MaLd0n Posted February 24, 2018 Author Share Posted February 24, 2018 Thanks a lot for your files. So I did a test, and unfortunately then, there is no onboard USB at all, i.e. all USB2 ports - basically the ones running via the X79 chipset - are completely dead. The USB3 ports provided by my FL1100 based PCI card (I also disabled the onboard ASM1042 controller) still work, so I could at least login and make a fresh ioReg based on your config. The wake problem unfortunately also persists, showing exactly the same symptoms as with my config. What I also noticed that in iStat Menus I have (almost) no sensor readings anymore now, but I guess this is simply due to missing FakeSMC sensor plugins and maybe not really relevant for my wake problem. I attached the new ioReg and the updated clover folder as well (which is basically what you posted, plus a fresh CPU-PM SSDT) Yes, I am using X86 Platform, thats what I always did. Think this should be the right way with my 4930K, correct? CLOVER.zip new ioreg after reboot 1 Link to comment Share on other sites More sharing options...
frankiee Posted February 24, 2018 Share Posted February 24, 2018 After trying with your latest clover setup, USB2 seems to be working again, but wake still does not. I also noticed that after a failed wake, not only the POST status display on my mobo is "going crazy", also various other LEDs on the mobo start flickering / blinking, turning my mobo into a kind of lightshow. I never ever have seen something like this before ... and it seems macOS is not even aware of the wake ... nothing can be found in the logs at least. Anyways, here is an updated ioReg based on your latest config. Thanks for your help! silverstar.ioreg 2.7z 1 Link to comment Share on other sites More sharing options...
vinpo Posted February 24, 2018 Share Posted February 24, 2018 Hi everybody, for various reasons I downgraded to Sierra 10.12.6 (16G1212), almost everything seems to be ok, except strange glitches in login screen and USB HDD (USB stick are ok). Hope you can help me CLOVER.zip iMac di User.zip Send me iMac-di-User.station.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 24, 2018 Author Share Posted February 24, 2018 After trying with your latest clover setup, USB2 seems to be working again, but wake still does not. I also noticed that after a failed wake, not only the POST status display on my mobo is "going crazy", also various other LEDs on the mobo start flickering / blinking, turning my mobo into a kind of lightshow. I never ever have seen something like this before ... and it seems macOS is not even aware of the wake ... nothing can be found in the logs at least. Anyways, here is an updated ioReg based on your latest config. Thanks for your help! send me full files, i'll check logs RunMe.app.zip Hi everybody, for various reasons I downgraded to Sierra 10.12.6 (16G1212), almost everything seems to be ok, except strange glitches in login screen and USB HDD (USB stick are ok). Hope you can help me go to library/caches and delete com.apple.desktop.admin.png, reboot 3 Link to comment Share on other sites More sharing options...
vinpo Posted February 24, 2018 Share Posted February 24, 2018 go to library/caches and delete com.apple.desktop.admin.png, reboot Thank you MaLdOn, in fact the login screen now is ok. How can I fix the the USB HDD that won't go? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 24, 2018 Author Share Posted February 24, 2018 i don't remember what ur hardware, without sig.... 1 Link to comment Share on other sites More sharing options...
vinpo Posted February 24, 2018 Share Posted February 24, 2018 i don't remember what ur hardware, without sig.... Excuse me, Asus Z170A, i7 6700K, EVGA 1070 1 Link to comment Share on other sites More sharing options...
