227.B01.1706260154
 - MBP141.88Z.0161.B01.1706251744
 - MBP142.88Z.0161.B01.1706251744
 - MBP143.88Z.0161.B01.1706252330


SMCJSONs:

 - Mac-031B6874CF7F642A: 2.14f24
 - Mac-189A3D4F975D5FFC: 2.16f68
 - Mac-27ADBB7B4CEE8E61: 2.15f7
 - Mac-2BD1B31983FE1663: 2.19f12
 - Mac-35C1E88140C3E6CF: 2.12f143
 - Mac-35C5E08120C7EEAF: 2.24f32
 - Mac-3CBD00234E554E41: 2.18f15
 - Mac-42FD25EABCABB274: 2.22f16
 - Mac-473D31EABEB93F9B: 2.36f97
 - Mac-65CE76090165799A: 2.33f10
 - Mac-66E35819EE2D0D05: 2.37f20
 - Mac-77EB7D7DAF985301: 2.17f7
 - Mac-7DF21CB3ED6977E5: 2.13f15
 - Mac-81E3E92DD6088272: 2.21f92
 - Mac-937CB26E2E02BB01: 2.27f2
 - Mac-9AE82516C7C6B903: 2.35f105
 - Mac-9F18E312C5C2BF0B: 2.26f2
 - Mac-A369DDC4E67F1C45: 2.31f36
 - Mac-A5C67F76ED83108C: 2.38f7
 - Mac-B809C3757DA9BB8D: 2.34f2
 - Mac-BE0E8AC46FE800CC: 2.25f87
 - Mac-DB15BD556843C820: 2.33f10
 - Mac-E43C1C25D4880AD6: 2.28f7
 - Mac-F60DEB81FF30ACF6: 2.20f18
 - Mac-FA842E06C61E91C5: 2.23f11
 - Mac-FFE5EF870D7BA81A: 2.32f20


FirmwareFeatures(Mask):

 - IM131.88Z.010C.B01.1706261419: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - IM141.88Z.0119.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM142.88Z.0119.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM143.88Z.0119.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - IM144.88Z.0180.B01.1706261218: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xf007e137
 - IM151.88Z.0208.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xf807e137
 - MBA41.88Z.0078.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xd005e137
 - MBA51.88Z.00F1.B01.1706261433: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBA61.88Z.0100.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe007e137
 - MBP101.88Z.00EF.B01.1706261418: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBP102.88Z.0107.B01.1706261827: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MBP111.88Z.0139.B01.1706261010: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e137
 - MBP112.88Z.0139.B01.1706261355: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e137
 - MBP91.88Z.00D4.B01.1706261216: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xc005e137
 - MM51.88Z.0078.B01.1706261437: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xd005e137
 - MM61.88Z.0107.B01.1706261217: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe005e137
 - MP61.88Z.0117.B01.1706261354: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xe807e136
 - IM171.88Z.0106.B01.1706260138: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - IM181.88Z.0147.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - IM183.88Z.0147.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MB101.88Z.0150.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MB91.88Z.0155.B01.1706260138: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MBP131.88Z.0206.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP132.88Z.0227.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP133.88Z.0227.B01.1706260154: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e
 - MBP141.88Z.0161.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP142.88Z.0161.B01.1706251744: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e136
 - MBP143.88Z.0161.B01.1706252330: FirmwareFeaturesMask=0xff1fff3f | FirmwareFeatures=0xfc07e13e

 

 

 

New SMBIOS for my iMac 10,1 is now: IM101.88Z.00CD.B01.1706261549

 

what I have set FirmwareFeatures(Mask), FirmwareFeatures, PlatformFeature (there is not info)?

 

I use 10.13 DP2 version 17A291 and not show update in Mac App Store about "DP2 Update 1", please help  

 

clover 4102 

Bios date set: 06/26/17

------------------------------

 

:happymac:  Solved error installed script download DP2 update 1 from https://github.com/Piker-Alpha/HandyScripts/blob/master/install_1013_DP2_17A291m.sh

:thanks_speechbubble: Pike-Alpha https://github.com/Piker-Alpha/HandyScripts

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

New SMBIOS for my iMac 10,1 is now: IM101.88Z.00CD.B01.1706261549

 

what I have set FirmwareFeatures(Mask), FirmwareFeatures, PlatformFeature (there is not info)?

 

I use 10.13 DP2 and not show update in Mac App Store about "DP2 Update 1", please help

 

clover 4102

Bios date set: 06/26/17

What is your build number?

 

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Changed my mind. Testing latest clover 4102 I think with 0x02 platformfeature with USB install.

 

Edit: Still the same outcome with OSInstall.mpkg error.

 

Sent from my SM-G930F using Tapatalk

Did you try skylake or kabylake smbios?

Now, skylake system doesnt have osinstall.mpkg error when install fresh HS beta2 update1

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

Did you try skylake or kabylake smbios?

Now, skylake system doesnt have osinstall.mpkg error when install fresh HS beta2 update1

 

나의 LG-F800S 의 Tapatalk에서 보냄

Skylake smbios on Haswell laptop?

I'm willing to try, will post results when I do.

 

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine  :yes:

  • Like 3
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

@Sherlocks

 

I think I found the cause of the problem on my rig. I've been doing some more test for about 7 hours with different settings and FF,FFM and PF and none of them worked. So it got me thinking that what might be the cause.

It's "EmuVariableUefi-64.efi" without it I can install macOS High Sierra DP2 Update 1 from USB without a hiccup.

 

I tested the iMac 13,1 iMac13,2 iMac 17,1 iMac18,1 MacPro6,1 and all of them work perfectly fine on my rig with clover's default values, no additional FF or PFF or PlatformFeature

 

So that's conclude the test I've been doing so far.

 

and to the guys whom are experiencing the OSInstall.mpkg error please test the installer without the EmuVariableUefi-64.efi installed and let me know if it worked out for you as well.

 

These tests were conducted on my Asus P8H77-M LE, Core i3 3210, R9 270X GPU with all the other hard disk attached to the mainboard.

 

Cheers.

 

Update I've been using clover 4102 for all the test and it works perfectly fine :yes:

Okay we need to wait other's report like you said.

 

Thank you for hard work and test.

 

 

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

Okay we need to wait other's report like you said.

 

Thank you for hard work and test.

 

 

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

You're welcome my friend :)

 

Thanks to you and other hardworking coders of the community for the great job that you are doing with clover and making hackintosh possible. You guys are the best  :)  :yes:

  • Like 2
Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...