Matgen84 Posted January 25, 2019 Share Posted January 25, 2019 2 hours ago, MaLd0n said: post a full dump I can't post full dump: darwindumper 3.0.4 crashs and reboot my system under 10.14.3 There is partial dump in attachements. Thanks. DarwinDumper_3.0.4_25.01_18.33.22_iMac13,1_AMI_X64_4862_Unknown_18D42_mathieu.zip Link to comment Share on other sites More sharing options...
ak-78 Posted January 26, 2019 Share Posted January 26, 2019 Dear Maldon this time I replaced CLOVER folder and got kernel panic as well. I tried several different args with no luck. Could't load installer. 1 Link to comment Share on other sites More sharing options...
ak-78 Posted January 26, 2019 Share Posted January 26, 2019 Dear Maldon this time I replaced CLOVER folder and got kernel panic as well. I tried several different args with no luck. Could't load installer. Link to comment Share on other sites More sharing options...
Guest Posted January 29, 2019 Share Posted January 29, 2019 (edited) Hello and thank you for this space, I just installed 10.13.6 and seems to work fine, except for the USB ports in the back and the bluetooth device (I have an IOGEAR GBU521W6 Bluetooth 4.0 USB) it was very difficult for me to patch the Nvidia drivers and the ALC audio and nothing seems to work in order to put the usb and bluetooth back to normal (I had them working on Sierra but now I cannot). I have this setup: Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz MOBO: GA-Z77X-UP4 TH GPU: NVIDIA GTX 1080ti SSD: KINGSTON SUV480GB this is my EFI file any help will be much appreciated Edited January 29, 2019 by agaliarept processor specs Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2019 Author Share Posted January 29, 2019 8 hours ago, agaliarept said: Hello and thank you for this space, I just installed 10.13.6 and seems to work fine, except for the USB ports in the back and the bluetooth device (I have an IOGEAR GBU521W6 Bluetooth 4.0 USB) it was very difficult for me to patch the Nvidia drivers and the ALC audio and nothing seems to work in order to put the usb and bluetooth back to normal (I had them working on Sierra but now I cannot). I have this setup: Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz MOBO: GA-Z77X-UP4 TH GPU: NVIDIA GTX 1080ti SSD: KINGSTON SUV480GB this is my EFI file any help will be much appreciated --Run_Me RunMe.app 1 Link to comment Share on other sites More sharing options...
Guest Posted January 29, 2019 Share Posted January 29, 2019 8 hours ago, MaLd0n said: --Run_MeRunMe.app Here it is Send me Vss-iMac.zip Link to comment Share on other sites More sharing options...
Matgen84 Posted January 30, 2019 Share Posted January 30, 2019 (edited) Hi @MaLd0n Since macOS 10.13.6 and now under macOS 10.14.3, I've got a issue with my patched DSDT both IMac 13,1 or macmini7,1 SMBIOS: Mojave restart randomly at first boot. I have to reboot several times to get a normal startup. Rebuilding don't solve the problem. On 1/25/2019 at 6:45 PM, Matgen84 said: I can't post full dump: darwindumper 3.0.4 crashs and reboot my system under 10.14.3 There is partial dump in attachements. Thanks. DarwinDumper_3.0.4_25.01_18.33.22_iMac13,1_AMI_X64_4862_Unknown_18D42_mathieu.zip Today, I use Run_Me: results in file attachement. If you've a time to take a look, I will appreciate. Thanks in advance Send me iMac-de-Mathieu.zip Edited January 30, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
beast01 Posted February 3, 2019 Share Posted February 3, 2019 Great guide, Mald0n. Everything works fine on 10.13.6 except HDMI audio. Even p-states and turbo with oc'd multiplier without adding anything extra. My PC is connected to a 2k monitor and 4k tv ( through an AVR ) and I get occasional sound cutoffs on the tv which is running cable. I guess osx is trying to play some system sounds through HDMI. A noobish problem: I still can't manage to boot without the usb drive. I installed clover post-install to both the ssd and to UEFI. I copied your folder to the ssd and the hidden EFI partition. Right now clover configurator sees 5 config files - 1 on the usb drive, 1 on the ssd and 1 on the hidden EFI. There are also 2 config-sample files. What am I doing wrong ? My system is: Asrock p67 pro3 i5-3470 GTX 1060 6gb Samsung 860 Evo 500gb Archer T4U AC1300 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 4, 2019 Author Share Posted February 4, 2019 On 1/29/2019 at 6:32 PM, agaliarept said: Here it is Send me Vss-iMac.zip CLOVER.zip Generate one SSDT for PM https://olarila.com/files/Utils/SSDT_Automator.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted February 4, 2019 Author Share Posted February 4, 2019 On 1/30/2019 at 3:30 AM, Matgen84 said: Hi @MaLd0n Since macOS 10.13.6 and now under macOS 10.14.3, I've got a issue with my patched DSDT both IMac 13,1 or macmini7,1 SMBIOS: Mojave restart randomly at first boot. I have to reboot several times to get a normal startup. Rebuilding don't solve the problem. Today, I use Run_Me: results in file attachement. If you've a time to take a look, I will appreciate. Thanks in advance Send me iMac-de-Mathieu.zip use only it CLOVER.zip generate one SSDT for PM https://olarila.com/files/Utils/SSDT_Automator.zip 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted February 4, 2019 Share Posted February 4, 2019 (edited) 4 hours ago, MaLd0n said: use only it CLOVER.zip generate one SSDT for PM https://olarila.com/files/Utils/SSDT_Automator.zip Thanks a lot In Clover/ACPI/Patched/SSDT for USB isn't necessary despite USBInjectAll Readme by RehabMan, Right? Generate one SSDT for PM means PowerManagement, right? SSDT Automator shows only for CPU. I don't understand. Give me some explanations, please. Edited February 4, 2019 by Matgen84 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 4, 2019 Author Share Posted February 4, 2019 4 hours ago, Matgen84 said: Thanks a lot In Clover/ACPI/Patched/SSDT for USB isn't necessary despite USBInjectAll Readme by RehabMan, Right? Generate one SSDT for PM means PowerManagement, right? SSDT Automator shows only for CPU. I don't understand. Give me some explanations, please. in Mojave USB fix is mandatory 1 1 Link to comment Share on other sites More sharing options...
moonbase70 Posted February 4, 2019 Share Posted February 4, 2019 (edited) Hi MaLd0n, In attached my "send me" file My main problem is the USB 3.0 that is not working ... the mobo have 6 USB 3.0 on the back , and the case (fractal design Define R6) two USB 2.0 and two USB 3.0 on the front panel My hardware is following : MOBO Gigabyte GA-Z87X-UD7-TH CPU INTEL CORE I7 4790K GPU GIGABYTE GTX 760 4 GB RAM KINGSTON HYPERX SAVAGE DDR3 2400 MHZ Thank you in advance Fabio Send me Mac-Pro.fritz.box.zip Edited February 4, 2019 by moonbase70 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 5, 2019 Author Share Posted February 5, 2019 3 hours ago, moonbase70 said: Hi MaLd0n, In attached my "send me" file My main problem is the USB 3.0 that is not working ... the mobo have 6 USB 3.0 on the back , and the case (fractal design Define R6) two USB 2.0 and two USB 3.0 on the front panel My hardware is following : MOBO Gigabyte GA-Z87X-UD7-TH CPU INTEL CORE I7 4790K GPU GIGABYTE GTX 760 4 GB RAM KINGSTON HYPERX SAVAGE DDR3 2400 MHZ Thank you in advance Fabio Send me Mac-Pro.fritz.box.zip DSDT.aml.zip usb check here --USB Fixhttps://olarila.com/forum/viewtopic.php?p=65287#p65287 Link to comment Share on other sites More sharing options...
moonbase70 Posted February 5, 2019 Share Posted February 5, 2019 7 hours ago, MaLd0n said: DSDT.aml.zip usb check here --USB Fixhttps://olarila.com/forum/viewtopic.php?p=65287#p65287 Hi MaLd0n, Thank You for the DSDT !! Can you explain me step by step how to install the DSDT on my hackintosh (i'm a beginner on DSDT SSDT) ? I place the file on EFI/CLOVER/ACPI/PATCHED but i don't know if i must make any other settings Plaease let me know Thank you Link to comment Share on other sites More sharing options...
corbiz Posted February 7, 2019 Share Posted February 7, 2019 hi mlad0n how to enable alc221 audio on hp 600 g1 pc high sierramy speci5 46704gb ramgt1030 2gb gpuSent from my SM-A520F using Tapatalkhi mlad0n how to enable alc221 audio on hp 600 g1 pc high sierramy speci5 46704gb ramgt1030 2gb gpuSent from my SM-A520F using Tapatalk Link to comment Share on other sites More sharing options...