frankiee Posted February 24, 2018 Share Posted February 24, 2018 OK, here is the result of runme.zip I noticed that your tool dumped the Clover Folder of my startup volume, not the USB stick where it actually run from, so I corrected that and repacked the folder. Shortly before I ran this app, I did another failed sleep attempt, maybe this helps with debugging. And here is the output of such a failed attempt by pmset -g log Sleep/Wakes since boot at 2018-02-24 17:44:54 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: (null) 2018-02-24 18:16:13 +0100 Start powerd process is started 2018-02-24 18:16:13 +0100 Assertions Summary- [System: No Assertions] Using AC 2018-02-24 18:16:16 +0100 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2018-02-24 18:16:28 +0100 Assertions PID 111(hidd) Created UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968658.3" 00:00:00 id:0x0x900008094 [System: DeclUser kDisp] 2018-02-24 18:17:15 +0100 Notification Display is turned off 2018-02-24 18:17:15 +0100 Assertions PID 522(AddressBookSourceSync) Summary PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:31 id:0x0x10000813d [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 60(powerd) Summary ExternalMedia "com.apple.powermanagement.externalmediamounted" 00:00:59 id:0x0x800008006 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) Summary UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 313(UserEventAgent) Summary BackgroundTask "com.apple.SafariBookmarksSyncAgent.XPC.ZoneSubscriptionRegistration" 00:00:41 id:0x0xb000080c7 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 88(apsd) Summary ApplePushServiceTask "com.apple.apsd-login" 00:00:42 id:0x0xb000080a2 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 69(mds) Summary BackgroundTask "com.apple.metadata.mds.power" 00:00:58 id:0x0xb0000800b [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions Kernel Idle sleep preventers: -None- 2018-02-24 18:17:15 +0100 Assertions PID 60(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd00008166 [System: PrevIdle DeclUser SRPrevSleep kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 88(apsd) Released ApplePushServiceTask "com.apple.apsd-login" 00:00:42 id:0x0xb000080a2 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) TurnedOn UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) TurnedOn UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:30 +0100 Assertions PID 60(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd00008166 [System: PrevIdle DeclUser SRPrevSleep kCPU kDisp] 2018-02-24 18:17:30 +0100 Assertions Summary- [System: PrevIdle DeclUser kDisp] Using AC Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: 6E9C32D5-3ABE-413D-AE5C-423A7906055B 2018-02-24 18:17:30 +0100 Sleep Entering Sleep state due to 'Software Sleep pid=106': Using AC (Charge:0%) 2018-02-24 18:17:32 +0100 Wake Requests [proc=mDNSResponder request=Maintenance inDelta=7198] [proc=dasd request=SleepService inDelta=67506] [*proc=dasd request=TimerPlugin inDelta=1798 info="com.apple.dasd:0:com.apple.apsd.apprefresh"] 2018-02-24 18:17:32 +0100 PM Client Acks Delays to Sleep notifications: [com.apple.apsd is slow(2108 ms)] 2018-02-24 18:18:41 +0100 HibernateStats hibmode=0 standbydelay=0 0 Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: Unknown UUID 2018-02-24 18:18:41 +0100 Failure Sleep Failure [code:0xFFFFFFFF0400001F]: Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Notice the Sleep Failure [code:0xFFFFFFFF0400001F] but I have no idea what that means. Send me silverstar.silvernet.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 24, 2018 Author Share Posted February 24, 2018 Excuse me, Asus Z170A, i7 6700K, EVGA 1070 all is ok u test with other usb3 device? Update ur clover bootloader Clover_v2.4k_r4416.pkg.zip 1 Link to comment Share on other sites More sharing options...
vinpo Posted February 24, 2018 Share Posted February 24, 2018 all is ok u test with other usb3 device? Update ur clover bootloader Clover_v2.4k_r4416.pkg.zip updated clover efi, but nothing seems to happen. The clover folder is the same you send me for High Sierra 10.13.3 On opening some pictures something strange happens... there's no image, only freeze! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 25, 2018 Author Share Posted February 25, 2018 OK, here is the result of runme.zip I noticed that your tool dumped the Clover Folder of my startup volume, not the USB stick where it actually run from, so I corrected that and repacked the folder. Shortly before I ran this app, I did another failed sleep attempt, maybe this helps with debugging. And here is the output of such a failed attempt by pmset -g log Sleep/Wakes since boot at 2018-02-24 17:44:54 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: (null) 2018-02-24 18:16:13 +0100 Start powerd process is started 2018-02-24 18:16:13 +0100 Assertions Summary- [System: No Assertions] Using AC 2018-02-24 18:16:16 +0100 