MaLd0n Posted September 29, 2018 Author Share Posted September 29, 2018 1 hour ago, jaisyullah said: Hi mald0n, I am having trouble with my Asus A442U i7-7500U Notebook. Audio, Wifi, nvidia 930x, touchpad, brightness slider doesnt work, processor clockspeed didnt same. High Sierra Edition as MacBook Pro Any Help will be appreciated and i very highly would be donate Thanks Below just My Dump Send me Jaisyullahs-MacBook-Pro.zip DSDT.aml.zip VOODOOI2C Au need check site and create ur patch audio, check if id 3 work wifi, if is intel don't work nvidia, optimus don't work, u need use intelHD brightness Arquivo Comprimido.zip 1 Link to comment Share on other sites More sharing options...
tsader Posted September 29, 2018 Share Posted September 29, 2018 Hey Mald0n, Absolutely great work man! I am running Mojave at the moment but I did not install it as per your olarila app way. Do you recommend to install it your way and then extract DSDT? Or is it ok to run your Runme.app anyways? In any case I did run your app and attached it Thanks! Send me Bonnys-iMac-Pro.zip Link to comment Share on other sites More sharing options...
jlrycm Posted September 30, 2018 Share Posted September 30, 2018 (edited) hello Mald0n. I installed Mojave in my build, ga-z97-hd3 with nvidia gt710 (only until nvidia web drivers are available for my 1050ti). The hwsensors register cpu heatsink overheating and I don't know why...it was good but I was updating kexts and when restarted the sensor alarm appeared. Also, the usb ports are not working well. I have an internal pci-e usb 3.0 card in addition to the mobo usb 3.0 ports. I also have a mini pci-e wifi-bt combo card brc4360 which is working because of some patches that I made in the config file. Could you check and fix my clover folder and other settings? Send me iMac.zip Update: the cpu heatsink temp is back to 50 after a while, but when I plugged a speaker the cpu heatsink sensor is report a 91 temp. Edited September 30, 2018 by jlrycm Link to comment Share on other sites More sharing options...
MaLd0n Posted September 30, 2018 Author Share Posted September 30, 2018 10 hours ago, tsader said: Hey Mald0n, Absolutely great work man! I am running Mojave at the moment but I did not install it as per your olarila app way. Do you recommend to install it your way and then extract DSDT? Or is it ok to run your Runme.app anyways? In any case I did run your app and attached it Thanks! Send me Bonnys-iMac-Pro.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted September 30, 2018 Author Share Posted September 30, 2018 3 hours ago, jlrycm said: hello Mald0n. I installed Mojave in my build, ga-z97-hd3 with nvidia gt710 (only until nvidia web drivers are available for my 1050ti). The hwsensors register cpu heatsink overheating and I don't know why...it was good but I was updating kexts and when restarted the sensor alarm appeared. Also, the usb ports are not working well. I have an internal pci-e usb 3.0 card in addition to the mobo usb 3.0 ports. I also have a mini pci-e wifi-bt combo card brc4360 which is working because of some patches that I made in the config file. Could you check and fix my clover folder and other settings? Send me iMac.zip Update: the cpu heatsink temp is back to 50 after a while, but when I plugged a speaker the cpu heatsink sensor is report a 91 temp. DSDT.aml.zip Link to comment Share on other sites More sharing options...
Dan_Marshall Posted September 30, 2018 Share Posted September 30, 2018 hi MaLd0n - successfully updated my Dell E5450 to Mojave - install went well however no sound! tried a few things that did not work (added AppleALC, removed ALC293) however still no joy. Attached files from PCSend me Dans-Macbook-Pro-Hack.zip Link to comment Share on other sites More sharing options...
jlrycm Posted September 30, 2018 Share Posted September 30, 2018 (edited) 7 hours ago, MaLd0n said: DSDT.aml.zip Thanks a lot MaLd0n. No changes to the kexts or the config file are required? Edited September 30, 2018 by jlrycm Link to comment Share on other sites More sharing options...
jaisyullah Posted September 30, 2018 Share Posted September 30, 2018 22 hours ago, MaLd0n said: DSDT.aml.zip VOODOOI2C Au need check site and create ur patch audio, check if id 3 work wifi, if is intel don't work nvidia, optimus don't work, u need use intelHD brightness Arquivo Comprimido.zip Thank MaLd0n, but how about doesnt worked of wifi qualcomm 9377, alc2xx, tauchpad and my brightness. thanks Link to comment Share on other sites More sharing options...
MaLd0n Posted September 30, 2018 Author Share Posted September 30, 2018 7 hours ago, Dan_Marshall said: hi MaLd0n - successfully updated my Dell E5450 to Mojave - install went well however no sound! tried a few things that did not work (added AppleALC, removed ALC293) however still no joy. Attached files from PCSend me Dans-Macbook-Pro-Hack.zip Inject id via clover DSDT.aml.zip 3 hours ago, jaisyullah said: Thank MaLd0n, but how about doesnt worked of wifi qualcomm 9377, alc2xx, tauchpad and my brightness. thanks audio check here u need check ur hardware and search for it Brightness Arquivo Comprimido.zip 5 hours ago, jlrycm said: Thanks a lot MaLd0n. No changes to the kexts or the config file are required? use my clover folder for serie 9, check my app Link to comment Share on other sites More sharing options...
Dan_Marshall Posted September 30, 2018 Share Posted September 30, 2018 1 hour ago, MaLd0n said: Inject id via clover DSDT.aml.zip Hi mate, No luck - hack would not even boot past clover boot screen, had to divert back to old DSDT Link to comment Share on other sites More sharing options...
Neodymium Posted October 1, 2018 Share Posted October 1, 2018 Hi MaLd0n, I have mostly working installation (audio, trackpad etc.) except the following: - No Battery or Power Adapter Options in Energy Saver - Brightness increase or decrease doesn't work, icons show when I use fn + increase/decrease brightness on the keyboard - Anything battery related doesn't show - Bluetooth works with the Intel card, but no devices found, when searching - No sleep/wake options - Closing lid doesn't do anything Thanks for your help. Upload.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 1, 2018 Author Share Posted October 1, 2018 2 hours ago, Neodymium said: Hi MaLd0n, I have mostly working installation (audio, trackpad etc.) except the following: - No Battery or Power Adapter Options in Energy Saver - Brightness increase or decrease doesn't work, icons show when I use fn + increase/decrease brightness on the keyboard - Anything battery related doesn't show - Bluetooth works with the Intel card, but no devices found, when searching - No sleep/wake options - Closing lid doesn't do anything Thanks for your help. Upload.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
matemago Posted October 1, 2018 Share Posted October 1, 2018 good morning mr malon, i´m asking for your help with my dell 5542 inspiron. i just updated via app store to mojave and lost audio, backlight and system feels very laggy. i hope you can help me. thank you. Send me MacBook.zip Link to comment Share on other sites More sharing options...
betox Posted October 1, 2018 Share Posted October 1, 2018 This is my stuff. Glad if you help me. Send me Adrianss-MacBook-Pro.zip Link to comment Share on other sites More sharing options...
Neodymium Posted October 1, 2018 Share Posted October 1, 2018 14 hours ago, MaLd0n said: DSDT.aml.zip Hi MaLd0n, Thanks for the file, I have power options and lid sleep now. Thanks you. One problem is that the battery icon doesn't show and when I select "show battery status in menu" it automatically unchecks itself again. Screen brightness lowering or increasing still doesn't work., whether automatically or using keyboard fn keys. What am I missing? Should I use other kexts that what was in the package? Thanks. Link to comment Share on other sites More sharing options...
MaLd0n Posted October 1, 2018 Author Share Posted October 1, 2018 battery check rehabman repo Link to comment Share on other sites More sharing options...
cr0wtom Posted October 2, 2018 Share Posted October 2, 2018 Hello Guys, I have a Skylake i5-6600k with an asus z170-a, and with Mojave I faced most problems than ever. I cannot even boot now, and Clover is slow, even the transition from apple logo to the FileVault password is slow which is a first for my build. I have tried your config.plist, whith some changes for my system, but nothing. I attach a picture of my boot, at the time that it stops. Link to comment Share on other sites More sharing options...
gcrespiritu Posted October 2, 2018 Share Posted October 2, 2018 Good day. Im having trouble installing high sierra on haswell. It shows. This with the stop sign. Link to comment Share on other sites More sharing options...
MaLd0n Posted October 2, 2018 Author Share Posted October 2, 2018 update clover bootloader Clover_v2.4k_r4694.pkg.zip Link to comment Share on other sites More sharing options...
cr0wtom Posted October 2, 2018 Share Posted October 2, 2018 5 minutes ago, MaLd0n said: update clover bootloader Clover_v2.4k_r4694.pkg.zip Thanks for your answer! I updated clover before installing Mojave, which broke my install because of lack of OsxAptioFix3Drv-64.efi ! After I found this I managed to boot one time, but now there is no way of booting! Is there something else I can do? Link to comment Share on other sites More sharing options...
budi_ati Posted October 10, 2018 Share Posted October 10, 2018 Hi MaLd0n, i had install ,ojave and success but still have some problem. - Soud ALC282 already intall kext but, not working. Then i use voodooHDA but the sound very light. - microphone also didnt work - battery indicator is not show - sleep cant wake up. pelease edit DSDT and SSDT dor my laptop. Thank You. Send me br0wnd3i113sair.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 10, 2018 Author Share Posted October 10, 2018 24 minutes ago, budi_ati said: Hi MaLd0n, i had install ,ojave and success but still have some problem. - Soud ALC282 already intall kext but, not working. Then i use voodooHDA but the sound very light. - microphone also didnt work - battery indicator is not show - sleep cant wake up. pelease edit DSDT and SSDT dor my laptop. Thank You. Send me br0wnd3i113sair.zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
budi_ati Posted October 10, 2018 Share Posted October 10, 2018 45 minutes ago, MaLd0n said: DSDT.aml.zip Hi MaLd0n, Thank You.... But, still same applehda dont work dan battery... What can i do ? Link to comment Share on other sites More sharing options...
waters Posted October 10, 2018 Share Posted October 10, 2018 Hello MaLd0n, Please I need your support for Clover folder and dsdt-ssdt patching, Im not newbie on hackintoshing, but gave a huge 4 years gap since 10.10 's till Mojave As you can see from my partition table and screenshots; (inside attached file.) I have a 90% working mbr chameleon HSierra (Niresh) on one disk and decided to install guid Mojave on the other disk; (Bios is ahci legacy, not UEFI as I need legacy for other os.) I can success in getting QE/CI (HD4000) once in 10 times trial. ...need your clover support... But the main problem is; its an AllinOne PC, (no certain vendor but Acer did similars in 2013's) So, oncpu vga has only hdmi out and inside lvds connect (old 2013's one finger touch) I can only see from hdmi output, any osx installation will start from lvds screen and continue from hdmi output when choose your region screen starts at installation procedure. Specs; -------------------- 21.5 monitor, one finger touch, AllinOne PC touch need no driver, one finger press left mouse, stay 3 sec more: right mouse. thats all. H61 chipset; mainboard ECS H61H-G11 V1.0A Ivy bridge i5 3570K cpu, has HD4000 vga on it. hdmi out only, connected by lvds from inside like notebooks. 2x 4 gb ddr3 1333Mhz ram slim mainboard, no pci slots. very huge fans. 1 minipci slot connected Broadcom wifi works sound: realtek 662 +intel works network Realtek RTL811 works usb bluetooth (Belkin-Broadcom) works webcam works sd card reader Realtek works usb kb and mouse works i have no usb 3.0 ports, only 2.0 -------------------- note1: I cant install any external vga as the mainboard has no pci-e, pci, ... any slots available. no slot mainboard. note2: if i choose in clover dsdt file:bios.aml its different, if i choose file:dsdt.aml its different! note3: this (Mojave) is an installation of legacy, ahci bios, guid hdd. (not an uefi guid installation)... I think my smbios model should be iMac 13,2 - not 14,2 ??? SSDT.aml in main folder taken by ssdtPRGen.command Thanks. www.insanelymac.com_files.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 10, 2018 Author Share Posted October 10, 2018 -battery use rehabman repo -audio 1 Link to comment Share on other sites More sharing options...
Recommended Posts