Jump to content

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

MaLd0n

By MaLd0n,
in Installation Guides

 Share
2,509 posts in this topic

Recommended Posts

Guest ricoc90
Guest ricoc90
Posted
Posted (edited)
9 hours ago, MaLd0n said:

Check if work

DSDT.aml.zip


Thanks mate :D


The system boots fine, but iGPU does not work. It is listed under PCI devices in System report, but not under graphics. Also I got a kernel panic:

 

Spoiler 

*** Panic Report ***
panic(cpu 0 caller 0xffffff8017add16d): Kernel trap at 0xffffff7f9b5644e9, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000003f70, CR3: 0x0000000021579000, CR4: 0x00000000001626e0
RAX: 0x57c828b8739400e9, RBX: 0x0000000000000000, RCX: 0x0100000100000000, RDX: 0x0000000100000000
RSP: 0xffffff81fa453e60, RBP: 0xffffff81fa453e90, RSI: 0xffffff81fa453c8e, RDI: 0xffffff81d97f5000
R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff81d97f86d8, R11: 0x0000000000000000
R12: 0x0000000000000003, R13: 0x0000000000000000, R14: 0xffffff803c466000, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff7f9b5644e9, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000003f70, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff81fa453930 : 0xffffff80179af82d 
0xffffff81fa453980 : 0xffffff8017aeb795 
0xffffff81fa4539c0 : 0xffffff8017adcf4a 
0xffffff81fa453a30 : 0xffffff801795cae0 
0xffffff81fa453a50 : 0xffffff80179af247 
0xffffff81fa453b70 : 0xffffff80179af093 
0xffffff81fa453be0 : 0xffffff8017add16d 
0xffffff81fa453d50 : 0xffffff801795cae0 
0xffffff81fa453d70 : 0xffffff7f9b5644e9 
0xffffff81fa453e90 : 0xffffff7f9b557098 
0xffffff81fa453ed0 : 0xffffff801805947c 
0xffffff81fa453f30 : 0xffffff8018057562 
0xffffff81fa453f70 : 0xffffff8018056abc 
0xffffff81fa453fa0 : 0xffffff801795c0ce 
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelFramebufferAzul(12.0.8)[4DCEBE7C-8B0F-3F58-A7CF-2827C05F9888]@0xffffff7f9b535000->0xffffff7f9b699fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[54C3F778-4B95-3093-A51D-D761607C96CB]@0xffffff7f98295000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[7706F483-87AE-3F44-BCCA-09C156F4E031]@0xffffff7f98db1000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[2B970BDA-3F88-31F1-9A04-D52B72F2D784]@0xffffff7f989eb000
            dependency: com.apple.iokit.IOReportFamily(47)[86DDD149-2800-3D3E-9914-3556918455F1]@0xffffff7f989e4000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.14)[61BA5741-B8B8-32F6-A4D1-051861B0294D]@0xffffff7f985e7000
            dependency: com.apple.iokit.IOGraphicsFamily(530.60)[9E233908-09E1-332E-AE9B-CB27D514707B]@0xffffff7f9857e000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 debug=0x100 shikigva=60 -v 

Mac OS version:
18E226

 

 

 

EDIT:

 

I changed the platform id to 0d220003 and now the iGPU works :D

 

85103122_Schermafbeelding2019-04-12om09_40_45.png.a32de7a26b9fcfac2ff1138225d5f8e2.png

 

The only issue that's left seems to be that upon reboot from macOS, the system hangs upon Clover initialization. I have to hard reset in order to boot up

 

Send me Ricos-iMac.zip

 

Edited by ricoc90
Link to comment
Share on other sites
Ancora1975
Ancora1975
Posted
Posted

Good morning Sir

 

I have a Toshiba P50t-b-112 with the specs:

Satellite P50t-B-112

Part number: PSPNVE-01G006H2

·        Windows 8.1 (pre-installed) - Toshiba recommends Windows 10 Pro

·        4th generation Intel® Core™ i7-4710HQ processor with Intel® Turbo Boost Technology 2.0

·        39.6cm (15.6”) , Toshiba TruBrite® Ultra HD TFT High Brightness touch display with LED backlighting, 16 : 9 aspect ratio, 282 pixel per inch, colour calibrated by Chroma Tune™, Technicolor colour certified

·        Hard disk crucial ssd

·        Haswell platform

·        Ram:16,384 (8,192 + 8,192) MB, DDR3L RAM (1,600 MHz)

·        AMD Radeon™ R9 M265X Enthusiast Graphics with AMD Enduro™ Technology and Intel hd 4600 integrated.

I installed Mojave 10.14.4 but not Works neither Intel hd4600 nor radeon r9 m265x only 32mb or x8 pcie

I can not get full QE/Ci ir full graphics (only 32mb/x8 pcie) i think with dsdt ssdt i can fix this problem. You can find attached my ioreg and original tables.

Thanks for your effort and you support and thanks for your early reply 

 

Thanks in advance 

 

Dsdt ssdt + ioreg.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
11 hours ago, Ancora1975 said:

Good morning Sir

 

 

 

I have a Toshiba P50t-b-112 with the specs:

 

Satellite P50t-B-112

 

Part number: PSPNVE-01G006H2

 

·        Windows 8.1 (pre-installed) - Toshiba recommends Windows 10 Pro

 

·        4th generation Intel® Core™ i7-4710HQ processor with Intel® Turbo Boost Technology 2.0

 

·        39.6cm (15.6”) , Toshiba TruBrite® Ultra HD TFT High Brightness touch display with LED backlighting, 16 : 9 aspect ratio, 282 pixel per inch, colour calibrated by Chroma Tune™, Technicolor colour certified

 

·        Hard disk crucial ssd

 

·        Haswell platform

 

·        Ram:16,384 (8,192 + 8,192) MB, DDR3L RAM (1,600 MHz)

 

·        AMD Radeon™ R9 M265X Enthusiast Graphics with AMD Enduro™ Technology and Intel hd 4600 integrated.

 

I installed Mojave 10.14.4 but not Works neither Intel hd4600 nor radeon r9 m265x only 32mb or x8 pcie

 

I can not get full QE/Ci ir full graphics (only 32mb/x8 pcie) i think with dsdt ssdt i can fix this problem. You can find attached my ioreg and original tables.

 

Thanks for your effort and you support and thanks for your early reply 

 

 

 

Thanks in advance 

 

 

 

Dsdt ssdt + ioreg.zip

DSDT.aml.zip

is optimus notebook?

  • Like 1
Link to comment
Share on other sites
Ancora1975
Ancora1975
Posted
Posted
43 minutes ago, MaLd0n said:

DSDT.aml.zip

is optimus notebook?

Thanks sir. Now i only need to put this file in Efi/Clover/acpi/patched and restart? Or i have to make some changes in config.plist?

I attached my config.list and if you can suggest any idea to make Ati or Intel Hd4600 to get full graphics….i tried with different options (ig platform id with 0x0d220003 and 0a260006 and devices 0x04168086 and with 0x04128086...inject edid, load vios…) but nothing changes….I think that with your DSDT.aml i can´t fix this issue..

 

If i can fix this full graphics issue i supose this Will be an Optimus notebook because is a 4k laptop and faster.

 

Thanks for your early reply.

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
15 hours ago, duyvbsp said:

Hi @MaLd0n

 

I have an Dell optiplex 7010 SFF, can you help me DSDT

 

Here is my runme file

 

Send-me-HoangMaps-MacBook-Air.zip

DSDT.aml.zip

5 hours ago, Ancora1975 said:

Thanks sir. Now i only need to put this file in Efi/Clover/acpi/patched and restart? Or i have to make some changes in config.plist?