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2018-02-24 18:16:28 +0100 Assertions PID 111(hidd) Created UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968658.3" 00:00:00 id:0x0x900008094 [System: DeclUser kDisp] 2018-02-24 18:17:15 +0100 Notification Display is turned off 2018-02-24 18:17:15 +0100 Assertions PID 522(AddressBookSourceSync) Summary PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:31 id:0x0x10000813d [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 60(powerd) Summary ExternalMedia "com.apple.powermanagement.externalmediamounted" 00:00:59 id:0x0x800008006 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) Summary UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 313(UserEventAgent) Summary BackgroundTask "com.apple.SafariBookmarksSyncAgent.XPC.ZoneSubscriptionRegistration" 00:00:41 id:0x0xb000080c7 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 88(apsd) Summary ApplePushServiceTask "com.apple.apsd-login" 00:00:42 id:0x0xb000080a2 [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 69(mds) Summary BackgroundTask "com.apple.metadata.mds.power" 00:00:58 id:0x0xb0000800b [System: PrevIdle DeclUser kDisp] 2018-02-24 18:17:15 +0100 Assertions Kernel Idle sleep preventers: -None- 2018-02-24 18:17:15 +0100 Assertions PID 60(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd00008166 [System: PrevIdle DeclUser SRPrevSleep kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 88(apsd) Released ApplePushServiceTask "com.apple.apsd-login" 00:00:42 id:0x0xb000080a2 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) TurnedOn UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:15 +0100 Assertions PID 111(hidd) TurnedOn UserIsActive "com.apple.iohideventsystem.queue.tickle.4294968900.17" 00:00:00 id:0x0x900008094 [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp] 2018-02-24 18:17:30 +0100 Assertions PID 60(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd00008166 [System: PrevIdle DeclUser SRPrevSleep kCPU kDisp] 2018-02-24 18:17:30 +0100 Assertions Summary- [System: PrevIdle DeclUser kDisp] Using AC Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: 6E9C32D5-3ABE-413D-AE5C-423A7906055B 2018-02-24 18:17:30 +0100 Sleep Entering Sleep state due to 'Software Sleep pid=106': Using AC (Charge:0%) 2018-02-24 18:17:32 +0100 Wake Requests [proc=mDNSResponder request=Maintenance inDelta=7198] [proc=dasd request=SleepService inDelta=67506] [*proc=dasd request=TimerPlugin inDelta=1798 info="com.apple.dasd:0:com.apple.apsd.apprefresh"] 2018-02-24 18:17:32 +0100 PM Client Acks Delays to Sleep notifications: [com.apple.apsd is slow(2108 ms)] 2018-02-24 18:18:41 +0100 HibernateStats hibmode=0 standbydelay=0 0 Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: Unknown UUID 2018-02-24 18:18:41 +0100 Failure Sleep Failure [code:0xFFFFFFFF0400001F]: Sleep/Wakes since boot at 2018-02-24 18:16:13 +0100 :0 Dark Wake Count in this sleep cycle:0 Notice the Sleep Failure [code:0xFFFFFFFF0400001F] but I have no idea what that means. try a darkwake option in clover to avoid generic sata, use it AHCIPortInjector.kext.zip updated clover efi, but nothing seems to happen. The clover folder is the same you send me for High Sierra 10.13.3 ye, i use sierra too, and patches is the same, u have all 2 Link to comment Share on other sites More sharing options...
frankiee Posted February 25, 2018 Share Posted February 25, 2018 try a darkwake option in clover But which one? Already tried some of the combinations, but with no luck so far. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 25, 2018 Author Share Posted February 25, 2018 updated clover efi, but nothing seems to happen. The clover folder is the same you send me for High Sierra 10.13.3 On opening some pictures something strange happens... there's no image, only freeze! look like a video problem But which one? Already tried some of the combinations, but with no luck so far. need a test 1 Link to comment Share on other sites More sharing options...
frankiee Posted February 25, 2018 Share Posted February 25, 2018 Tried various darkwake combinations again, this time with your config, and it does not solve the problem. Only thing I saw is that with some settings, the HDD LED does not blink anymore when trying to wake, but wake still does not work. (POST LED on the Mobo still "goes crazy" though) I also saw during my research that other users experience exact the same symptoms, and all of them seem to run on ASUS X79 boards. I guess the problem is pretty "low level". I also wonder why it always worked before, and without any need to set something special, for example I never had to do anything with darkwake before. So something is different with 10.13 ... I also tried resetting CMOS, rebuilding BIOS settings from scratch and even tried an older BIOS version, with no success. Any ideas what else I could do? I am running out of options ... Link to comment Share on other sites More sharing options...
