Lucy183 Posted June 22, 2017 Share Posted June 22, 2017 https://www.sendspace.com/file/g6kncs Just remember to install from the HS itself. Installed from safe boot with kext utility and still can't boot, only in safe boot Sent from my HTC One M9 using Tapatalk Link to comment Share on other sites More sharing options...
stehor Posted June 22, 2017 Share Posted June 22, 2017 @cyberdevs tested 4 hdds 3 WD/one seagate no work on hs/via sata or seagate backup plus usb 3.0 drive caddy also kingston ssd now v300 60gb not working. only one working so far is toshiba ssd q series pro 256gb. not tested samsung 850 pro 128gb yet. testing done via clover 4098 and beta1and hfsplus and apfs.efi from beta 2 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2017 Share Posted June 22, 2017 @cyberdevs tested 4 hdds 3 WD/one seagate no work on hs/via sata or seagate backup plus usb 3.0 drive caddy also kingston ssd now v300 60gb not working. only one working so far is toshiba q series pro 256gb. not tested samsung 850 pro 128gb yet Thanks for the reply. I just downloaded the DP Installer and I'm going to give it a test on a 2.5" SATA WD 750 GB and see how it works. The first DP was a disaster regarding the mechanical HDDs I tested it on 4 different types of HDDs and it was a no go. I mean it was so slow. So I will test the ned DP to see how it works and I will post my test results here. Thanks again Link to comment Share on other sites More sharing options...
Wppley2 Posted June 22, 2017 Share Posted June 22, 2017 Installed from safe boot with kext utility and still can't boot, only in safe boot Sent from my HTC One M9 using Tapatalk If you have ATIInject checked, uncheck it. Link to comment Share on other sites More sharing options...
Lucy183 Posted June 22, 2017 Share Posted June 22, 2017 If you have ATIInject checked, uncheck it.Tried with inject and without inject, actually the PC is freezing when reaching the IOGraphics line. Sent from my HTC One M9 using Tapatalk Link to comment Share on other sites More sharing options...
Wppley2 Posted June 22, 2017 Share Posted June 22, 2017 Sorry, but I have to leave now. I do not know what might be causing a problem, but then I try to find the solution. Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2017 Share Posted June 22, 2017 Ok guys, APFS is no go on a WDC 750 GB 5400 RPM that was connected to a 3.0 GB/s SATA port. Next test will be on a 1TB WDC 7200 RPM on a 6.0 GB/s SATA port. Fingers crossed. Link to comment Share on other sites More sharing options...
telepati Posted June 22, 2017 Share Posted June 22, 2017 Guys anyone test it beta 2 still work NVME Drive natively? Link to comment Share on other sites More sharing options...
chris1111 Posted June 22, 2017 Share Posted June 22, 2017 Ok guys, APFS is no go on a WDC 750 GB 5400 RPM that was connected to a 3.0 GB/s SATA port. Next test will be on a 1TB WDC 7200 RPM on a 6.0 GB/s SATA port. Fingers crossed. I screwup one of my HD WD250BEKT last week with APFS Install Garbage I used this only in SSD and its the best 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2017 Share Posted June 22, 2017 I screwup one of my HD WD250BEKT last week with APFS Install Garbage I used this only in SSD and its the best Bummer! It really takes the juice out of the platters I even tried installing DP1 on a 14,3 iMac and it didn't even boot! Link to comment Share on other sites More sharing options...
chris1111 Posted June 22, 2017 Share Posted June 22, 2017 Bummer! It really takes the juice out of the platters I even tried installing DP1 on a 14,3 iMac and it didn't even boot! I think APFS file system is optimise for SSD but maybe I am wrong ? Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2017 Share Posted June 22, 2017 I think APFS file system is optimise for SSD but maybe I am wrong ? Actually you're right but Apple claims that it would work with traditional hard disks as well. Compatibility Can I use Apple File System with my existing hard disk drive? Yes. Apple File System is optimized for Flash/SSD storage, but can also be used with traditional hard disk drives (HDD) and external, direct-attached storage. Can I reshare APFS-formatted volumes using a network file-sharing protocol? Yes, you can share APFS-formatted volumes using the SMB or NFS network file-sharing protocol. You cannot share APFS-formatted volumes using AFP. The AFP protocol is deprecated. Can I use my third-party disk utilities with an APFS-formatted hard disk? Existing third-party utilities may need to be updated to support Apple File System. Consult the utility's documentation, or contact the vendor for compatibility information. Can I boot macOS 10.13 from an APFS-formatted hard disk? Yes. macOS 10.13 supports Apple File System for both bootable and data volumes. Source: https://developer.apple.com/library/content/documentation/FileManagement/Conceptual/APFS_Guide/FAQ/FAQ.html Link to comment Share on other sites More sharing options...
Kynyo Posted June 22, 2017 Share Posted June 22, 2017 APFS.efi from DP2. (545KB) APFS.ffs from DP2. (262KB) 1 Link to comment Share on other sites More sharing options...
chris1111 Posted June 22, 2017 Share Posted June 22, 2017 anybody have this on Beta 2 APFS format disk ? Link to comment Share on other sites More sharing options...
Cyberdevs Posted June 22, 2017 Share Posted June 22, 2017 anybody have this on Beta 2 APFS format disk ? I formatted the drive I can't confirm it right now but after I install it on a new hard disk I will let you know if have it or not. 1 Link to comment Share on other sites More sharing options...
chris1111 Posted June 22, 2017 Share Posted June 22, 2017 I formatted the drive I can't confirm it right now but after I install it on a new hard disk I will let you know if have it or not. I hidden the Folder temporaire because I dont want to delete them There is nothing in it 1 Link to comment Share on other sites More sharing options...
camillionario Posted June 22, 2017 Share Posted June 22, 2017 I have it 1 Link to comment Share on other sites More sharing options...
chris1111 Posted June 22, 2017 Share Posted June 22, 2017 I have it Ok thanks Link to comment Share on other sites More sharing options...
hnak Posted June 22, 2017 Share Posted June 22, 2017 Guys anyone test it beta 2 still work NVME Drive natively?Yes, SM961 works. 1 Link to comment Share on other sites More sharing options...
erice Posted June 22, 2017 Share Posted June 22, 2017 It still works for me. 1 Link to comment Share on other sites More sharing options...
xtddd Posted June 23, 2017 Share Posted June 23, 2017 I use to change this: <key>Mac-F60DEB81FF30ACF6</key> <string>none</string> config1>none from time ago it works for me with other methods I have problem (maybe I am not able to use it in right way! hi, you enable nvidia without webdriver? Link to comment Share on other sites More sharing options...
SteveRings Posted June 23, 2017 Share Posted June 23, 2017 Beta 2 install issue For those of you having difficulties installing with message /System/Installation/Packages/macOSUpd10.13.pkg not found, build one. You'll find the macOSUpd10.13.pkg in the install libraries after the updoad. Just copy the Macinstall version into the path and do the install as normal. Link to comment Share on other sites More sharing options...
Pavo Posted June 23, 2017 Share Posted June 23, 2017 i really will like to take high sierra for a test drive but i'm going to wait a little bit more the good news about native nvme support is awesome, it make everything easier and simple but i will also like native nvidia support i mean OS X default web drivers already integrated on HS for at least hand full # of cards i had two 970 gaming sold them both and bought myself a 1080 gaming yes the card does work perfectly fine but having native support is much better than having to wait for web drivers to have full acceleration is really no big deal, i will live anyway but it will be awesome to be able to install high sierra and have OS X default web drivers native support Who said anything about having native Nvidia Pascal support? Link to comment Share on other sites More sharing options...
PMheart Posted June 23, 2017 Share Posted June 23, 2017 Lilu and NvidiaGraphics don't work on Beta 2 for me (EFI/Clover/kexts/others... or 10.13) ? I tried also boot-args: -llilubeta -ngfxbeta Sorry for my english Hmm, it seems that @fabiosun has already succeeded? 1 Link to comment Share on other sites More sharing options...
PMheart Posted June 23, 2017 Share Posted June 23, 2017 @PMHeart For graphic policy i have to use old 10.12.5 policy kext patched with config1>none Other method are not working for me Only AppleGraphicsDevicePolicy.kext from 10.12.5? Or the whole /System/Library/Extensions/AppleGraphicsControl.kext? 1 Link to comment Share on other sites More sharing options...
Recommended Posts