MaLd0n Posted April 22, 2019 Author Share Posted April 22, 2019 19 minutes ago, baask1 said: Hello, My system is "Intel Xeon E5440 @ 2.83GHz, 8,00GB Dual-Channel DDR3, ASUSTeK Computer INC. P5G41C-M LX (LGA775), 2047MB NVIDIA GTX 960 2 GB, NVIDIA High Definition Audio, Realtek PCIe GBE Ailesi Denetleyici" Can i install high sierra and how? should i change config.plist file? so, i do not know how to edit this and how to edit dsdt. can you help me about that? this is my config.plist file: config.plist config.plist.zip 1 Link to comment Share on other sites More sharing options...
baask1 Posted April 22, 2019 Share Posted April 22, 2019 (edited) 16 hours ago, MaLd0n said: config.plist.zip thank you for your help. what is the difference between the one i shared and the other one you shared? sorry but i have faced an error: Edited April 22, 2019 by baask1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 22, 2019 Author Share Posted April 22, 2019 55 minutes ago, baask1 said: thank you for your help. what is the difference between the one i shared and the other one you shared? sorry but i have faced an error: check if ur processor have sse4.1 Link to comment Share on other sites More sharing options...
baask1 Posted April 22, 2019 Share Posted April 22, 2019 4 hours ago, MaLd0n said: check if ur processor have sse4.1 this site says it has. http://cpuboss.com/cpu/Intel-Xeon-E5440 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 22, 2019 Author Share Posted April 22, 2019 54 minutes ago, baask1 said: this site says it has. http://cpuboss.com/cpu/Intel-Xeon-E5440 create new usb stick, check image, cant perform kext scan Link to comment Share on other sites More sharing options...
baask1 Posted April 23, 2019 Share Posted April 23, 2019 10 hours ago, MaLd0n said: create new usb stick, check image, cant perform kext scan how can i fix it? Link to comment Share on other sites More sharing options...
MaLd0n Posted April 23, 2019 Author Share Posted April 23, 2019 3 hours ago, baask1 said: how can i fix it? create again with this tool Install clover and use clover folder https://olarila.com/forum/viewtopic.php?f=28&t=8222 Link to comment Share on other sites More sharing options...
wolfcola Posted April 24, 2019 Share Posted April 24, 2019 Hey MaLd0n can you do an edit for me. My specs if it matters: i7 4790k GA-Z97-HD3 (rev. 1.0) MSI VGA Graphic Cards RX 580 GAMING X 8G R9280X-DC2T-3GD5 Thanks! Send me Wolfpepsi-iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted April 24, 2019 Author Share Posted April 24, 2019 6 hours ago, wolfcola said: Hey MaLd0n can you do an edit for me. My specs if it matters: i7 4790k GA-Z97-HD3 (rev. 1.0) MSI VGA Graphic Cards RX 580 GAMING X 8G R9280X-DC2T-3GD5 Thanks! Send me Wolfpepsi-iMac.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
lowlevel Posted April 30, 2019 Share Posted April 30, 2019 (edited) Hi, MaLd0n can you help an edit this for me. OWN U BEER & BTHNX ProductName : Mac OS X ProductVersion: 10.11.6 BuildVersion: 15G31 Bootargs : nv_disable=1 Kernel : Darwin Kernel Version 15.6.0: Thu Jun 23 18:25:34 PDT 2016 Model ID : iMac10,1 KernelMode: x86_64 CPU TYPE : Intel(R) Core(TM)2 Quad CPU @ 2.93GHz CPU ID : Ox6F7 (1783) Cores : 4 Cores, 4 Threads @ 3006MHz Bus: 333MHz FSB: 1332MHz Caches : L1i:32Kb L1d:32Kb L2:4096Kb L3:0Kb CPU Features : FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM PBE SSE3 DTES64 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM SYSCALL XD EM64T LAHF Send me iMac-Nickolas.zip Edited April 30, 2019 by lowlevel Link to comment Share on other sites More sharing options...
MaLd0n Posted May 19, 2019 Author Share Posted May 19, 2019 On 4/30/2019 at 5:20 PM, lowlevel said: Hi, MaLd0n can you help an edit this for me. OWN U BEER & BTHNX ProductName : Mac OS X ProductVersion: 10.11.6 BuildVersion: 15G31 Bootargs : nv_disable=1 Kernel : Darwin Kernel Version 15.6.0: Thu Jun 23 18:25:34 PDT 2016 Model ID : iMac10,1 KernelMode: x86_64 CPU TYPE : Intel(R) Core(TM)2 Quad CPU @ 2.93GHz CPU ID : Ox6F7 (1783) Cores : 4 Cores, 4 Threads @ 3006MHz Bus: 333MHz FSB: 1332MHz Caches : L1i:32Kb L1d:32Kb L2:4096Kb L3:0Kb CPU Features : FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM PBE SSE3 DTES64 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM SYSCALL XD EM64T LAHF Send me iMac-Nickolas.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
dtofke Posted August 7, 2019 Share Posted August 7, 2019 (edited) Hello MaLd0n can you do an edit for me please ? My specs: Asus P5K Quad-Core Intel Xeon 9550 ATI Radeon HD5450 for the moment but i will have Asus gt710 soon I have installed mojave, it boots in usb but not in sata (sata is not reconized by mojave) but it's ok in sierra Can you check if my config plist is ok (attached) And do i put same kexts in mojave i have put in sierra ? Thanks for all ! dtofke Send me Christophes-iMac.zip config.plist Edited August 7, 2019 by dtofke Link to comment Share on other sites More sharing options...
MaLd0n Posted August 7, 2019 Author Share Posted August 7, 2019 4 hours ago, dtofke said: Hello MaLd0n can you do an edit for me please ? My specs: Asus P5K Quad-Core Intel Xeon 9550 ATI Radeon HD5450 for the moment but i will have Asus gt710 soon I have installed mojave, it boots in usb but not in sata (sata is not reconized by mojave) but it's ok in sierra Can you check if my config plist is ok (attached) And do i put same kexts in mojave i have put in sierra ? Thanks for all ! dtofke Send me Christophes-iMac.zip config.plist i think u need a sata driver, some hardware loose support in mojave Link to comment Share on other sites More sharing options...
once Posted September 22, 2019 Share Posted September 22, 2019 On 7/16/2018 at 11:11 PM, Alpha22 said: Hi MaLd0n, Could you help me edit my DSDT Once-Send me iMac.rar Link to comment Share on other sites More sharing options...
Dicky_MF Posted November 8, 2019 Share Posted November 8, 2019 (edited) I'm trying to install Catalina, but the Disk Utility is show nothing except my USB Stick Installer (No SATA Drive/Hard Disk) LGA775 C2D E8500 Nvidia GT710 (Kepler) CLOVER copy.zip Edited November 8, 2019 by Dicky_MF Link to comment Share on other sites More sharing options...
Zhivodar Ivanov Posted November 29, 2019 Share Posted November 29, 2019 Hi MaLd0n, do you help me for dsdt for my 775 PC. Greetings! Send me Zhivodars-iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted November 30, 2019 Author Share Posted November 30, 2019 5 hours ago, Zhivodar Ivanov said: Hi MaLd0n, do you help me for dsdt for my 775 PC. Greetings! Send me Zhivodars-iMac.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
Zhivodar Ivanov Posted December 2, 2019 Share Posted December 2, 2019 Hi Mald0n, tested dsdt but machine freeze after while in verbose mode with Prohibition Icon. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 7, 2020 Author Share Posted February 7, 2020 On 9/22/2019 at 4:19 AM, once said: Once-Send me iMac.rar DSDT.aml.zip Link to comment Share on other sites More sharing options...
tripboy808 Posted February 26, 2020 Share Posted February 26, 2020 (edited) Hello. I can't start speedstep on xeon e5440. What you need to do to do this? Edited February 26, 2020 by tripboy808 Link to comment Share on other sites More sharing options...
