macKriz Posted April 5, 2019 Share Posted April 5, 2019 thats right, my other builds have different method to get things done. I choose the stable ones that fit for each machine and its purpose 2 hours ago, Donw35 said: I also created a USBMap.kext so you do not need all those other settings to get USB 3.0 speeds and updates will not require patching. oh btw, would you like to share how to build USBMaps.kext? Link to comment Share on other sites More sharing options...
dwfwd Posted April 7, 2019 Share Posted April 7, 2019 (edited) On 4/5/2019 at 4:13 PM, macKriz said: Any others than vanilla kexts goes to /L/E, the system boot looking the prelink kernel that build from /S/L/E and /L/E, so this cache contains all kernel extensions that needed to boot macOS with any hardware configuration. C/K/O not include on the system cache. Hackintool is a new utils for me too... Thanks to Donw35 and many other members on this thread that makes these old cute machines reborn. Wishing you a good weekend macKriz, Donw35 and fellow threaders. I hope to be going onwards with this very soon (aiming for next three days). Edited April 7, 2019 by dwfwd Link to comment Share on other sites More sharing options...
sest1000 Posted April 8, 2019 Share Posted April 8, 2019 On 4/5/2019 at 5:53 PM, Donw35 said: there are many ways to get this done, I don't put any kexts in L/E, only in the Clover folder, this way I don't have to deal with updates changing the system. I have a newer Clover folder that is update but the dependancies are updated BIOS to latest version and latest clover. I will update my clover file later today when I get home. I also created a USBMap.kext so you do not need all those other settings to get USB 3.0 speeds and updates will not require patching. Hello Donw35 I used your clover folder. Everything works except my internal bluetooth card that is connected to internal usb connector. If I remove your usbmap.kext and use usbinjectall my bluetooth works again. How do I change the usbmap.kext so my internal connector works? thanks for the help. Link to comment Share on other sites More sharing options...
dwfwd Posted April 8, 2019 Share Posted April 8, 2019 (edited) On 4/5/2019 at 6:04 AM, macKriz said: 1. Boot to your previous configuration that you can boot to gui. 2. then check your Clover/Kext folder, remove unnecessary kext, actualy only FakeSMC.kext and some other essential kext (e.g IntelMausiEthernet.kext) need to put on that folder. Remove others kext. 3. check /Library/Extensions folder. Only these additional kext installed on /Library/Extension folder remove all FakeSMC Sensor 4. check config.plist on Clover folder, this is my example configuration using IGPU 4600. 5. Rebuild kernel cache & Repair Permissions using KextUtility app 6. Reboot. 7. Goodluck. I've done these steps, using your EFI folder provided as the basis. No change unfortunately, not able to succesfully boot. What to try now? The furthest i've gotten with the EFI folders I included in my first post is to boot without accelerated graphics. Edited April 8, 2019 by dwfwd Link to comment Share on other sites More sharing options...
macKriz Posted April 9, 2019 Share Posted April 9, 2019 12 hours ago, dwfwd said: The furthest i've gotten with the EFI folders I included in my first post is to boot without accelerated graphics. This is a good start to begin. Usualy I re-route the process from the beginning, like recheck Bios configuration, reinstall the latest clover from original installer, check every detail clover config.plist, and finally check all necessary kexts, and dont forget repair permissions and rebuild system cache. Last step is tweaking system dsdt, ssdt, ssdt-uiac.aml or usbmap.kext for tweaking usb port injection. Link to comment Share on other sites More sharing options...
dwfwd Posted April 9, 2019 Share Posted April 9, 2019 (edited) 1 hour ago, macKriz said: This is a good start to begin. Usualy I re-route the process from the beginning, like recheck Bios configuration, reinstall the latest clover from original installer, check every detail clover config.plist, and finally check all necessary kexts, and dont forget repair permissions and rebuild system cache. Last step is tweaking system dsdt, ssdt, ssdt-uiac.aml or usbmap.kext for tweaking usb port injection. Yeah..at this point I've tried and made 80 EFI configs, and the Rehabman HD4600 and dozens of other HD4600 and i5-4570s or similar configs I've tried and edited all did not work. Not even getting a boot on either High Sierra or Mojave with most of those. Just with the 2 out of the 80 EFI folders I attached I could boot with 7mb graphics. I'm terribly confused from all the framebuffer stuff and exhausted from the whole process. I feel like I've really tried as much as I can within my understanding of it. Do you understand perhaps why your and other configs won't work on mine and get stuck? I've gone over the BIOS and Kext updates as well. Edited April 9, 2019 by dwfwd Link to comment Share on other sites More sharing options...