FrankYates Posted February 25, 2018 Share Posted February 25, 2018 Hi, guys (and perhaps MaLd0n, in particular), I am not experienced when it comes to Hackintoshing, and have been having a few issues installing High Sierra (10.13.3) on my rig, which is the following: Motherboard: ASRock Rack EP2C612D16C-4L CPU (x2): Intel Xeon E5-2630v4 ES 2.2GhHz (10-Core, 20-thread) RAM: (8x16GB=128GB) CT16G4RFD824A Crucial 16GB PC4-19200 DDR4-2400MHz ECC Registered GPU: ASUS NVidia GTX 1050 Ti-4G Sound: Soundblaster Audigy FX Bluetooth: ASUS Ethernet: 4 x Gigabit lan (Intel i210 controller) The installation freezes after the initial steps. I tried using the built-in display adapter but had identical results, so I re-installed the Nvidia card. I was wondering if someone more knowledgeable than I am would give me a hand. Thanks! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Author Share Posted February 26, 2018 Hi, guys (and perhaps MaLd0n, in particular), I am not experienced when it comes to Hackintoshing, and have been having a few issues installing High Sierra (10.13.3) on my rig, which is the following: Motherboard: ASRock Rack EP2C612D16C-4L CPU (x2): Intel Xeon E5-2630v4 ES 2.2GhHz (10-Core, 20-thread) RAM: (8x16GB=128GB) CT16G4RFD824A Crucial 16GB PC4-19200 DDR4-2400MHz ECC Registered GPU: ASUS NVidia GTX 1050 Ti-4G Sound: Soundblaster Audigy FX Bluetooth: ASUS Ethernet: 4 x Gigabit lan (Intel i210 controller) The installation freezes after the initial steps. I tried using the built-in display adapter but had identical results, so I re-installed the Nvidia card. I was wondering if someone more knowledgeable than I am would give me a hand. Thanks! send me clover folder inside installer 2 Link to comment Share on other sites More sharing options...
dandinggeL Posted February 26, 2018 Share Posted February 26, 2018 Hey big bro, if you have free time, do me a favour , that will be appreciate... my laptop is running 10.11.6, and I installed 10.12.6 a few days ago, I use same DSDT and SSDT files, most problems had been resolved,,,but the wake still exist since 10.11.6, I know little about DSDT, I installed with a set of EFI of another boy,,,we are using a same mode, I try to inject EDID with Clover,,,failed,,, Problem: sleep-> sleep light flash (OK) -> wake up ... black screen...reboot( after 1 minute) and forgive my poor English ( CET 4 failed) files.zip Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: 14C65C20-FD24-4D3F-AE4B-22B031809BD6 2018-02-26 11:35:48 +0000 Notification Display is turned off 2018-02-26 11:35:48 +0000 Assertions Kernel Idle sleep preventers: -None- 2018-02-26 11:35:48 +0000 Assertions PID 53(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd000004c5 [system: SRPrevSleep kCPU] 2018-02-26 11:36:03 +0000 Assertions PID 53(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd000004c5 [system: SRPrevSleep kCPU] 2018-02-26 11:36:03 +0000 Sleep Entering Sleep state due to 'Clamshell Sleep': Using AC (Charge:100%) 0 secs 2018-02-26 11:36:03 +0000 Assertions PID 53(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00 id:0x0xd000004d5 [system: BGTask SRPrevSleep kCPU] 2018-02-26 11:36:03 +0000 DarkWake DarkWake [CDN] due to /HID Activity: Using AC (Charge:100%) 1 secs 2018-02-26 11:36:03 +0000 Assertions PID 53(powerd) Created InternalPreventSleep "com.apple.powermanagement.acwakelinger" 00:00:00 id:0x0xd000004d6 [system: BGTask SRPrevSleep kCPU] 2018-02-26 11:36:03 +0000 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2018-02-26 11:36:03 +0000 Notification Display is turned on 2018-02-26 11:36:04 +0000 Wake DarkWake to FullWake [CDNVA] due to HID Activity: Using AC (Charge:100%) 27 secs 2018-02-26 11:36:04 +0000 Kernel Client Acks Delays to Wake notifications: [AppleHDADriver driver is slow(msg: SetState to 1)(435 ms)] [CodecCommanderPowerHook driver is slow(msg: SetState to 2)(523 ms)] 2018-02-26 11:36:15 +0000 Assertions