Rodion2010 Posted February 26, 2020 Share Posted February 26, 2020 (edited) 10 hours ago, tripboy808 said: Hello. I can't start speedstep on xeon e5440. What you need to do to do this? in general generate C/P States in Clover for more detailed answer show clover log Edited February 26, 2020 by Rodion2010 Link to comment Share on other sites More sharing options...
andyapple Posted March 8, 2020 Share Posted March 8, 2020 (edited) Hello, I've installed successfully macOS Catalina on ASUS P5K motherboard. Intel Q9400 LGA775 - Motherboard Asus P5K with modded Bios to enable AHCI - GTX 650 supported by Catalina - ALC 883 audio - Atheros Attansic L1 Ethernet works with kext (AttansicL1Ethernet.kext). I have also replace com.apple.telemetry with the old one to make catalina boot. I need help to fix Audio ALC 883 and sleep, because it goes to sleep but when it wakes up it is dark screen. I tried to use your efi folder for lga775 but it won't work and gives me many error as in pic I've attatched the efi folder I use to boot. I have to fix only audio and sleep. I still don't have any dsdt in the efi i use to boot and i get error when i change smbios from macbook to imac. Please help me. I am able to boot only with fakesmc and the kext for ethernet is AttansicL1Ethernet.kext which works but i don't understand if sometimes need inject kext or kext-dev-mode=1 and what's the difference. Thank you, Andyapple Edited March 8, 2020 by andyapple Link to comment Share on other sites More sharing options...
andyapple Posted March 8, 2020 Share Posted March 8, 2020 (edited) 6 hours ago, andyapple said: Hello, I've installed successfully macOS Catalina on ASUS P5K motherboard. Intel Q9400 LGA775 - Motherboard Asus P5K with modded Bios to enable AHCI - GTX 650 supported by Catalina - ALC 883 audio - Atheros Attansic L1 Ethernet works with kext (AttansicL1Ethernet.kext). I have also replace com.apple.telemetry with the old one to make catalina boot. I need help to fix Audio ALC 883 and sleep, because it goes to sleep but when it wakes up it is dark screen. I tried to use your efi folder for lga775 but it won't work and gives me many error as in pic I've attatched the efi folder I use to boot. I have to fix only audio and sleep. I still don't have any dsdt in the efi i use to boot and i get error when i change smbios from macbook to imac. Please help me. I am able to boot only with fakesmc and the kext for ethernet is AttansicL1Ethernet.kext which works but i don't understand if sometimes need inject kext or kext-dev-mode=1 and what's the difference. Thank you, Andyapple Ok guys i solved audio and sleep now works too. No dsdt. Simply add AppleALC.kext to kexts in clover efi and layout 7 in plist. The only problem left is with AttansicL1Ethernet.kext. Sometimes it works great and sometime it is really unstable. Is it compatible with catalina? thank you, andyapple EFI.zip Edited March 8, 2020 by andyapple Link to comment Share on other sites More sharing options...
MaLd0n Posted March 8, 2020 Author Share Posted March 8, 2020 12 minutes ago, andyapple said: Is it compatible with catalina? i need a full dump https://www.olarila.com/files/Utils/RunMe.app.ziphttps://www.youtube.com/watch?v=k9wmIfGLe3A Link to comment Share on other sites More sharing options...
andyapple Posted March 8, 2020 Share Posted March 8, 2020 I did many tries and i finally fixed it! Thank you! Fully working Used kext FakeSMC, AttansicL1Ethernet , AppleALC and Lilu. Thank you, andyapple! Link to comment Share on other sites More sharing options...
Recommended Posts