Matgen84 Posted February 9, 2019 Share Posted February 9, 2019 On 2/4/2019 at 3:09 AM, MaLd0n said: use only it CLOVER.zip generate one SSDT for PM https://olarila.com/files/Utils/SSDT_Automator.zip Hi @MaLd0n Do you know HotPlug patch for internal harddrive Intel7series chipset on 10.14.+. Please. Thanks in advance Link to comment Share on other sites More sharing options...
MaLd0n Posted February 9, 2019 Author Share Posted February 9, 2019 10 hours ago, Matgen84 said: Hi @MaLd0n Do you know HotPlug patch for internal harddrive Intel7series chipset on 10.14.+. Please. Thanks in advance no idea, u try a old patch? Link to comment Share on other sites More sharing options...
Matgen84 Posted February 10, 2019 Share Posted February 10, 2019 10 hours ago, MaLd0n said: no idea, u try a old patch? Thanks. I try a old patch this morning, it's seems to work. Link to comment Share on other sites More sharing options...
rio_suck Posted February 12, 2019 Share Posted February 12, 2019 Hey @MaLd0n kinda need your assistance again here.. I'm trying to install 10.13.6 on my ADATA SX8200 Pro M.2. Everything when smooth, OSX installer detected the drive. But when restart, clover can't detect the drive and only shows the USB Installer. What's the problem? Here's my IOReg Send me Hilmans-iMac.zip Link to comment Share on other sites More sharing options...
palia95 Posted February 19, 2019 Share Posted February 19, 2019 Hi, thank you for your amazing work. I've just upgraded my Hackintosh from 10.11.6 to 10.14.3 Mojave, all works fine but i've some random freeze of the system (maybe due to Intel GPU acceleration? I've read many things online...) and i can't find a solution. Check the screen. Also, some USB aren't recognized at bootup, so i'can't use keyBoard and mouse on USB 3.0 port on the back of the mobo. On El Capitan OS All worked fine, except of the GPU Rx 580, which I just bought last week. Before I use an old HD 7870. Windows run fine, so no hardware problems. Specs: Intel Core i5 3570K @4.2GHz Asrock Z77 Extreme 4 mobo 24GB of DDR3 1866MHz RAM Intel SSD Radeon Rx 580 8GB GPU 3440x1440p 34" 21:9 Monitor This is my DSDT patch: SSDT.aml And here the file obtained after RunMe App: Send me iMacdiEmanuele.fritz.box.zip Thanks in advance! Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2019 Author Share Posted February 19, 2019 On 2/12/2019 at 5:59 AM, rio_suck said: Hey @MaLd0n kinda need your assistance again here.. I'm trying to install 10.13.6 on my ADATA SX8200 Pro M.2. Everything when smooth, OSX installer detected the drive. But when restart, clover can't detect the drive and only shows the USB Installer. What's the problem? Here's my IOReg Send me Hilmans-iMac.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2019 Author Share Posted February 19, 2019 1 hour ago, palia95 said: Hi, thank you for your amazing work. I've just upgraded my Hackintosh from 10.11.6 to 10.14.3 Mojave, all works fine but i've some random freeze of the system (maybe due to Intel GPU acceleration? I've read many things online...) and i can't find a solution. Check the screen. Also, some USB aren't recognized at bootup, so i'can't use keyBoard and mouse on USB 3.0 port on the back of the mobo. On El Capitan OS All worked fine, except of the GPU Rx 580, which I just bought last week. Before I use an old HD 7870. Windows run fine, so no hardware problems. Specs: Intel Core i5 3570K @4.2GHz Asrock Z77 Extreme 4 mobo 24GB of DDR3 1866MHz RAM Intel SSD Radeon Rx 580 8GB GPU 3440x1440p 34" 21:9 Monitor This is my DSDT patch: SSDT.aml And here the file obtained after RunMe App: Send me iMacdiEmanuele.fritz.box.zip Thanks in advance! CLOVER.zip infos https://olarila.com/forum/viewtopic.php?f=62&t=7164 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2019 Author Share Posted February 19, 2019 17 hours ago, Armaniboy said: Hi @MaLd0n, Im kinda new to patching and stuff. Could u help me with DSDT patching? And getting the devices in System Report? Much appreciated, Friendly Regards. Send me Armandos-iMac-Pro.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
palia95 Posted February 19, 2019 Share Posted February 19, 2019 2 hours ago, MaLd0n said: CLOVER.zip infos https://olarila.com/forum/viewtopic.php?f=62&t=7164 Ok, i'll try, thank you very much! Link to comment Share on other sites More sharing options...
Recommended Posts