I attached my config.list and if you can suggest any idea to make Ati or Intel Hd4600 to get full graphics….i tried with different options (ig platform id with 0x0d220003 and 0a260006 and devices 0x04168086 and with 0x04128086...inject edid, load vios…) but nothing changes….I think that with your DSDT.aml i can´t fix this issue..

 

If i can fix this full graphics issue i supose this Will be an Optimus notebook because is a 4k laptop and faster.

 

Thanks for your early reply.

use hackintool

  • Like 1
Link to comment
Share on other sites
djuby
djuby
Posted
Posted (edited)

Hi,

 

I am trying to install Mojave on a Dell Latitude E5450:

 

CPU: Core i7 – 5600U @ 2.6 GHz
RAM: 16 GB DDR3
HDD: 256 SSD GB
Screen: 14 inch
Resolution: 1920×1080
Video Card: Intel HD5500 with nVidia GeForce 840M
 
Can you please recommend which guide to follow?
 
Edit: I figured out the guide and created the installation USB drive, but I get a kernel panic when trying to boot regardless of the Orarila Mojave image I try. Can someone help me out?
 
Best regards,
Djuby
Edited by djuby
Link to comment
Share on other sites
Huberer
Huberer
Posted
Posted

@MaLd0n

 

thank you very much for the dsdt. There's still one question I have. When I use the dsdt, do I still have to use the settings under Clover => ACPI, which you use under clover for the post installation.

Like: GFX0 to iGPU, HECI to IMEI, SAT0 to SATA,....

 

These settings must be fixed with DSDT or am I wrong?

 

Thanks in advance

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
4 hours ago, Huberer said:

@MaLd0n

 

thank you very much for the dsdt. There's still one question I have. When I use the dsdt, do I still have to use the settings under Clover => ACPI, which you use under clover for the post installation.

Like: GFX0 to iGPU, HECI to IMEI, SAT0 to SATA,....

 

These settings must be fixed with DSDT or am I wrong?

 

Thanks in advance

yes, u need

patches rename a ssdt oem, some devices like GFX0, HDEF have a some dependencies in SSDTs OEM, the best just avoid boot error, acpi warnings/errors is stay with patches ON

  • Like 2
Link to comment
Share on other sites
surfinchina
surfinchina
Posted
Posted

Hello from New Zealand @MaLd0n the hackintosh legend.

I've just started a new hack (laptop in sig) and have it going ok on High Sierra, but only in single user mode. Finally I want to get everything going, but for now, getting it out of single user mode would be great! Boot is super slow lol.

Not working is the 1050Ti, trackpad, sound. I think a big issue is the DSDT patch to stop the dedicated video card... I found it somewhere... I'm useless at patching lol.

I've attached run me and maybe you can get this out of single user mode for me!

Let me know if you need more info. 

Send me petes-Mac-Pro-2.fritz.box.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
16 hours ago, surfinchina said:

Hello from New Zealand @MaLd0n the hackintosh legend.

I've just started a new hack (laptop in sig) and have it going ok on High Sierra, but only in single user mode. Finally I want to get everything going, but for now, getting it out of single user mode would be great! Boot is super slow lol.

Not working is the 1050Ti, trackpad, sound. I think a big issue is the DSDT patch to stop the dedicated video card... I found it somewhere... I'm useless at patching lol.

I've attached run me and maybe you can get this out of single user mode for me!

Let me know if you need more info. 

Send me petes-Mac-Pro-2.fritz.box.zip

check if work, replace full EFI, reboot and extract new send_me

EFI.zip

 

if u have problems with screen backlight, disable PNLF patch in acpi tab

  • Like 1
Link to comment
Share on other sites
surfinchina
surfinchina
Posted
Posted
6 hours ago, MaLd0n said:

check if work, replace full EFI, reboot and extract new send_me

EFI.zip

 

if u have problems with screen backlight, disable PNLF patch in acpi tab

Thanks! It only starts in safe mode now, won't start normally or in single user mode. Battery works :)

I've attached the runme zip

Send me petes-Mac-Pro-2.zip

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...