MaLd0n Posted August 23, 2018 Author Share Posted August 23, 2018 1 hour ago, NeXtor said: Send me Fabrizios-iMac.zip check if work, now u can use usbinjectall if u can DSDT.aml.zip 48 minutes ago, Stefanalmare said: Hi MaLd0n! I'm a noob in hackintosh. I just make my ProBook 4540s to run high Sierra and that is all. I have an old and nice piece of hardware dc7800 and I'd like to install high Sierra on it. I used your instructions and your clover but the installation hang and I'm stuck. Please give me a hand. I installed also in this PC an ssd Samsung evo 250 GB. Thank you in advance! remove whatevergreen kext, use pci=0x2000 Link to comment Share on other sites More sharing options...
NeXtor Posted August 23, 2018 Share Posted August 23, 2018 9 minutes ago, MaLd0n said: check if work, now u can use usbinjectall if u can DSDT.aml.zip all usb work. now I check that everything else works properly ... thanks!! Link to comment Share on other sites More sharing options...
Stefanalmare Posted August 24, 2018 Share Posted August 24, 2018 16 hours ago, MaLd0n said: remove whatevergreen kext, use pci=0x2000 Done what you said and it's stop at the same point. I send my clover (efi partition). Maybe I do something wrong........... CLOVER.zip Link to comment Share on other sites More sharing options...
wham17wham Posted August 24, 2018 Share Posted August 24, 2018 On 4/30/2017 at 10:14 AM, MaLd0n said: Test it Mojave on your GA-P35-DS3 775 ??????? Link to comment Share on other sites More sharing options...
MaLd0n Posted August 24, 2018 Author Share Posted August 24, 2018 if u have a processor with sse4.1 u can install mojave http://dosdude1.com/mojave/ Link to comment Share on other sites More sharing options...
MaLd0n Posted August 25, 2018 Author Share Posted August 25, 2018 UPDATE FIRST POST -Folders.app Link to comment Share on other sites More sharing options...
MaLd0n Posted September 20, 2018 Author Share Posted September 20, 2018 update first post with Olarila.app Link to comment Share on other sites More sharing options...
gigahard Posted September 25, 2018 Share Posted September 25, 2018 I was using the High Sierra normally and when I went to install the Mojave stays in Bootloop, no crashes, no error pops up. It just restarts. Could you help me? Thank you. Excuse my bad English. Hehe MSI G41M-S01 Chip G41 ICH7 Intel Core 2 Quad Q9550 8GB RAM 1333 Nvidia 8400GS 1GB Link to comment Share on other sites More sharing options...
MaLd0n Posted September 25, 2018 Author Share Posted September 25, 2018 58 minutes ago, gigahard said: Nvidia 8400GS 1GB i think this problem Link to comment Share on other sites More sharing options...
cobradera Posted September 26, 2018 Share Posted September 26, 2018 Hi @MaLd0n! Hi all! I have recently upgraded to macOS Mojave on an Asus P6T Deluxe v2 and nVidia GeForce GTX 275. After the upgrade graphics and sleep no longer work, meaning that I have 2 monitors and only one of them is showing image, but the resolution is crappy and I can't change it. Also, pressing the sleep button on macOS isn't doing anything anymore. Do you have any hints or can I send you some files to help me out ? I did had some DSDT patches a while ago due to the fact that I had installed a pci bluetooth card and that was causing instant wake from sleep. However, I don't think that's the issue. Maybe my DSDT is not ok, but I need some help / guidance to apply the correct patches. Thanks in advance! Link to comment Share on other sites More sharing options...
MaLd0n Posted September 26, 2018 Author Share Posted September 26, 2018 6 hours ago, cobradera said: Hi @MaLd0n! Hi all! I have recently upgraded to macOS Mojave on an Asus P6T Deluxe v2 and nVidia GeForce GTX 275. After the upgrade graphics and sleep no longer work, meaning that I have 2 monitors and only one of them is showing image, but the resolution is crappy and I can't change it. Also, pressing the sleep button on macOS isn't doing anything anymore. Do you have any hints or can I send you some files to help me out ? I did had some DSDT patches a while ago due to the fact that I had installed a pci bluetooth card and that was causing instant wake from sleep. However, I don't think that's the issue. Maybe my DSDT is not ok, but I need some help / guidance to apply the correct patches. Thanks in advance! ur gpu work in mojave? post files here RunMe.app Link to comment Share on other sites More sharing options...
cobradera Posted September 26, 2018 Share Posted September 26, 2018 6 hours ago, MaLd0n said: ur gpu work in mojave? post files here RunMe.app Hi! I have 1 of 2 screens showing image, but the display is not recognized and the resolution is 1280x1024 instead of 1920x1080. It was ok on High Sierra. What I did now, just like on high sierra, I manually deleted NVDAStartup.kext from /System/Library/Extensions as it was causing a kernel panic. Please find attached the files. Send me HiMac.liviana.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted September 26, 2018 Author Share Posted September 26, 2018 37 minutes ago, cobradera said: Hi! I have 1 of 2 screens showing image, but the display is not recognized and the resolution is 1280x1024 instead of 1920x1080. It was ok on High Sierra. What I did now, just like on high sierra, I manually deleted NVDAStartup.kext from /System/Library/Extensions as it was causing a kernel panic. Please find attached the files. Send me HiMac.liviana.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
cobradera Posted September 27, 2018 Share Posted September 27, 2018 7 hours ago, MaLd0n said: DSDT.aml.zip Still 1 of 2 monitors work. Either DVI or HDMI output. Not both at the same time. And the resolution is at 1920x1080. What should I try next? Thanks for the DSDT. Can you tell me if there was something not ok in it? Link to comment Share on other sites More sharing options...
MaLd0n Posted September 27, 2018 Author Share Posted September 27, 2018 8 hours ago, cobradera said: Still 1 of 2 monitors work. Either DVI or HDMI output. Not both at the same time. And the resolution is at 1920x1080. What should I try next? Thanks for the DSDT. Can you tell me if there was something not ok in it? video, use clover for solve it Link to comment Share on other sites More sharing options...
mickeyd453 Posted September 27, 2018 Share Posted September 27, 2018 I found this thread while searching for a problem with my Gigabyte p55 LGA motherboard and Mojave. This board has run fine up until this point with HS 10.13 and everything before hand. I upgraded to Mojave and the installer ran fine, on reboot however after some time of seemingly booting OK the machine just rebooted. Booting into verbose mode from clover its hard to see where it actually reboots as it scrolls past too quickly and then just reboots. Are there any tips that may indicate why 10.13 is fine but 10.14 seemingly installs fine but then reboots on boot? Link to comment Share on other sites More sharing options...
cobradera Posted September 27, 2018 Share Posted September 27, 2018 3 hours ago, MaLd0n said: video, use clover for solve it You mean I should change something in Clover for Video ? Didn't really understood what you meant exactly. Thanks! Link to comment Share on other sites More sharing options...
MaLd0n Posted September 28, 2018 Author Share Posted September 28, 2018 InjectNvidia u need check if ur gpu have support Link to comment Share on other sites More sharing options...
cobradera Posted September 28, 2018 Share Posted September 28, 2018 5 hours ago, MaLd0n said: InjectNvidia u need check if ur gpu have support I tried with InjectNvidia On and no change. Also InjectNvidia Off is the same like On. Thanks for your suggestions. Maybe I revert to high sierra. Link to comment Share on other sites More sharing options...
cobradera Posted September 28, 2018 Share Posted September 28, 2018 13 hours ago, cobradera said: I tried with InjectNvidia On and no change. Also InjectNvidia Off is the same like On. Thanks for your suggestions. Maybe I revert to high sierra. As a follow-up on this: I used the previous DSDT.aml, as the one I downloaded would make waking from sleep not possible from USB devices. I am using temporarily an Gigabyte nVidia GT 740 2G OC and it works natively with the NVDAStartup from Mojave and with InjectNvidia = False in clover. Basically nothing is selected in clover for GPU. I am wondering what nVidia cards are natively supported without the use of web drivers? Thx! Link to comment Share on other sites More sharing options...
MaLd0n Posted September 28, 2018 Author Share Posted September 28, 2018 some nvidia gpu line 6/7 work oob Link to comment Share on other sites More sharing options...
cobradera Posted September 28, 2018 Share Posted September 28, 2018 4 minutes ago, MaLd0n said: some nvidia gpu line 6/7 work oob do you have any recommendation? or maybe a link? i am confused on gt 740 / 750 / 760 or gtx 740 / 750 / 760? Link to comment Share on other sites More sharing options...
MaLd0n Posted September 28, 2018 Author Share Posted September 28, 2018 750+ xD Link to comment Share on other sites More sharing options...
cobradera Posted September 28, 2018 Share Posted September 28, 2018 29 minutes ago, MaLd0n said: 750+ xD Looking for a GTX 760 in this case. Thanks! 1 Link to comment Share on other sites More sharing options...
StevenLongley Posted September 30, 2018 Share Posted September 30, 2018 Hello dudes. I can not start my HD 7870 at 10.13, I get only a black screen. Why? In the Russian forum, I read that this is due to socket 775, but is it true? I was able to run the video card with only kexts from 10.12, but there was only 7 MB of vram. Can I somehow run this card? Device ID 6818. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts