duyvbsp Posted September 20, 2019 Share Posted September 20, 2019 Hello @MaLd0n I try use your CLOVER folder to boot my old clevo P370EM laptop but i'm stuck. My specs: i7-3610QM, 8GB DDR3, GTX970M single I attach my usb EFI folder bellow Pls help me to boot into macOS installation. Thanks a lot EFI.rar Link to comment Share on other sites More sharing options...
Paolo7297 Posted October 9, 2019 Share Posted October 9, 2019 Hello! @MaLd0n i tried to upgrade to catalina but the updater does not start. And also i'm not able to pair pamu slide (at first pair it's all okay, from the second one there are problems), there's something wrong here? Can you check my clover folder? Send me MacBook-Asus.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 9, 2019 Author Share Posted October 9, 2019 On 9/20/2019 at 12:32 AM, duyvbsp said: Hello @MaLd0n I try use your CLOVER folder to boot my old clevo P370EM laptop but i'm stuck. My specs: i7-3610QM, 8GB DDR3, GTX970M single I attach my usb EFI folder bellow Pls help me to boot into macOS installation. Thanks a lot EFI.rar check if problem is Embedded Controller Device 55 minutes ago, Paolo7297 said: Hello! @MaLd0n i tried to upgrade to catalina but the updater does not start. And also i'm not able to pair pamu slide (at first pair it's all okay, from the second one there are problems), there's something wrong here? Can you check my clover folder? Send me MacBook-Asus.zip u need check what cause it, idk Link to comment Share on other sites More sharing options...
Paolo7297 Posted October 10, 2019 Share Posted October 10, 2019 18 hours ago, MaLd0n said: u need check what cause it, idk It does not do anything else Link to comment Share on other sites More sharing options...
amuse.me Posted October 31, 2019 Share Posted October 31, 2019 (edited) hi can anyone help my spec is i7 860 lynnfield, mobo dfi lanparty p55 t3eh9, xfx rx470 i installed with uni beast method im stuck during apple loading, it restart every half way verbose picture attached right before restart Edited October 31, 2019 by amuse.me Link to comment Share on other sites More sharing options...
MaLd0n Posted October 31, 2019 Author Share Posted October 31, 2019 2 hours ago, amuse.me said: hi can anyone help my spec is i7 860 lynnfield, mobo dfi lanparty p55 t3eh9, xfx rx470 i installed with uni beast method im stuck during apple loading, it restart every half way verbose picture attached right before restart xfx is very problematic card under macos Link to comment Share on other sites More sharing options...
desmocrash Posted December 20, 2019 Share Posted December 20, 2019 Hello MaLd0n Following an installation of high sierra the usb3 no longer works. Can you help me please Thank you Asus z97m-Plus, I7 4770, hub Usb3 Envoyez-moi Imac-Pro-de-eusebio.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted December 20, 2019 Author Share Posted December 20, 2019 1 hour ago, desmocrash said: Hello MaLd0n Following an installation of high sierra the usb3 no longer works. Can you help me please Thank you Asus z97m-Plus, I7 4770, hub Usb3 Envoyez-moi Imac-Pro-de-eusebio.zip use this efi folder, reboot and extract new send_me https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip Link to comment Share on other sites More sharing options...
desmocrash Posted December 20, 2019 Share Posted December 20, 2019 Voila Send me Imac-Pro-de-eusebio.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted December 20, 2019 Author Share Posted December 20, 2019 3 hours ago, desmocrash said: Voila Send me Imac-Pro-de-eusebio.zip Arquivo Comprimido.zip Link to comment Share on other sites More sharing options...
desmocrash Posted December 20, 2019 Share Posted December 20, 2019 Obrigado MaLd0N Tudo bem Link to comment Share on other sites More sharing options...
wham17wham Posted December 30, 2019 Share Posted December 30, 2019 (edited) On 12/21/2019 at 2:10 AM, MaLd0n said: +++++++ Dear Doctor , I'm trying to upgrade my Mojave(10.14.1 works fine) to Catalina(10.15.2). As usual, I make a USB disk: sudo ---------------- install clover 5102 to USB copy current EFI to USB EFI Then first boot: Panic of course, following the panic info ,I put the AppleMCEreportDisabler.kext in USB then fixed(i think) The second try still no luck, it goes further but still not in the installation screen. The info always scroll out of the screen(mad).. panic: Setting P-Limit is unsupported on this system! I'm wondering, could you make a general issues(Q&A) for Upgrade User? Apple always upgrading, it is very very VERY annoying( I'm experienced 10.12-->10.13-->10.14--> crazzzzy!) . . Hardware: c602 + 2670x2 + nVidia GT740 Edited December 31, 2019 by wham17wham Link to comment Share on other sites More sharing options...
batpigman Posted January 2, 2020 Share Posted January 2, 2020 Hello @MaLd0n I added the PluginType flag to my config.plist and I see the correct plugin loaded in IOReg but when I run CPU stress tests, Intel Power Gadget shows that while it is correctly requesting (Req) 4.6Ghz, the Max never goes beyond 3.7Ghz (see screenshot). Also strange is that at full load, the temperature never rises above 40C. I also installed Ubuntu and ran stress tests on the same machine, and the CPU correctly ramped up to 4.6Ghz, so it would seem it is not a BIOS issue.For reference, Geekbench 4 on macOS gives ~4700 SC & ~18000 MC, while on Ubuntu I get ~6000 SC & ~22000 MC. Any help would be appreciated! Link to comment Share on other sites More sharing options...
desmocrash Posted January 2, 2020 Share Posted January 2, 2020 olá maldonVocê pode colocar meu arquivo "Arquivo Comprimido.zip" onlineporque meu HD quebrouObrigado e feliz ano novo Link to comment Share on other sites More sharing options...
MaLd0n Posted January 2, 2020 Author Share Posted January 2, 2020 1 minute ago, desmocrash said: olá maldonVocê pode colocar meu arquivo "Arquivo Comprimido.zip" onlineporque meu HD quebrouObrigado e feliz ano novo https://www.insanelymac.com/applications/core/interface/file/attachment.php?id=339366 Link to comment Share on other sites More sharing options...
desmocrash Posted January 2, 2020 Share Posted January 2, 2020 Merci Link to comment Share on other sites More sharing options...
Huberer Posted January 21, 2020 Share Posted January 21, 2020 (edited) @MaLd0n Would you be so kind and create a DSDT file for me (Gigabyte Z87MX-D3H) Thanks in advance Huberer Send me iMacOffice.zip Edited January 21, 2020 by Huberer Link to comment Share on other sites More sharing options...
nhoang82 Posted January 21, 2020 Share Posted January 21, 2020 Hi, I installed Catalina and it went fine. It seems to work fine except for one thing. It freeze on me whenever I used it for a while (could be hour or mins) and I had to do a hard reboot. I am at a dead end. Can you help me troubleshoot it? Thanks Link to comment Share on other sites More sharing options...
Huberer Posted January 25, 2020 Share Posted January 25, 2020 @MaLd0n would you be so kind a create a DSDT for me. The needed files are 2 postings above this one. Thanks in advance Link to comment Share on other sites More sharing options...
MaLd0n Posted January 26, 2020 Author Share Posted January 26, 2020 2 hours ago, Huberer said: @MaLd0n would you be so kind a create a DSDT for me. The needed files are 2 postings above this one. Thanks in advance DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
MACJO Posted February 6, 2020 Share Posted February 6, 2020 Hi, very happy to see that tou can help me. i have a asus z97 ac wifi 4790k with a 970 M2 1To, 980Ti, i16 go ddr3 1600. I have installed High sierra with tonymac tools.... sorry, but i have to start from a point, and the boot is very very slow. slower than my capitan with an ssd crucial. when i use fcpx the app quit. perhaps because the project is too heavy. Can you give me some advice please ? bye Link to comment Share on other sites More sharing options...
MaLd0n Posted February 6, 2020 Author Share Posted February 6, 2020 12 hours ago, MACJO said: Hi, start with one vanilla way Link to comment Share on other sites More sharing options...
jason761 Posted February 12, 2020 Share Posted February 12, 2020 (edited) Hi MaLd0n, I recently installed Catalina but I'm running into USB power delivery issues rendering some USB ports unusable. I enabled InjectUSB and HighCurrent but it doesn't fix the issue. With Catalina USBInjectAll + USB Port Limit Patch doesn't work anymore. Might have something to do with the EC in Catalina? I get the Apple logo distortion similar to this for a second before booting the login screen and everything works fine after. Send me Jasons-iMac.zip Edited February 12, 2020 by jason761 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2020 Author Share Posted February 13, 2020 18 hours ago, jason761 said: Hi MaLd0n ur config is very wrong, use only my folder with my dsdt DSDT.aml.zip remove FakePCIID.XHCIMux 1 Link to comment Share on other sites More sharing options...
freakermonguer Posted February 13, 2020 Share Posted February 13, 2020 Hi MaLd0n I upgraded my system from El Capitan to Mojave. I have a sandy bridge mobo. ASUS P8H67-M. I had sleep on El Capitan, but for some reason I don't after the update to Mojave. This is what happens. When I put the system to sleep the computer goes to sleep, but when I wake it up the screen doesn't come back and the keyboard caps-locks led blinks if any key is pressed, just that. Motherboard has a led that states "DRAM" and starts flashing in red. Also the reset button of the motherboard stops working. Only way to shut off the computer is by using the long press on the power button. Can you help me with this one? If you can, what do you need from me? Boot: Clover r5071 MB: P8H67-M GraphicC: Nvidia GT640 USB3: Inateck KTU3FR-4P - PCI card that works OOB with OSX Content of Clover/Kexts/Other: AppleAlc.kext Lilu.Kext RealtekRTL8111.kext USBInjectAll.kext VirtualSMC.kext WhateverGreen.kext Link to comment Share on other sites More sharing options...
Recommended Posts