macKriz Posted April 9, 2019 Share Posted April 9, 2019 1 hour ago, dwfwd said: Yeah..at this point I've tried and made 80 EFI configs, and the Rehabman HD4600 and dozens of other HD4600 and i5-4570s or similar configs I've tried and edited all did not work. Not even getting a boot on either High Sierra or Mojave with most of those. Just with the 2 out of the 80 EFI folders I attached I could boot with 7mb graphics. I'm terribly confused from all the framebuffer stuff and exhausted from the whole process. I feel like I've really tried as much as I can within my understanding of it. Do you understand perhaps why your and other configs won't work on mine and get stuck? I've gone over the BIOS and Kext updates as well. Hey, I found this interesting, you may check it out...High Sierra auf HP Elite Desk 800 G1 USDT Installations- und Einrichtungsproblem Link to comment Share on other sites More sharing options...
dwfwd Posted April 9, 2019 Share Posted April 9, 2019 1 hour ago, macKriz said: Hey, I found this interesting, you may check it out...High Sierra auf HP Elite Desk 800 G1 USDT Installations- und Einrichtungsproblem You have good eyes, thank you! Checking it out. Link to comment Share on other sites More sharing options...
Donw35 Posted April 9, 2019 Author Share Posted April 9, 2019 just for giggles, I took a HDD, installed Mojave on it from a real Mac, installed Clover and dropped my Clover folder on it that I posted, it booted and all is working as expected. With that said, I am wondering if something is wrong with your base OS install. Link to comment Share on other sites More sharing options...
dwfwd Posted April 9, 2019 Share Posted April 9, 2019 (edited) 7 minutes ago, Donw35 said: just for giggles, I took a HDD, installed Mojave on it from a real Mac, installed Clover and dropped my Clover folder on it that I posted, it booted and all is working as expected. With that said, I am wondering if something is wrong with your base OS install. Hmm. I installed both High Sierra and Mojave and two disks for using with these configs. The installation wasn't done on the Elitedesk 800 G1 USDT i5-4570s but on an T430 i5-3320M. Is that something I did should not have done? I couldn't get the installer to boot on the Elitedesk. I keep thinking the specific GPU model difference sparked my problems..what do you think? Maybe I'm not looking in the right direction. Edited April 9, 2019 by dwfwd Link to comment Share on other sites More sharing options...
Donw35 Posted April 9, 2019 Author Share Posted April 9, 2019 the problems you are having are uncommon and that we have the same machine would indicate that something is going wrong during the OS install process. let's try starting fresh on the HP and make sure no other files other then the ones posted are use.. Link to comment Share on other sites More sharing options...
macKriz Posted April 15, 2019 Share Posted April 15, 2019 just got MSI Radeon Rx 460 2GT LP, needs RadeonDeInit = true on config.plist. Link to comment Share on other sites More sharing options...
dwfwd Posted April 15, 2019 Share Posted April 15, 2019 On 4/9/2019 at 5:17 PM, Donw35 said: the problems you are having are uncommon and that we have the same machine would indicate that something is going wrong during the OS install process. let's try starting fresh on the HP and make sure no other files other then the ones posted are use.. Yeah. Had to take a break. I restarted the process as you proposed and installed High Sierra with the latest EFI I have working (7mb graphics) on this machine. Tomorrow I'll try the configs that are supposed to work - including the one from your first post here. Link to comment Share on other sites More sharing options...
dwfwd Posted April 15, 2019 Share Posted April 15, 2019 (edited) On 4/9/2019 at 5:17 PM, Donw35 said: the problems you are having are uncommon and that we have the same machine would indicate that something is going wrong during the OS install process. let's try starting fresh on the HP and make sure no other files other then the ones posted are use.. Hey thanks, for your april EFI update! I just tried it on the fresh High Sierra install. Here it gets stuck at kextdstall[0], (60s): 'IGPU' then repeats 3 times, then en0: startting optimisistic DAD (cont.), followed by another kextd stall, then followed by IOConsoleUsers: time(0) 0->(0). lin0, llk1, IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0 , now 0, sm 0x0 followed by messages about ACM: verifypolicy ending with repetitition of IOConsoleUsers and last lines are hfs: mounted High Sierra USB Installer on device disk1s3 hfs: unmount initiated on High Sierra USB Installer on device disk1s3 Edit: I just saw I'm connected to VGA and have been since I succesfully installed High Sierra a few hours ago. (last times I was on displayport) No problem, continueing and updating tomorrow, trying all the configs from other users. Making mistakes now. Edited April 15, 2019 by dwfwd Link to comment Share on other sites More sharing options...
dwfwd Posted April 18, 2019 Share Posted April 18, 2019 Unfortunately doing the process while connected through Displayport, I get the same result as my previous post. Link to comment Share on other sites More sharing options...
vespa75 Posted April 18, 2019 Share Posted April 18, 2019 (edited) Hi everybody, I always have a problems with USB 3.0 ports of my Elitedesk 800 G1 using Mojave 10.14.4; I can read all USB 2.0 sticks into USB 3.0 ports but no external HDD or SSD can be detected!!! No USB 3.0 problems with WINDOWS 10 Is there any issue please? Merci d'avance ;o)) Edited April 19, 2019 by vespa75 frenchs write frenglish ;o)) Link to comment Share on other sites More sharing options...
mitch1 Posted April 21, 2019 Share Posted April 21, 2019 @Donw35 just a post to say thanks for this guide and files. my first Hackintosh attempt is working great ! 2 Link to comment Share on other sites More sharing options...
dwfwd Posted April 24, 2019 Share Posted April 24, 2019 Here's the error I get when using @Donw35's latest April config. It looks beautiful, not sure why I cannot get it to work here Link to comment Share on other sites More sharing options...
bayard0 Posted April 24, 2019 Share Posted April 24, 2019 Thanks for supplying the EFI.zip OP At first I was having a hell of a time, it wouldn't boot, then today I realized maybe my bios isnt upto date So I checked and it wasn't, I updated it and got it up n running thanks to your config. Great job. 1 Link to comment Share on other sites More sharing options...
Donw35 Posted April 24, 2019 Author Share Posted April 24, 2019 sorry guys, I forgot to mention, if you are using my config, you will need to get your own serial number, I removed it, just go into clover and make it recreate it ... also, this system only worked with display port, VGA does not work to desktop 1 Link to comment Share on other sites More sharing options...
mitch1 Posted April 30, 2019 Share Posted April 30, 2019 I have been trying to get Wake on Lan working. It seems to work ok but often goes back to sleep before my VNC client can connect (a matter of seconds) . I've been playing with Darkwake bootflags but need to do more testing. Darkwake=0 or 8 seem to keep it on longer. With no flag set as per the @Donw35 EFI It appears to be waking itself outside of WOL requests. Just realised I'm seeing no options for powernap in prefs/energy saver and reading around a few threads and trying a few things haven't been able to show the option. Is this active in others ? Link to comment Share on other sites More sharing options...
Donw35 Posted April 30, 2019 Author Share Posted April 30, 2019 do you want Wake on Ethernet enabled ?, if I have that on my will wake up to Link to comment Share on other sites More sharing options...
mitch1 Posted May 1, 2019 Share Posted May 1, 2019 Yes i'd like Wake on Ethernet on as would like to use WOL functionality. But, I only want it to wake when I tell it to via magic packet. Using darkwake=0 seems to have kept is asleep last night which is what I want. (no powernap). Need to check now I can still wake on lan as expected, but all appears good so far. Link to comment Share on other sites More sharing options...
yu2009 Posted May 5, 2019 Share Posted May 5, 2019 HP EliteDesk 800 G1 SFF 配合楼主驱动安装可行吗 Link to comment Share on other sites More sharing options...
Donw35 Posted May 5, 2019 Author Share Posted May 5, 2019 45 minutes ago, yu2009 said: HP EliteDesk 800 G1 SFF 配合楼主驱动安装可行吗 Yes, that should work Link to comment Share on other sites More sharing options...
Recommended Posts