doom3crazy Posted January 21, 2018 Share Posted January 21, 2018 try CLOVER.zip Okay so I replaced the clover folder and that worked! I reinstalled Sierra. When it rebooted it didnt boot right into OS and so I had to f8 to select USB and then when clover loaded up select the sierra install and boot into the os but that worked. I set everything up and now I am just sitting at the home screen. I know in the guide, you have a post install clover folder you;re suppose to replace. Should I use the one from the front page on this guide? Or do I re-use the one you just gave me but replace it within the OS? (Not the thumb drive) Link to comment Share on other sites More sharing options...
MaLd0n Posted January 21, 2018 Author Share Posted January 21, 2018 install clover in hdd/ssd with options http://www.insanelymac.com/forum/uploads/monthly_01_2018/post-557433-0-52456300-1516514784.png http://www.insanelymac.com/forum/uploads/monthly_01_2018/post-557433-0-51139500-1516514796.png replace Clover folder http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_rel_module=post&attach_id=284345 send me tables, run it RunMe.app.zip and ioreg IORegistryExplorer.app.zip 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 21, 2018 Share Posted January 21, 2018 install clover in hdd/ssd with options http://www.insanelymac.com/forum/uploads/monthly_01_2018/post-557433-0-52456300-1516514784.png http://www.insanelymac.com/forum/uploads/monthly_01_2018/post-557433-0-51139500-1516514796.png replace Clover folder http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_rel_module=post&attach_id=284345 send me tables, run it RunMe.app.zip and ioreg IORegistryExplorer.app.zip Okay I did all that. Now on the clover boot screen I clicked f4 and nothing happen. How do I actually extract? Do I need to run the RunMeapp or IORegexplorer? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 21, 2018 Author Share Posted January 21, 2018 Okay I did all that. Now on the clover boot screen I clicked f4 and nothing happen. How do I actually extract? Do I need to run the RunMeapp or IORegexplorer? use it for extract, files generated in ur desktop RunMe.app.zip with f4, files generated in Clover/Acpi/origin 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 use it for extract, files generated in ur desktop RunMe.app.zip with f4, files generated in Clover/Acpi/origin Okay I think I did this right haha. Send me Sean’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 Okay I think I did this right haha. replace full folder CLOVER.zip reboot extract one ioreg with .app IORegistryExplorer.app.zip Open .app, go to File, Save as 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 replace full folder CLOVER.zip reboot extract one ioreg with .app IORegistryExplorer.app.zip Open .app, go to File, Save as Okay and just double checking. I have an EFI/Clover folder on my Sierra Install drive but then I also have the EFI partition itself on the drive that I have to mount to access. Do I post that clover folder in both? Or just one of them? Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 Use only EFI/Clover, u need mount partition 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 Use only EFI/Clover, u need mount partition Okay so I replaced the full folder. Then I rebooted. I now ran the IO registry explorer and clicked save as, it named it Sean's Imac. And then now when I try to upload it here it says I cannot upload this kind of file. Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 use it http://www.zippyshare.com/ 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 use it http://www.zippyshare.com/ Okay here it is. Just in case you didn't already know here is my hardware http://www62.zippyshare.com/v/uB79LKXo/file.html Asus Maximus Formula II Xeon X5470 16gb ddr2 800 Super talent Geforce 8400 GS Also, I just wanted to thank you for time and patience through all of this and helping me out. It means a lot. I am new to this but I am loving learning everything and appreciate you for teaching it! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 Okay here it is. Just in case you didn't already know here is my hardware http://www62.zippyshare.com/v/uB79LKXo/file.html Asus Maximus Formula II Xeon X5470 16gb ddr2 800 Super talent Geforce 8400 GS Also, I just wanted to thank you for time and patience through all of this and helping me out. It means a lot. I am new to this but I am loving learning everything and appreciate you for teaching it! replace DSDT in Clover/Acpi/Patched, reboot DSDT.full.zip the audio dont load, need check it or use voodoohda Also, I just wanted to thank you for time and patience through all of this and helping me out. It means a lot. I am new to this but I am loving learning everything and appreciate you for teaching it! np, welcome 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 