mactec Posted January 27, 2018 Share Posted January 27, 2018 I will give a try, hopefully soon and will report back! thank you very much anyway! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 Enjoy! Link to comment Share on other sites More sharing options...
Paps4 Posted February 1, 2018 Share Posted February 1, 2018 MaLd0n hi from sunny Greece, I've been trying to get this to work, but I get a blinking cursor right when the USB starts to load. It gets stuck there. I have an ASUS P5W64 Pro with a Intel Core 2 Duo LGA 775. I have tried both AHCI and Standard IDE, and also I tried adding the boot folders both to the root of the Install High Sierra usb stick, as well as using clover configurator with the EFI mount and pasting your Clover folder there. Still no go. Any ideas? Always with regards, Nikos 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 1, 2018 Author Share Posted February 1, 2018 MaLd0n hi from sunny Greece, I've been trying to get this to work, but I get a blinking cursor right when the USB starts to load. It gets stuck there. I have an ASUS P5W64 Pro with a Intel Core 2 Duo LGA 775. I have tried both AHCI and Standard IDE, and also I tried adding the boot folders both to the root of the Install High Sierra usb stick, as well as using clover configurator with the EFI mount and pasting your Clover folder there. Still no go. Any ideas? Always with regards, Nikos what ur core2duo? Link to comment Share on other sites More sharing options...
Paps4 Posted February 1, 2018 Share Posted February 1, 2018 The 6600 2.4 GHz 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 1, 2018 Author Share Posted February 1, 2018 is a quad core Q6600, dont have sse4.1 instruction, u need use El Capitan Link to comment Share on other sites More sharing options...
RobertX Posted February 2, 2018 Share Posted February 2, 2018 hello again MaLdOn....all seems well here now, except shutdown/restart....sleep is now working...appears to be be true sleep com.apple.message.domain: com.apple.sleepwake.type com.apple.message.signature: Normal Sleep com.apple.message.signature2: Software Sleep com.apple.message.signature3: UserActivity Assertion com.apple.message.signature4: UserActivity Assertion com.apple.message.result: pass com.apple.message.summarize: YES ... computer goes into standby mode...wake up with power button, or two USB mouse clicks....is there any fix possible for shutdown/restart? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 2, 2018 Author Share Posted February 2, 2018 hello again MaLdOn....all seems well here now, except shutdown/restart....sleep is now working...appears to be be true sleep com.apple.message.domain: com.apple.sleepwake.type com.apple.message.signature: Normal Sleep com.apple.message.signature2: Software Sleep com.apple.message.signature3: UserActivity Assertion com.apple.message.signature4: UserActivity Assertion com.apple.message.result: pass com.apple.message.summarize: YES ... computer goes into standby mode...wake up with power button, or two USB mouse clicks....is there any fix possible for shutdown/restart? DSDT 1 Link to comment Share on other sites More sharing options...
doom3crazy Posted February 4, 2018 Share Posted February 4, 2018 Okay maldon, just to be safe I figured I would post all the things again. The file Sean's 775 iMac is the I/O Reg. And the file Send me Sean's 775 iMac is the Run me file. Also attached is my clover folder. Motherboard: Maximus Formula II Cpu: Xeon x5470 GPU: Geforce 8400 GS Sean’s 775 iMac.zip Send me Sean’s 775 iMac.zip CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 4, 2018 Author Share Posted February 4, 2018 Okay maldon, just to be safe I figured I would post all the things again. The file Sean's 775 iMac is the I/O Reg. And the file Send me Sean's 775 iMac is the Run me file. Also attached is my clover folder. Motherboard: Maximus Formula II Cpu: Xeon x5470 GPU: Geforce 8400 GS run it and send me file(test for me) RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
doom3crazy Posted February 5, 2018 Share Posted February 5, 2018 run it and send me file(test for me) RunMe.app.zip okay I think it did this right. At the end of the script that runs it goes to close I/O reg and asks me if I want to save, do I save changes? I clicked don't save. Send me Seans-iMac.domain.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2018 Author Share Posted February 5, 2018 okay I think it did this right. At the end of the script that runs it goes to close I/O reg and asks me if I want to save, do I save changes? I clicked don't save. ioreg looks good I/O reg and asks me if I want to save, do I save changes? I clicked don't save. thx, i'll check it 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2018 Author Share Posted February 5, 2018 Update First Post new Run_me.app Link to comment Share on other sites More sharing options...
doom3crazy Posted February 5, 2018 Share Posted February 5, 2018 I am having a little bit of a weird problem. I noticed that videos on facebook wont play. Any idea what the issue might be? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2018 Author Share Posted February 5, 2018 I am having a little bit of a weird problem. I noticed that videos on facebook wont play. Any idea what the issue might be? youtube, etc is ok? 1 Link to comment Share on other sites More sharing options...
doom3crazy Posted February 5, 2018 Share Posted February 5, 2018 youtube, etc is ok? Yeah that was the first thing I checked. Youtube works fine but for whatever reason facebook videos on my feed and whatnot wont play. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2018 Author Share Posted February 5, 2018 Yeah that was the first thing I checked. Youtube works fine but for whatever reason facebook videos on my feed and whatnot wont play. check it, idk 1 Link to comment Share on other sites More sharing options...
