Jump to content

[pre-release] macOS High Sierra

fantomas

By fantomas,
in New Releases and Updates

 Share
3,737 posts in this topic

Recommended Posts

Matgen84
Matgen84
Posted
Posted

strange...

 

@cyberdevs

tell me exactly

 

since 4092 to 4101, there is not big difference for install HS.

 

tell me exactly

1.Bootloader version

2.FF

3.FFM

4.BIOSROM

 

i think. you maybe not try to use iMac18,1 info in r4101.

both r4092 and r4101 are same FF,FFM.

 

PF(platform feature). In Clover gui, only the decimal value (65535) was changed to hexadecimal 0xFFFF.

both 4092 and 4101 dont use PF. because of 0xFFFF

 

Enabled spctl and new command in Terminal: sudo spctl --master-disable. It's OK.

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

when fresh install macOS High Sierra DP 2 Update 1, in r4101, did you try imac18,1 bios version and date with clover default FF and FFM?

I can't use any other versions of clover rather that 4092 or 4097. As I told you before when I use clover builds that I build with Build Clover command after the first reboot whole system freezes so I have to reset the BIOS by using the Clear CMOS jumpers, so I have to stick to the 4092.

By using 4097 however the system won't freeze but it gives me the OSInstall.mpkg error unless I detach all the hard disks and only leave the one that I want to install macOS High Sierra on. 

strange...

 

@cyberdevs

tell me exactly

 

since 4092 to 4101, there is not big difference for install HS.

 

tell me exactly

1.Bootloader version r4092

2.FF 0xE97F537

3.FFM 0XFFFFFFFF

4.BIOSROM IM181.88Z.0147.B01.1706251744

PlatfromFeature: 00065535

 

i think. you maybe not try to use iMac18,1 info in r4101.

both r4092 and r4101 are same FF,FFM.

 

PF(platform feature). In Clover gui, only the decimal value (65535) was changed to hexadecimal 0xFFFF.

both 4092 and 4101 dont use PF. because of 0xFFFF

It is strange indeed.

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

I can't delete MLB infos, I don't find them.

 

Sorry for my english

 

tell me your fail case

1.Bootloader version

2.FF

3.FFM

4.BIOS version

 

i see latest DMI dump

1. Bootloader version: like you said, r4092

2.FF e907f537

3.FFM ffffffff

4.BIOS version

Vendor: Apple Inc.
Version: IM131.88Z.010C.B01.1706261419
Release Date: 06/26/2017

 

did you get fail like this?

1.Bootloader version r4097

2.FF e907f537

3.FFM ffffffff

4.BIOS version

Vendor: Apple Inc.
Version: IM131.88Z.010C.B01.1706261419
Release Date: 06/26/2017
Link to comment
Share on other sites
chris1111
chris1111
Posted
Posted
I look here and I do not understand too much ?
For my part I do not need to put any information SMBIOS to create a USB Installer MacOS High Siera Beta 1 , Beta 2 and Beta 2+1
This since Clover r4097 and higher.

 

This also depends on the method of installation
  • Like 1
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

 

I look here and I do not understand too much ?
For my part I do not need to put any information SMBIOS to create a USB Installer MacOS High Siera Beta 1 , Beta 2 and Beta 2+1
This since Clover r4097 and higher.

 

This also depends on the method of installation

 

 

chris1111

 

did you try to fresh install HS Beta2 update1 in r4101?

Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

...

I've been doing some more tests and I'm glad to tell you that with clover 4092, iMac18,1 SMBIOS with BIOS version:IM181.88Z.0147.B01.1706251744 BIOS Release Date: 06/26/2017 I was able to install macOS High Sierra DP 2 Update 1 with no problem, No OSInstall.mpkg error with all of my other Hard Disk Drives attached and with having clover installed on the EFI partition on all other hard disks.

..

 

Whoaa..  :wub:but if I'm using @cyberdev's r4092 (BOOT.efi && CLOVERX64.efi only) together with iMac18,1 SMBIOS with BIOS version:IM181.88Z.0147.B01.1706251744 BIOS Release Date: 06/26/2017, I always get this awesome red on black "RIP" logs; right b4 clover bootscreen appears. Fyi, my working SMBios should to be MBP10,1. Even if I got boot with iMac 18,1, I can't see my Graphics (GF119) to works (blackcreen). I'm using Legacy-GPT scheme; trying Install macOS 10.13 Beta DP1. Couldn't get any log.. hmmmb.

post-826765-0-82141800-1499012625_thumb.jpg

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

I can't use any other versions of clover rather that 4092 or 4097. As I told you before when I use clover builds that I build with Build Clover command after the first reboot whole system freezes so I have to reset the BIOS by using the Clear CMOS jumpers, so I have to stick to the 4092.

By using 4097 however the system won't freeze but it gives me the OSInstall.mpkg error unless I detach all the hard disks and only leave the one that I want to install macOS High Sierra on. 

It is strange indeed.

 

you said

1.Bootloader version r4092

2.FF 0xE97F537

3.FFM 0XFFFFFFFF

4.BIOSROM IM181.88Z.0147.B01.1706251744

PlatfromFeature: 00065535

 

1. okay

2. default both 4092 and 4101

3. default both 4092 and 4101

4. according your model

5. PlatformFeature - i said "PF(platform feature). In Clover gui, only the decimal value (65535) was changed to hexadecimal 0xFFFF.".  there is no difference. because PF is disable(0xFFFF) both 4092 and 4101.

Yes its work 

 

okay. thank you so much

Link to comment
Share on other sites
Matgen84
Matgen84
Posted
Posted

 

tell me your fail case

1.Bootloader version

2.FF

3.FFM

4.BIOS version

 

i see latest DMI dump

1. Bootloader version: like you said, r4092

2.FF e907f537

3.FFM ffffffff

4.BIOS version

Vendor: Apple Inc.
Version: IM131.88Z.010C.B01.1706261419
Release Date: 06/26/2017

 

did you get fail like this?

1.Bootloader version r4097

2.FF e907f537

3.FFM ffffffff

4.BIOS version

Vendor: Apple Inc.
Version: IM131.88Z.010C.B01.1706261419
Release Date: 06/26/2017

 

 

I didn't tried version 4097.

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

@Sherlocks

 

This the snapshot that I took from clover and I posted earlier. I don't know if you seen it but here it is anyway.


These are de default values of the clover I didn't change anything


@chris1111

 

I had no problem installing the DP,DP1 and DP2, but ever since the update 1 (or the first public beta 17A291m) came out, it gave me the OSinstall.mpkg error I tried to update directly from App Store and I also tried the clean install option but I had no luck, so I started to test the different approaches which all of them failed expect for the one that I posted here, I don't know exactly why but it is the only working solution that I have found so far. There are some other guys whom have the same problem so I what I've found so far.

post-1011040-0-68360700-1499013240_thumb.png

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

@Sherlocks

 

This the snapshot that I took from clover and I posted earlier. I don't know if you seen it but here it is anyway.

These are de default values of the clover I didn't change anything

 

i saw it. but there is no difference in both 4092 and 4101.

 

i said

1.FF 0xE97F537 - same(4092,4097,4101)
2.FFM 0XFFFFFFFF - same(4092,4097,4101)
3.BIOSROM IM181.88Z.0147.B01.1706251744 - in r4092, use dp1 bios rom info, i just updated bios rom info followed beta2 up1 in 4101. (4092=4097, 4101)
4.PlatfromFeature: same(4092,4097,4101)
  • Like 2
Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

you said

1.Bootloader version r4092

2.FF 0xE97F537

3.FFM 0XFFFFFFFF

4.BIOSROM IM181.88Z.0147.B01.1706251744

PlatfromFeature: 00065535

 

1. okay

2. default both 4092 and 4101

3. default both 4092 and 4101

4. according your model

5. PlatformFeature - i said "PF(platform feature). In Clover gui, only the decimal value (65535) was changed to hexadecimal 0xFFFF.".  there is no difference. because PF is disable(0xFFFF) both 4092 and 4101.

If there is any particular set of tests that you like me to run I'll be more than happy to oblige to resolve the issue at hand so if there is anything you like me to do please just let me know.

 

i saw it. but there is no difference in both 4092 and 4101.

 

i said

1.FF 0xE97F537 - same(4092,4097,4101)
2.FFM 0XFFFFFFFF - same(4092,4097,4101)
3.BIOSROM IM181.88Z.0147.B01.1706251744 - in r4092, use dp1 bios rom info, i just updated bios rom info followed beta2 up1 in 4101. (4092=4097, 4101)
4.PlatfromFeature: same(4092,4097,4101)

 

Ok I see.

Guys can anyone send me a link for clover 4101 please, maybe the version I'm using is defected.

Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

Here U go  :)

Thanks a lot :)

@Sherlocks

 

Is it possible that the problem might be because of using an older CPU architecture like Ivy Bridge? I've been using my older pc for these tests which has an Ivy Bridge CPU, Matgen84 uses the same architecture.

 

I'm installing macOS High Sierra as we speak on my SkyLake machine and it's working perfectly OK with clover r4101. I'm just curious to know why on some machines it's resulting to OSInstall.mpkg. @SavageAUS has a haswell cpu on his laptop and he is experiencing the same problem.

 

I'm just curious to know why it is happening. Can you please enlighten me on the subject?

  • Like 1
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Thanks a lot :)

@Sherlocks

 

Is it possible that the problem might be because of using an older CPU architecture like Ivy Bridge? I've been using my older pc for these tests which has an Ivy Bridge CPU, Matgen84 uses the same architecture.

 

I'm installing macOS High Sierra as we speak on my SkyLake machine and it's working perfectly OK with clover r4101. I'm just curious to know why on some machines it's resulting to OSInstall.mpkg. @SavageAUS has a haswell cpu on his laptop and he is experiencing the same problem.

 

I'm just curious to know why it is happening. Can you please enlighten me on the subject?

 

okay. we got a great point now.

 

first we need to check install problem(OSinstall.pkg) on each intel cpu architecture.

 

checklist

1.lynnfield

2.sandy

3.ivy - problem

4.haswell

5.broadwell

6.skylake - me, cyberdevs

7.kabylake

 

red is problem.

blue is no problem.

 

to clear issue, first check

try to change ivy smbios to haswell or skylake or kabylake smbios on your ivy build.

 

it's not potential fix. we are going to temporarily check what problems are occurring and where 

  • Like 2
Link to comment
Share on other sites
Cyberdevs
Cyberdevs
Posted
Posted

okay. we got a great point now.

 

first we need to check install problem(OSinstall.pkg) on each intel cpu architecture.

 

checklist

1.lynnfield

2.sandy

3.ivy - problem

4.haswell has also been reported as problematic by SavageAUS.

5.broadwell

6.skylake - me, cyberdevs

7.kabylake

 

red is problem.

blue is no problem.

 

to clear issue, first check

try to change ivy smbios to haswell or skylake or kabylake smbios on your ivy build.

 

it's not potential fix. we are going to temporarily check what problems are occurring and where 

Ok but the sad thing is that I just can't use the 4101 on my Ivy Bridge because of the freezing problem and unfortunately I don't have any other system at my disposal right now to test it.

But I will test the clover that Badruzeus sent me tomorrow to see if it makes any difference. I will check with both iMac17,1 and iMac18,1 later to see if I still get frozen.

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Well that's

 

Ok but the sad thing is that I just can't use the 4101 on my Ivy Bridge because of the freezing problem and unfortunately I don't have any other system at my disposal right now to test it.

But I will test the clover that Badruzeus sent me tomorrow to see if it makes any difference. I will check with both iMac17,1 and iMac18,1 later to see if I still get frozen.

Okay. I ask you again.

Can your skylake build install fresh HS BETA2 Update1 without OSinstall.pkg issue in clover r4101 default FF/FFM?

 

Did you check surely?

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Yes I can confirm that it works perfectly fine on my skylake build. With clover 4104 and default FF/FFM

 

 

Sent from my iPhone using Tapatalk

Great. Thank you for clear report.

 

I will wait your news. Good luck cyberdevs

 

나의 LG-F800S 의 Tapatalk에서 보냄

  • Like 1
Link to comment
Share on other sites
Loloflat6
Loloflat6
Posted
Posted

Ok but the sad thing is that I just can't use the 4101 on my Ivy Bridge because of the freezing problem and unfortunately I don't have any other system at my disposal right now to test it.

But I will test the clover that Badruzeus sent me tomorrow to see if it makes any difference. I will check with both iMac17,1 and iMac18,1 later to see if I still get frozen.

 

Same for me with FakeCPUID 0x0306A0 for my G1840 celeron

  • Like 1
Link to comment
Share on other sites
Badruzeus
Badruzeus
Posted
Posted

Hi @Sherlocks, for report only..

 

I recently use Enoch r2885 (Test_Version) for trying 10.13 DP1 from USB, it boots just fine begun with "Language Selection Menu" (afaik this menu doesn't appear if using Clover). Just thinking that I could bypass the issue.. but unfortunately it also gives same "OSInstall.mpkg" error message after clicking next button below.  :lol:. What different is I placed "/System/Library/Kernels/kernel" (since Enoch / Chameleon ask this). OFC, using a working SMBios from Sierra & below versions (MBP10,1), and also 2017 Platform Datas (iMac18,1 Bios Version & Release date too, etc). But it doesn't make a sense.

 

The only test I didn't try yet is plugging out my SATA drive since (looks like) another OSes inside it cause problem, or another reasons. Thanks

(still using same mach as seen on my signature, tomorrow test)

 

 

post-826765-0-48165500-1499021599_thumb.jpg

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...