PID 53(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:11 id:0x0xd000004d5 [system: BGTask SRPrevSleep kCPU] 2018-02-26 11:36:31 +0000 PM Client Acks Delays to Wake notifications: [com.apple.apsd timed out(28000 ms)] 2018-02-26 11:36:31 +0000 Assertions PID 92(mDNSResponder) Created MaintenanceWake "mDNSResponder:maintenance" 00:00:00 id:0x0xd000004e4 [system: BGTask SRPrevSleep kCPU] Sleep/Wakes since boot at 2018-02-26 09:00:15 +0000 :0 Dark Wake Count in this sleep cycle:1 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: 61DCBD88-04E9-40D3-ACEF-F9C36E3177DA 2018-02-26 11:36:31 +0000 Sleep Entering DarkWake state due to 'Clamshell Sleep': Using AC (Charge:100%) 2018-02-26 11:36:31 +0000 Assertions PID 53(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd000004e8 [system: BGTask SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:31 +0000 Assertions PID 92(mDNSResponder) Released MaintenanceWake "mDNSResponder:maintenance" 00:00:00 id:0x0xd000004e4 [system: BGTask SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:33 +0000 Notification Display is turned off 2018-02-26 11:36:33 +0000 Assertions PID 53(powerd) Summary InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:02 id:0x0xd000004e8 [system: SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:33 +0000 Assertions PID 53(powerd) Summary InternalPreventSleep "com.apple.powermanagement.acwakelinger" 00:00:29 id:0x0xd000004d6 [system: SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:33 +0000 Assertions PID 77(apsd) Summary InteractivePushServiceTask "com.apple.apsd-wakeconnection-push.apple.com" 00:00:02 id:0x0x12000004e5 [system: SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:33 +0000 Assertions Kernel Idle sleep preventers: -None- 2018-02-26 11:36:46 +0000 Assertions PID 53(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd000004e8 [system: SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:46 +0000 Summary- [system: SRPrevSleep IPushSrvc kCPU] Using AC(Charge: 100) 2018-02-26 11:36:49 +0000 Assertions PID 53(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.acwakelinger" 00:00:45 id:0x0xd000004d6 [system: SRPrevSleep IPushSrvc kCPU] 2018-02-26 11:36:49 +0000 Summary- [system: IPushSrvc] Using AC(Charge: 100) 2018-02-26 11:36:49 +0000 Sleep Entering Sleep state due to 'Clamshell Sleep': Using AC (Charge:100%) 2018-02-26 11:36:49 +0000 Assertions PID 77(apsd) Released InteractivePushServiceTask "com.apple.apsd-keepalive-push.apple.com" 00:00:10 id:0x0x12000004f1 [system: IPushSrvc] 2018-02-26 11:40:03 +0000 BatteryHealth Battery health: Check Battery Sleep/Wakes since boot at 2018-02-26 09:00:15 +0000 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: (null) 2018-02-26 11:40:04 +0000 Start powerd process is started 2018-02-26 11:40:04 +0000 Summary- [system: No Assertions] Using AC(Charge: 100) 2018-02-26 11:40:04 +0000 Assertions Kernel Idle sleep preventers: IODisplayWrangler 2018-02-26 11:41:07 +0000 Assertions PID 42(UserEventAgent) Released BackgroundTask "com.apple.metadata.mds_stores.power" 00:01:01 id:0x0xb00000135 [system: PrevIdle BGTask] 2018-02-26 11:41:17 +0000 Assertions PID 42(UserEventAgent) Released BackgroundTask "com.apple.metadata.mds.power" 00:01:11 id:0x0xb00000134 [system: PrevIdle BGTask] 2018-02-26 11:41:17 +0000 Assertions PID 334(AddressBookSourceSync) Released PreventUserIdleSystemSleep "Address Book Source Sync" 00:01:00 id:0x0x1000001a6 [system: BGTask] 2018-02-26 11:41:17 +0000 Assertions PID 273(UserEventAgent) Released BackgroundTask "com.apple.AddressBook.ScheduledSync" 00:01:00 id:0x0xb000001a7 [system: BGTask] 2018-02-26 11:41:46 +0000 Assertions PID 77(apsd) Released ApplePushServiceTask "com.apple.apsd-login" 00:01:32 id:0x0xb00000162 [system: IPushSrvc] Sleep/Wakes since boot at 2018-02-26 11:40:04 +0000 :0 Dark Wake Count in this sleep cycle:0 Time stamp Domain Message Duration Delay ========== ====== ======= ======== ===== UUID: FFF7AD7C-C1B0-4325-8718-DEEB042AB6B9 2018-02-26 11:42:32 +0000 Notification Display is turned off 2018-02-26 11:42:32 +0000 Assertions Kernel Idle sleep preventers: -None- 2018-02-26 11:42:32 +0000 Assertions PID 53(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0x0xd00000203 [system: SRPrevSleep kCPU] 2018-02-26 11:42:47 +0000 Assertions PID 53(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0x0xd00000203 [system: SRPrevSleep kCPU] 2018-02-26 11:42:47 +0000 Sleep Entering Sleep state due to 'Software Sleep pid=97': Using AC (Charge:100%) 2018-02-26 11:43:15 +0000 PM Client Acks Delays to Sleep notifications: [com.apple.apsd timed out(28000 ms)] 2018-02-26 12:43:45 +0000 BatteryHealth Battery health: Check Battery Sleep/Wakes since boot at 2018-02-26 11:40:04 +0000 :0 Dark Wake Count in this sleep cycle:0 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Author Share Posted February 26, 2018 Hey big bro, if you have free time, do me a favour , that will be appreciate... my laptop is running 10.11.6, and I installed 10.12.6 a few days ago, I use same DSDT and SSDT files, most problems had been resolved,,,but the wake still exist since 10.11.6, I know little about DSDT, I installed with a set of EFI of another boy,,,we are using a same mode, I try to inject EDID with Clover,,,failed,,, Problem: sleep-> sleep light flash (OK) -> wake up ... black screen...reboot( after 1 minute) and forgive my poor English ( CET 4 failed) files.zip Feb 26 11:40:08 Ones-MacBook-Pro loginwindow[97]: IASGetCurrentInstallPhaseList: no install phase array set Feb 26 11:40:08 Ones-MacBook-Pro loginwindow[97]: IASGetCurrentInstallPhase: no install phase set Feb 26 11:40:11 Ones-MacBook-Pro softwareupdate_firstrun_tasks[91]: Host swscan.apple.com isReachable = YES Feb 26 11:40:15 Ones-MacBook-Pro installd[325]: installd: Starting Feb 26 11:40:15 Ones-MacBook-Pro installd[325]: installd: uid=0, euid=0 Feb 26 11:40:35 Ones-MacBook-Pro softwareupdate_notify_agent[441]: AssertionMgr: Take com.apple.softwareupdate.NotifyAgentAssertion assertion with type BackgroundTask for pid 441 Feb 26 11:40:35 Ones-MacBook-Pro softwareupdate_notify_agent[441]: Running for LoginDone Feb 26 11:40:35 Ones-MacBook-Pro softwareupdate_notify_agent[441]: Waiting 1 seconds before sending the notification to App Store Feb 26 11:40:36 Ones-MacBook-Pro softwareupdated[442]: softwareupdated: Starting with build 10.11.6 (15G31) Feb 26 11:40:36 Ones-MacBook-Pro softwareupdated[442]: /Library/Bundles does not exist - watching for directory creation Feb 26 11:40:36 Ones-MacBook-Pro softwareupdated[442]: BackgroundActivity: Activity check-in with Interval 21600 Feb 26 11:40:36 Ones-MacBook-Pro softwareupdated[442]: Adding client SUUpdateServiceClient pid=441, uid=501, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_notify_agent) Feb 26 11:40:36 Ones-MacBook-Pro softwareupdate_notify_agent[441]: Notifying with params: { AutomaticCheckDisabled = 1; UpdateNotificationsOnly = 1; } Feb 26 11:40:36 Ones-MacBook-Pro softwareupdate_notify_agent[441]: appstoreupdateagent notified Feb 26 11:40:36 Ones-MacBook-Pro softwareupdated[442]: Removing client SUUpdateServiceClient pid=441, uid=501, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_notify_agent) Feb 26 11:40:37 Ones-MacBook-Pro softwareupdate_notify_agent[441]: All notifications finished - exiting Feb 26 11:40:37 Ones-MacBook-Pro softwareupdate_notify_agent[441]: AssertionMgr: Cancel com.apple.softwareupdate.NotifyAgentAssertion assertion for pid 441 Feb 26 11:40:41 Ones-MacBook-Pro softwareupdate_firstrun_tasks[91]: BuildTagCache: Building tag cache if necessary using catalog host swscan.apple.com Feb 26 11:40:41 Ones-MacBook-Pro softwareupdated[442]: Adding client SUUpdateServiceClient pid=91, uid=200, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_firstrun_tasks) Feb 26 11:40:41 Ones-MacBook-Pro softwareupdated[442]: BuildTagCache: Cache is current Feb 26 11:40:41 Ones-MacBook-Pro softwareupdate_firstrun_tasks[91]: BuildTagCache: Finished Feb 26 11:40:41 Ones-MacBook-Pro softwareupdated[442]: Removing client SUUpdateServiceClient pid=91, uid=200, installAuth=NO rights=(), transactions=0 (/System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdate_firstrun_tasks) send me a full files run it and wait finish RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
dandinggeL Posted February 26, 2018 Share Posted February 26, 2018 Run it in 10.11.6... Send me Ones-MacBook-Pro.zip Sorry , I am outside for lunch just now My device information ... and screen EDID CMN15C0.txt But something wrong when I run in 10.12.6 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Author Share Posted February 26, 2018 Run it in 10.11.6... Send me Ones-MacBook-Pro.zip Sorry , I am outside for lunch just now My device information ... and screen EDID QQ截图20180206133910.png 其他.png QQ截图20180206144150.png CMN15C0.txt But something wrong when I run in 10.12.6QQ20180226-0.jpg ur notebook have a two gpus? CLOVER.zip stay with USB Stick for tests 1 Link to comment Share on other sites More sharing options...
dandinggeL Posted February 26, 2018 Share Posted February 26, 2018 Yes,,, HD4600 and GTX 960M 1 Link to comment Share on other sites More sharing options...
iMiksa Posted February 26, 2018 Share Posted February 26, 2018 Hello I have an HP laptop model G72-130eg https://support.hp.com/us-en/product/hp-g72-100-notebook-pc-series/4078813/model/4171562/document/c02079107 I installed High Sierra on him. I have a lot of trouble with graphics. Becose i have 5430m ati. I work and success. First I used Amdframebufferutiliy picked up Hoolock FB and put in CloverMade a correction in AMD5000Controller.kext. replaced under Cedar 0x68e01002 with my 0x68e11002. Inject ati, load vbios, patch vbios. Got black screen. Put Framebuffer "Cedar" which is odd, becose its just a familly name, and got full qe/ci on hdmi output. after a while i change a smbios to MacbookAir6,2 becose i wanted a night shift to try. and got full qe/ci on all my screen.Copied config.plist, reinstall High Sierra. And since im newbie in this i need help.First i know that this is a junk notebook for today standards, but i love him. i want to use him as hackintosh only for movies, and browsing. My problems are Booting is slow as hell (2-3 min) i dont have ssd on him but this is just to muchI have "lag" in Clover boot menu (if i need to change something, i need to do it fast, or it will just stuck when i press ESC to return)when i log in need some time to load menubar etc. 1-2 minuteswhen i copy files its so slow With my modest knowledge i thing its problem with unrecognized chipset Its intel Arrandale i3 330m and intel chipset. So if you can guys help me to get my "old lady" works as it should Thanx in advance from Serbia miksa’s iMac.zip config.plist.zip origin.zip Send me miksas-iMac.zip 1 Link to comment Share on other sites More sharing options...
kuroshe Posted February 26, 2018 Share Posted February 26, 2018 hello again Mald0n, got a question for u, can i usea my igpu and my gt 740 at the same time? am asking cuz my gt 740 just have an hdmi port. thank u 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 26, 2018 Author Share Posted February 26, 2018 Yes,,, HD4600 and GTX 960M 显卡.png what device u disable DGPU? PEG0/PEGP? 2 Link to comment Share on other sites More sharing options...
dandinggeL Posted February 26, 2018 Share Posted February 26, 2018 DGPU? PEG0/PEGP?。。。I dont known this ,efi folder was copied from another bro,,,we are the same mode ,all hardware,.,sorry and another bad news。。。my system broke down ,,,I deleted 10.11.6 then installed 10.12.6,,,so , I thought I still have to trouble you , sorry maybe that bro had disabled, 1 Link to comment Share on other sites More sharing options...
Recommended Posts