Asteroids Posted February 5, 2018 Share Posted February 5, 2018 Hi MaLd0n, You helped me with an earlier revision of a Gigabyte mobo, a few months ago. Working pretty well! Now I'd like to get my slightly newer system (same motherboard model, one revision newer) up and running on Sierra. Hardware details: EP45-UD3P v1.6 Motherboard (the one we did a few months back was v1.1) Q9400 CPU 12GB of RAM "9800 GTX+" GPU Additional BCM94331CD Airport Extreme card in a PCI-E adapter for WiFi/Handoff/Continuity Had trouble getting to the Clover screen when using the 'Standard' Clover Install. So I tried a couple of options, until I could get to the Clover menu (any tips on which Options to check in the Clover Installer would help remove potential problems). Then I installed Sierra per your instructions, but Sierra would not quite boot. So I removed a few non-essential kexts/drivers and updated Lilu.kext and then it booted fine. Ran the utils, and here we are! If you can help with the DSDT that would be great! And any pointer to the 'best options' for the newer version (current) of Clover Installer would be helpful. Thanks! ACPI_origin_folder_from_Asteroids’s_Mac_Pro_EP45-UD3P_v1.6.zip Asteroids’s_Mac_Pro_EP45-UD3P_v1.6.zip Send me_Asteroids’s_Mac_Pro_EP45-UD3P_v1.6.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2018 Author Share Posted February 5, 2018 Hi MaLd0n, You helped me with an earlier revision of a Gigabyte mobo, a few months ago. Working pretty well! Now I'd like to get my slightly newer system (same motherboard model, one revision newer) up and running on Sierra. Hardware details: EP45-UD3P v1.6 Motherboard (the one we did a few months back was v1.1) Q9400 CPU 12GB of RAM "9800 GTX+" GPU Additional BCM94331CD Airport Extreme card in a PCI-E adapter for WiFi/Handoff/Continuity Had trouble getting to the Clover screen when using the 'Standard' Clover Install. So I tried a couple of options, until I could get to the Clover menu (any tips on which Options to check in the Clover Installer would help remove potential problems). Then I installed Sierra per your instructions, but Sierra would not quite boot. So I removed a few non-essential kexts/drivers and updated Lilu.kext and then it booted fine. Ran the utils, and here we are! If you can help with the DSDT that would be great! And any pointer to the 'best options' for the newer version (current) of Clover Installer would be helpful. Thanks! Send me new ioreg after reboot DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
Asteroids Posted February 6, 2018 Share Posted February 6, 2018 Okay, installed into EFI-->CLOVER-->ACPI-->patched. Re-booted. Here is the new IOReg file. Booted quickly, Shutdown (apparantly properly). It slept, but when I pushed the Power Button to wake, it tried for ~30 to 40 seconds, then re-booted. I could wake it with USB keyboard. Otherwise, most things looked pretty good (after some fairly quick testing). I'll give the Logs a look. Thanks again, let me know what you see. Asteroids’s_Mac_Pro_EP45-UD3P_v1.6__After_First_DSDT_Installed.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 6, 2018 Author Share Posted February 6, 2018 Okay, installed into EFI-->CLOVER-->ACPI-->patched. Re-booted. Here is the new IOReg file. Booted quickly, Shutdown (apparantly properly). It slept, but when I pushed the Power Button to wake, it tried for ~30 to 40 seconds, then re-booted. I could wake it with USB keyboard. Otherwise, most things looked pretty good (after some fairly quick testing). I'll give the Logs a look. Thanks again, let me know what you see. looks goos test usb ports, run geekbench... Link to comment Share on other sites More sharing options...
oSxFr33k Posted February 6, 2018 Share Posted February 6, 2018 Everything working great here. DSDT from your DSDT Library I kept from a long time ago. Both Gigabyte EP45-UD3P and Asus Maximus Formula Bios conversion to Rampage Formula X38 chipset. Only one snag when I shutdown fans still turn, everything before Sierra was fine. I just installed 10.13.3 and both running EVGA GT210 GFX cards. Shutdown fix already built into DSDT. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 6, 2018 Author Share Posted February 6, 2018 send me files 1 Link to comment Share on other sites More sharing options...
oSxFr33k Posted February 6, 2018 Share Posted February 6, 2018 send me files I can send EFI, ioreg and logs to you later tonight I packed it away ready to go to work now. I will also make sure to run command at clover boot to extract ACPI into EFI. Do you still have that script I can run to get all the files you need, I think Rehabman has one I'll look. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 6, 2018 Author Share Posted February 6, 2018 I can send EFI, ioreg and logs to you later tonight I packed it away ready to go to work now. I will also make sure to run command at clover boot to extract ACPI into EFI. run it,w ait finish and send me RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts