Jump to content

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

MaLd0n

By MaLd0n,
in Installation Guides

 Share
2,509 posts in this topic

Recommended Posts

skyfly555
skyfly555
Posted
Posted (edited)

Hi again, @MaLd0n,

 

I wonder if you can help me with my "new" hackintosh: it's a HP Pavilion dv6-3153ss laptop, 1st gen i5-430M.

EDIT: My RunMe files (v2): https://www93.zippyshare.com/v/4Rule4az/file.html

Note: I realised if I boot with patched DSDT loaded, Clover, when doing F4, takes the patched one as it was the origin. So, I did "runme" process again without loading the patched DSDT I'm using in this moment, and it extracted the real "origin" DSDT.

 

I have cloned High Sierra 10.13.4 from a 2n gen i7 H3000 Pavilion dv6, created as described here.

And then I've taken a patched DSDT (I know, not the best idea), IntelHD kexts and config.plist from this other post (a very similar 1st gen dv6).

 

Now, I'd like to have my own patched DSDT, and the third USB working (only 2 of 3 work) - I don't know why the third USB is not working (DSDT, some incorrect kext...?).

 

Thank you very much for helping me,

Edited by skyfly555
Link to comment
Share on other sites
Babiloe
Babiloe
Posted
Posted (edited)
23 hours ago, MaLd0n said:

i edit it some time ago, no?

u can use same files, just update kexts

remove GenericUSBXHCI

AtherosWiFiInjector.kext.zip

 

Thank you, The WIFI 9285 168c,2b worked on El Capitan!!!!

After reading the herve WIRELESS CARDS

The working atheros cards compatible out of the box is 168c,30 

so dsdt patch is giving 168c,30 to told mac that is a compatible driver, not to tell in dsdt 168c,2b [as Rehabman patch for 9285, no need to edit to 2b]

i was wrong to tell 168c,2b it should be 168c,30. And using your AtherosWifiinjector in E/E it just works !!!

Thank you.  

 

Just can't sleep and full turn off now. when i turn off, the disk sleep, but the power still on...

how to debug sleep  turn off problem,?

 

Edited by Babiloe
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
5 hours ago, skyfly555 said:

Hi again, @MaLd0n,

 

I wonder if you can help me with my "new" hackintosh: it's a HP Pavilion dv6-3153ss laptop, 1st gen i5-430M.

EDIT: My RunMe files (v2): https://www93.zippyshare.com/v/4Rule4az/file.html

Note: I realised if I boot with patched DSDT loaded, Clover, when doing F4, takes the patched one as it was the origin. So, I did "runme" process again without loading the patched DSDT I'm using in this moment, and it extracted the real "origin" DSDT.

 

I have cloned High Sierra 10.13.4 from a 2n gen i7 H3000 Pavilion dv6, created as described here.

And then I've taken a patched DSDT (I know, not the best idea), IntelHD kexts and config.plist from this other post (a very similar 1st gen dv6).

 

Now, I'd like to have my own patched DSDT, and the third USB working (only 2 of 3 work) - I don't know why the third USB is not working (DSDT, some incorrect kext...?).

 

Thank you very much for helping me,

first generation clover have a good patches, usb, hpet, irqs, pic, tmr, rtc

2 hours ago, Alpha22 said:

use the usb for the boot used for the installation

Thanks

 

Fabio’s iMac .zip

looks good, for audio try other layouy id, check device HDEF in DSDT

  • Like 2
Link to comment
Share on other sites
skyfly555
skyfly555
Posted
Posted
4 hours ago, MaLd0n said:

first generation clover have a good patches, usb, hpet, irqs, pic, tmr, rtc

looks good, for audio try other layouy id, check device HDEF in DSDT

Just to be sure I understood: you are saying your "Clover install.zip" has a lot of "hot" (on-the-fly) DSDT patches inside of config.plist, aren't you? Thank you.

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
3 hours ago, skyfly555 said:

Just to be sure I understood: you are saying your "Clover install.zip" has a lot of "hot" (on-the-fly) DSDT patches inside of config.plist, aren't you? Thank you.

MaLd0n 2018-07-18 às 21.55.13.png

  • Like 2
Link to comment
Share on other sites
drphilth
drphilth
Posted
Posted
On 7/17/2018 at 6:38 PM, MaLd0n said:

ICH7, ICH9, ICH9 and ICH10 use Clover acpi patches, work good

 

Hello again,

 

 

I think everything is working, but the boot is very very slow. I've managed to get a clean vanilla High Sierra installed after I worked out why clover wasn't installing the bootloader properly.

 

I've noticed 3 or 4 potential problems from the verbose output.

 

1. I get this error from lilu 

Lilu:    file @ failed to find /private/var/db/dyld/dyld_shared_cache_x86_64h.map

 

2. I get an AppleSSE error in boot: 

AssertMacros: value (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleSSE/AppleSSE-116.70.10/AppleSSE/AppleSSE.cpp, line: 34

 

3. I get this error straight after: 

kernel: (pmtelemetry) Unsupported CPU
kernel: (pmtelemetry) Unsupported CPU
kernel: (pmtelemetry) Unsupported PCH

 

4. The system waits here for ages on each boot: 

kernel: busy timeout[0], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction'
kernel: busy timeout[1], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction'
kernel: busy timeout[2], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction'
kernel: busy extended ok[3], (60s, 207s)

 

Can you point me in the right direction for fixes for this?

Link to comment
Share on other sites
drphilth
drphilth
Posted
Posted
15 hours ago, MaLd0n said:

disable HDMI patch

 

I couldn't find any HDMI related stuff I had enabled in clover. But this led me to investigate NvidiaGraphicsFixup. It has just been replaced by an updated version of WhateverGreen, and once I removed the old NvidiaGraphicsFixup, Shikii and lilu kexts and added the new lilu and WhateverGreen, my boot is now much faster!

 

 

Thanks again MaLd0n!

Link to comment
Share on other sites
matgeo
matgeo
Posted
Posted

Can someone help me with dsdt , dust , kexts and confer.plist ? I'm running High Sierra 10.13.6.

 

My laptop is a Dell 3542 , with : i3-4005u 1.7ghz , 8gb ram , intel hd 4400 and I have a Broadcom BCM94352HMB network card , with I want (if possible) to be injected into dsdt.

 

Here are my dump files : https://mega.nz/#!Wd4EAIST!vDErHi1WvIKgf0N9otygE0RZwzVE_1nHvyCSIURRYuA

 

Thank you in advance.

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, eman.morales said:

sup with the IOREG dump failed when I use the RunME.app

 

 

and my PCI devices is empty in system info

 

z170mx gaming 5, vega 64 

Mojave?

  • Like 1
Link to comment
Share on other sites
cocoanut
cocoanut
Posted
Posted

Hi MaldOn,

I have installed macOSHigh Sierra 10.13.6 with FakeCPUID（0x0306F2）on my x99 platform. There are still some things that need to be done, such an sleep，etc

My computer:
Computer MSI MS-7885 
CPU Intel Core i7-6800K 
Motherboard MSI X99A RAIDER (MS-7885)
GPU Nvidia GeForce GTX 1060 6GB ( 6 GB / ZOTAC)
Memory 16GB ( 8G Corsair DDR4 2400MHz and 8G Gloway DDR4 2400MHz )
Main hard disk SanDisk SDSSDA120G ( 120 GB / SSD )
Displayer LG GSM5B09 LG Ultra HD ( 27.2 inch )
Sound Card Realtek ALC892 @ intel Wellsburg
Network adapter Intel Ethernet Connection I218-V

I also have posted at https://olarila.com/forum/viewtopic.php?t=6374&start=20
Thank you very much!

sendamehuangtiandeiMac-Pro.zip

origin dsdt and ssdt.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
21 minutes ago, cocoanut said:

Hi MaldOn,

I have installed macOSHigh Sierra 10.13.6 with FakeCPUID（0x0306F2）on my x99 platform. There are still some things that need to be done, such an sleep，etc

My computer:
Computer MSI MS-7885 
CPU Intel Core i7-6800K 
Motherboard MSI X99A RAIDER (MS-7885)
GPU Nvidia GeForce GTX 1060 6GB ( 6 GB / ZOTAC)
Memory 16GB ( 8G Corsair DDR4 2400MHz and 8G Gloway DDR4 2400MHz )
Main hard disk SanDisk SDSSDA120G ( 120 GB / SSD )
Displayer LG GSM5B09 LG Ultra HD ( 27.2 inch )
Sound Card Realtek ALC892 @ intel Wellsburg
Network adapter Intel Ethernet Connection I218-V

I also have posted at https://olarila.com/forum/viewtopic.php?t=6374&start=20
Thank you very much!

sendamehuangtiandeiMac-Pro.zip

origin dsdt and ssdt.zip

Posted in Olarila

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
10 hours ago, eman.morales said:

yes Mojave Beta 4 18A336e

app fail in mojave, need a extra permission for work, mojave is beta

9 hours ago, beesir said:

Power management is missing“gpuswitch” “tcpkeepalivepref”Two，

What is the reason? Sleep will restart. Sleeping

no idea

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...