replace DSDT in Clover/Acpi/Patched, reboot DSDT.full.zip the audio dont load, need check it or use voodoohda np, welcome Awesome man thank you. I think I am good on the audio side of things cause I use a usb audio interface. One thing I noticed is on the front page of this thread you have listed LAN links for Atheros, Intel, and Realtek. I looked up the spec page for the formula ii and it says this under lan "Dual Gigabit LAN, both featuring AI NET2 Support Teaming Technology" Do I just assume its intel? Or how would I go about getting the ethernet working? Also, do you have any suggestions or is there a list on the forums of good supported usb wifi dongles? Lastly, What is fakesmc and do I need it? Thanks again man 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 Awesome man thank you. I think I am good on the audio side of things cause I use a usb audio interface. One thing I noticed is on the front page of this thread you have listed LAN links for Atheros, Intel, and Realtek. I looked up the spec page for the formula ii and it says this under lan "Dual Gigabit LAN, both featuring AI NET2 Support Teaming Technology" Do I just assume its intel? Or how would I go about getting the ethernet working? Also, do you have any suggestions or is there a list on the forums of good supported usb wifi dongles? Lastly, I noticed the FakeSMC link is broken. What is fakesmc and do I need it? Thanks again man FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/ Wifi Usb http://www.tp-link.com/br/products/details/cat-11_TL-WN725N.html Lan http://www.insanelymac.com/forum/files/file/455-marvell-yukon-88e8056-1011/ 2 Link to comment Share on other sites More sharing options...
doom3crazy Posted January 22, 2018 Share Posted January 22, 2018 FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/ Wifi Usb http://www.tp-link.com/br/products/details/cat-11_TL-WN725N.html Lan http://www.insanelymac.com/forum/files/file/455-marvell-yukon-88e8056-1011/ Awesome you're the man! and what is FakeSmc? Is that something thats already on my system? Or do I need to install/run it? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 22, 2018 Author Share Posted January 22, 2018 Without FakeSmc, ur system don't boot emulate SMC 2 Link to comment Share on other sites More sharing options...
pramz Posted January 23, 2018 Share Posted January 23, 2018 Was able to install and run El Capitan a while back, but not Sierra or High Sierra 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 23, 2018 Author Share Posted January 23, 2018 Was able to install and run El Capitan a while back, but not Sierra or High Sierra what mobo, processor and GPU? 1 Link to comment Share on other sites More sharing options...
pramz Posted January 23, 2018 Share Posted January 23, 2018 I thought I had uploaded the definitions etc, but it looks like I forgot to click the attach this file button. :\ Right now I am on Yosemite and its working perfectly. I have another SSD with El Capitan and besides some audio issues it works as well. Specs: GA EP45-UD3P 8Gb of Ram GeForce 760 2GB Multiple SSDs Send me Pramod’s Mac Pro.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 23, 2018 Author Share Posted January 23, 2018 I thought I had uploaded the definitions etc, but it looks like I forgot to click the attach this file button. :\ Right now I am on Yosemite and its working perfectly. I have another SSD with El Capitan and besides some audio issues it works as well. Specs: GA EP45-UD3P 8Gb of Ram GeForce 760 2GB Multiple SSDs send me ur clover folder too what ur processor? 1 Link to comment Share on other sites More sharing options...
pramz Posted January 23, 2018 Share Posted January 23, 2018 send me ur clover folder too what ur processor? Core 2 Quad Q9550 2.83Ghz. CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 23, 2018 Author Share Posted January 23, 2018 Core 2 Quad Q9550 2.83Ghz. Sierra/High Sierra CLOVER.zip Link to comment Share on other sites More sharing options...
pramz Posted January 23, 2018 Share Posted January 23, 2018 Wow thanks! I will try this out tonight and let you know how this went along ! Sierra/High Sierra CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 23, 2018 Author Share Posted January 23, 2018 Wow thanks! I will try this out tonight and let you know how this went along ! k Link to comment Share on other sites More sharing options...
RobertX Posted January 24, 2018 Share Posted January 24, 2018 hello again MaLd0n ....also running Sierra 10.12 for the first time...but without video acceleration...nvidia in vesa mode to get to desktop...hoping a little tinkering will get things right... here are some of what you ask for..... first ioregistryexplorer Les’s iMac.zip ...and a dump from clover f4 origin.zip ...and my clover folder CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts