foxdanger Posted May 3, 2017 Share Posted May 3, 2017 It's alive! Thx to the master MaLd0n and two good friends, Lucas David and Giesteira Paulo my new machine it's running the MacOS Sierra 10.12.4 PERFECT! SCREENSHOTS AT THE END OF THE POST. First of all I want to say THANK YOU A LOT to Daniel (MaLd0n) da Insanely Mac (esse cara é um gênio), Giesteira Paulo, Samuel Cabral e Lucas David do Hackintosh Brasil. GeekBench CPU Result: https://browser.geekbench.com/v4/cpu/2737610 THIS IS ONLY FOR THIS MOTHERBOARD: Gigabyte z270X Aorus Gaming 5IT WILL NOT WORK IN ANY OTHER MOTHER BOARD!!! DO IT AT YOUR OWN RISK! MOBO: z270X Aoros Gigabyte Gaming 5 PROC: i7 7700k + Cooler Master Hyper X212 GPU: MSI GTX 1070 8GB DDR5 RAM: 32GB Ram Crucial Elite STORAGE 1: SSD 480GB Kingston STORAGE 2: SSD 128GB Samdisk <- Place where I installed my MacOS STORAGE 3: SSHD Seagate 1TB + Cooler HD STORAGE 4: HD Seagate 2TB FONT: EVGA 600W BQ So, this is what we did: 1 - Download this archive, you gonna use it during all the install. z270x - i7700k - GTX 1070 - MacOS.zip 2 - Get a Sierra 10.12 image. 3 - Create a boot pendrive with WinDiskImage. 4 - Go to EFI partition on the pendrive, replace the “CLOVER” folder for the one inside the "Pendrive Boot Clover folder" from the archive on the step 1. Delete the original one and replace with the one inside the archive from step 1. 5 - Go to your bios and set these options (*really important ones): - Bios First boot - Pendrive * Fast boot - disabled * Windows 8/10 features - other os * Lan pxe boot option ROM - disabled Storage boot control - UEFI * Other PCI devices - UEFI - Peripherals Onboard lan Controller - enabled Intel platform thrust technology ptt - disabled * SW guard extension - software controlled USB 3.0 dac-up 2 - normal Front USB 3.0_1 - normal Intel bios guard technology - disabled * - Peripherals - USB configuration Legacy USB support - enabled * Xhci hand off - enabled * USB mass storage driver support - enabled - Peripherals - Sata and RST configuration Sata controllers - enabled Sata mode selection - AHCI * Aggressive LPM support - enabled - Chipset VT-d - disabled * Internal graphics - auto All the other options - enabled - Power Platform Power management - disabled * Ac back - always off Power on by keyboard - disabled Power on by mouse - disabled Erp - disabled Soft off by power button - instant off Power loading - auto Resume by alarm - disabled Rc6 render standby - enabled 6 - Boot your pendrive and on the Clover boot screen choose the option "Boot Mac OS Install MacOS". 7 - In the first screen choose the language and than at the top menu open the application DISK UTILITY. 8 - Select the HD where you gonna install the OS and click on ERASE button. Use these options: - Name: Any name you want - Format: Mac OS Extended (Journaled) - Scheme: GUID 9 - Click on erase and wait for the formating. 10 - Close the disk utility and back to the install follow the steps, select the HD you already formated and perform the install. 11 - After the install, DON'T remove the pendrive yet. You need it to boot the system for now. Boot from pendrive and now on the Clover boot screen choose the HD you already installed the system, "Boot from MacOS". 12 - Now you have the system on, install the latest version of Clover boot (the install pkg is inside the archive from step 1). At the “INSTALLATION TYPE” screen, click on the “CUSTOMIZE” button and check the boxes only for these options: - Install for UEFI Boot Only - Install Clover in the ESP - Bootloader -> Don’t update MBR and PBR Sectors - Themes (any you want) - Drivers64UEFI -> Fat-64 - Drivers64UEFI -> PartitionDxe-64 - Install Clover Preference Pane (optional) 13 - Click on install and finish the installation. Now you can remove your Boot Pendrive. 14 - Open the Clover Configurator and goes to the “MOUNT EFI”. At the right column theres a “EFI Partitions” box with all the EFI partitions. Look for the one of the mac and click on “MOUNT PARTITION” and then click on “OPEN PARTITION”. 15 - Inside the folder EFI there’s a folder called “CLOVER”. Repleace this folder with the one inside the “System Boot Clover Folder” which you can find in the archives you downloaded at the step 1. Just delete the original one on EFI partition and paste the other one in the same place. 16 - Run the Olarila.command inside the archives of the step 1 and wait for the “completed” message. 17 - Restart the system WITHOUT the boot pendrive. Go to the BIOS Settings and change the first option boot to the HD where u installed the MacOS. Save and reboot. 18 - Download this DMG and install the update from 10.12 to 10.12.4. THIS IS IMPORTANT! THE NVIDIA 10xx VIDEO CARD SERIES ONLY WORKS ON THIS OS VERSION! https://support.apple.com/kb/DL1910?locale=en_US 19 - Now the last step, install NVidia Driver. Download the latest version of the NVidia Web Driver and install it. http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-04192017/(choose the latest version for your system - 10.12.4 in this case). 20 - Download and install NVidia Cuda Drivers: http://www.nvidia.com/object/mac-driver-archive.html YOU ARE READY TO GO!!! Patches used by Daniel (MaLd0n) in the DSDT.aml: - FIX ERRORS AND WARNINGS - HPET - SATA - DTGP - DMAC - SLPB - DARWIN - LPC - XHCI - PLUGIN TYPE - HDAS to HDEF - HDEF - RTC - IRQs - SBUS - BUS1 - MCHC - ALS0 - SHUTDOWN - LAN - USBX - PMCR - EC - PNLF - HDMI NVIDIA / ATI What works: - Intel i7 7700k - OK - Intel HD Graphics 630 - OK - NVidia GTX Video Cards (with pascal, series 10xx) and Cuda Drivers - OK - Memory RAM - OK - Realtek ALC1220 Audio Controller - OK - All back panel audio ports (Internal speakers, 2 line outs, digital output) - OK - DisplayPort Audio output from NVidia GTX - THERE’s ONLY AUDIO THROUGH THE DISPLAYPORT, NO AUDIO THROUGH THE HDMI. But you can easily use a DP - HDMI cable. - Intel PCI Express Gigabit Ethernet Controller RJ45 Port - OK - Qualcomm Atheros Killer E2500 PCI Express Gigabit Ethernet Controller RJ45 Port - OK - All USB Ports, including 3.0 USB - OK - System Power Settings - OK - All the hard drives from my computer, including the ones formmated for windows working - OK (of course the ones formmated on windows, only for read, no write) What doesn’t work: - Boot windows from Clover Boot Screen. But you can use the F12 key to go to BIOS Boot Screen and select the Windows HD to boot. It’s fine - Front panel audio ports So, resuming the system is working PERFECT! Like a charm! Everything works and the machine is CRAZY fast now! Hope it goes fine for everyone too. Cya! SCREENSHOTS: 7 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 3, 2017 Share Posted May 3, 2017 Very Good! 1 Link to comment Share on other sites More sharing options...
Kynyo Posted May 9, 2017 Share Posted May 9, 2017 Could this tutorial be applied to Gigabyte Z270X-UD5? Looks pretty similar. I intend to buy that mobo and i want to be sure. Thanks for this great work to everyone involved. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 9, 2017 Share Posted May 9, 2017 Could this tutorial be applied to Gigabyte Z270X-UD5? Looks pretty similar. I intend to buy that mobo and i want to be sure. Thanks for this great work to everyone involved. U can use all files, but not a DSDT, u need DSDT for ur mobo. Link to comment Share on other sites More sharing options...
VirusX Posted May 12, 2017 Share Posted May 12, 2017 Thanks for your guide. Regarding the uploaded archive on mega.nz: I would recommend creating at least on other mirror that is not a one-click-hoster (preferably dropbox/google drive), since those hosters delete files after a certain time of inactivity, or randomly get closed down. If the archive isn't too big, you can also attach it to your post. Or at least the smaller files. 1 Link to comment Share on other sites More sharing options...
filo25 Posted May 23, 2017 Share Posted May 23, 2017 Thank you very much for the guide! I had to change a few things up for me, as it seems like my Pendrive that I was using to create the boot wasnt working properly (I was using a 64gb one, if that makes a difference). So I skipped the Boot Pendrive steps entirely. What I did instead, is use another mac to install Sierra 10.12 directly onto the HD via USB. Then I installed the given Clover install onto the HD, and copied the given folder for "System". After that, I changed the Bios settings on the hackintosh, and booted it up through the HD and followed the steps to update it etc. Works perfectly for me, however 4k does not seem to be working. I can get the hackintosh to run at home with my 144hz 1080p monitor via DVI, as well as my 1080p monitor via HDMI. However, when I bring it over to my studio, we have a 4k 60hz tv as the main display, and nothing seems to be working. I get the black screen, as if it isnt recognizing either the GPU or the display it self. I was able to plug in another monitor, and then plugin the 4k TV as a secondary and it seemed to work (however, only at 1080p as that is what my other display was, and it only works in mirror mode). Which leads me to believe it has something to do with the 4k. I have an HDMI 2.0 cable, and it didnt work through that (black screen on startup). I tried a HDMI to DP 1.2 adapter, still same thing. Next i will be trying a different HDMI to DP1.2 adapter that has been known to work with 4k for others. We will see how that goes, and if anyone has any suggestions please let me know. I do realize that it appears that mac does not natively have support for HDMI 2.0, but some have gotten it to work with the HDMI to DP1.2 adapter, the one in particular is the one from Club3D. Link to comment Share on other sites More sharing options...
filo25 Posted May 24, 2017 Share Posted May 24, 2017 Success with the Club3D HDMI to DP1.2!! If anyone is having issues getting 4k, thats the one to get. Everything now seems to be working perfectly. Thank you . 1 Link to comment Share on other sites More sharing options...
foxdanger Posted May 26, 2017 Author Share Posted May 26, 2017 Success with the Club3D HDMI to DP1.2!! If anyone is having issues getting 4k, thats the one to get. Everything now seems to be working perfectly. Thank you . Can you tell me if you got 10bits output with this DP1.2 cable? Link to comment Share on other sites More sharing options...
filo25 Posted May 29, 2017 Share Posted May 29, 2017 Can you tell me if you got 10bits output with this DP1.2 cable? How do I find this out? Link to comment Share on other sites More sharing options...
CrashMidnick Posted June 5, 2017 Share Posted June 5, 2017 To boot windows via Clover, try to re-enable the windows feature in your bios (where you changed by other OS). It worked for me and I am still able to boot to Sierra. It cost nothing, give it a try Link to comment Share on other sites More sharing options...
lenhathuy153 Posted July 20, 2017 Share Posted July 20, 2017 Can help me to fix some issues? This is my PC: 1. Cpu core i5 7600k 2. Ram 16gb. 3. Mainboard Gigabyte Aorus Z270x Gaming 5 (same your mainboard) 4. SSD Plexton 128gb 5. GPU: I use on-board gpu in first. I will buy rx580 later. 6. PSU: Seasonic S12II 620W bronze I followed your step and installed successful Sierra. But I have 2 issues: 1. My graphic card only show graphic 7 mb 2. The sound is very low. I config max volume but it's very low. My system information show in PCI tab: Realtek ALC1220 Audio Controller: driver installed YES.This is my first time I install hackintosh. Please help me to fix it. Thank you so much. Link to comment Share on other sites More sharing options...
Nubira Posted July 20, 2017 Share Posted July 20, 2017 For video editing/colorgrading and correction you need a dedicated monitor card something like the blackmagic design intensity pro or the blackmagic design intensity pro 4k or if you get the the ga alpine ridge pcie to thunderbolt add in card and the minimonotor and recorder external thunderbolt cards. Just using the graphicscard or the onboard graphics will not work very good. If you want to watch movies or to game with your rig well thats another story. Link to comment Share on other sites More sharing options...
daywalker12 Posted July 24, 2018 Share Posted July 24, 2018 Hey, I'm going to instal macOS on this motherboard but i have i5 6500 (skylake) CPU and GTX 1050 (Pascal) GPU. Can you reupload your files. The link is dead. I appreciate your help. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 24, 2018 Share Posted July 24, 2018 22 minutes ago, daywalker12 said: Hey, I'm going to instal macOS on this motherboard but i have i5 6500 (skylake) CPU and GTX 1050 (Pascal) GPU. Can you reupload your files. The link is dead. I appreciate your help. check here https://www.insanelymac.com/forum/topic/321872-guide-sierra-high-sierra-mojave-on-mobos-serie-100-200-300-skylake-kabylake-coffeelake-dsdt/ Link to comment Share on other sites More sharing options...
Nubira Posted April 22 Share Posted April 22 This old thread still help me even in 2024! The case is my harddrive with my original Sierra install on crashed. I still run Sierra cause it has been running just fine through out the years and I mostly use it for an older version of Davinci Resolve. I have an old Nvidia 8 gig gtx 1080 card in it so there is no reason to upgrade to newer versions. I manage to reinstall Sierra on an old HDD so it is running fine again but I get no audio over the HDMI port no more. If someone remembers how to make audio on the HDMI port work please give me some tips. I have been pulling my hair for a week now looking for info on audio with this videocard but so far I got nothing. Thanks Link to comment Share on other sites More sharing options...
Slice Posted April 22 Share Posted April 22 If you mean Nvidia HDMI output then I may propose VoodooHDA will work with it. Link to comment Share on other sites More sharing options...
Nubira Posted April 23 Share Posted April 23 (edited) On 4/22/2024 at 8:54 PM, Slice said: If you mean Nvidia HDMI output then I may propose VoodooHDA will work with it. I bought an active displayport to HDMI adapter and it fixed that problem. On this gtx 1080 videocard there are two displayports and audio output probably work on both. I have a gigabyte alpine ridge thunderbolt card in this computer and if I make it work like a real mac card it will probably allow even more displays. Edited April 23 by Nubira 1 Link to comment Share on other sites More sharing options...
Recommended Posts