MaLd0n Posted July 17, 2018 Author Share Posted July 17, 2018 3 hours ago, Alpha22 said: no, Maldon DSDT.aml.zip 2 Link to comment Share on other sites More sharing options...
skyfly555 Posted July 18, 2018 Share Posted July 18, 2018 (edited) Hi again, @MaLd0n, I wonder if you can help me with my "new" hackintosh: it's a HP Pavilion dv6-3153ss laptop, 1st gen i5-430M. EDIT: My RunMe files (v2): https://www93.zippyshare.com/v/4Rule4az/file.html Note: I realised if I boot with patched DSDT loaded, Clover, when doing F4, takes the patched one as it was the origin. So, I did "runme" process again without loading the patched DSDT I'm using in this moment, and it extracted the real "origin" DSDT. I have cloned High Sierra 10.13.4 from a 2n gen i7 H3000 Pavilion dv6, created as described here. And then I've taken a patched DSDT (I know, not the best idea), IntelHD kexts and config.plist from this other post (a very similar 1st gen dv6). Now, I'd like to have my own patched DSDT, and the third USB working (only 2 of 3 work) - I don't know why the third USB is not working (DSDT, some incorrect kext...?). Thank you very much for helping me, Edited July 18, 2018 by skyfly555 Link to comment Share on other sites More sharing options...
Alpha22 Posted July 18, 2018 Share Posted July 18, 2018 17 hours ago, MaLd0n said: DSDT.aml.zip use the usb for the boot used for the installation Thanks Fabio’s iMac .zip Link to comment Share on other sites More sharing options...
Babiloe Posted July 18, 2018 Share Posted July 18, 2018 (edited) 23 hours ago, MaLd0n said: i edit it some time ago, no? u can use same files, just update kexts remove GenericUSBXHCI AtherosWiFiInjector.kext.zip Thank you, The WIFI 9285 168c,2b worked on El Capitan!!!! After reading the herve WIRELESS CARDS The working atheros cards compatible out of the box is 168c,30 so dsdt patch is giving 168c,30 to told mac that is a compatible driver, not to tell in dsdt 168c,2b [as Rehabman patch for 9285, no need to edit to 2b] i was wrong to tell 168c,2b it should be 168c,30. And using your AtherosWifiinjector in E/E it just works !!! Thank you. Just can't sleep and full turn off now. when i turn off, the disk sleep, but the power still on... how to debug sleep turn off problem,? Edited July 18, 2018 by Babiloe Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 5 hours ago, skyfly555 said: Hi again, @MaLd0n, I wonder if you can help me with my "new" hackintosh: it's a HP Pavilion dv6-3153ss laptop, 1st gen i5-430M. EDIT: My RunMe files (v2): https://www93.zippyshare.com/v/4Rule4az/file.html Note: I realised if I boot with patched DSDT loaded, Clover, when doing F4, takes the patched one as it was the origin. So, I did "runme" process again without loading the patched DSDT I'm using in this moment, and it extracted the real "origin" DSDT. I have cloned High Sierra 10.13.4 from a 2n gen i7 H3000 Pavilion dv6, created as described here. And then I've taken a patched DSDT (I know, not the best idea), IntelHD kexts and config.plist from this other post (a very similar 1st gen dv6). Now, I'd like to have my own patched DSDT, and the third USB working (only 2 of 3 work) - I don't know why the third USB is not working (DSDT, some incorrect kext...?). Thank you very much for helping me, first generation clover have a good patches, usb, hpet, irqs, pic, tmr, rtc 2 hours ago, Alpha22 said: use the usb for the boot used for the installation Thanks Fabio’s iMac .zip looks good, for audio try other layouy id, check device HDEF in DSDT 2 Link to comment Share on other sites More sharing options...
Alpha22 Posted July 18, 2018 Share Posted July 18, 2018 (edited) Quote looks good, for audio try other layouy id, check device HDEF in DSDT --Replace with my Clover folder CLOVER Install.zip working audio, added appleALC.kext Fabio’s iMac .zip Edited July 18, 2018 by Alpha22 Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 1 hour ago, Alpha22 said: --Replace with my Clover folder CLOVER Install.zip working audio, added appleALC.kext Fabio’s iMac .zip i need update posts here here have all update https://olarila.com/forum/viewtopic.php?f=50&t=6255 2 Link to comment Share on other sites More sharing options...
skyfly555 Posted July 18, 2018 Share Posted July 18, 2018 4 hours ago, MaLd0n said: first generation clover have a good patches, usb, hpet, irqs, pic, tmr, rtc looks good, for audio try other layouy id, check device HDEF in DSDT Just to be sure I understood: you are saying your "Clover install.zip" has a lot of "hot" (on-the-fly) DSDT patches inside of config.plist, aren't you? Thank you. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 19, 2018 Author Share Posted July 19, 2018 3 hours ago, skyfly555 said: Just to be sure I understood: you are saying your "Clover install.zip" has a lot of "hot" (on-the-fly) DSDT patches inside of config.plist, aren't you? Thank you. 2 Link to comment Share on other sites More sharing options...
Alpha22 Posted July 19, 2018 Share Posted July 19, 2018 18 hours ago, MaLd0n said: i need update posts here here have all update https://olarila.com/forum/viewtopic.php?f=50&t=6255 ok Link to comment Share on other sites More sharing options...
ford22 Posted July 19, 2018 Share Posted July 19, 2018 Dell Inspiron N5110 8GB ram Intel Graphics HD3000+Nvidia GT 525M 1366x768 IDT 92HD87B1/3 DW1702 RTL8319/810x i7-2670QM please all clover add please or patched https://www5.zippyshare.com/v/0CiFgR4s/file.html N5110 (Maldon).zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 20, 2018 Author Share Posted July 20, 2018 UPDATE FIRST POST -CLOVER FOLDER -KEXTS -COSMETICS 2 Link to comment Share on other sites More sharing options...
drphilth Posted July 20, 2018 Share Posted July 20, 2018 On 7/17/2018 at 6:38 PM, MaLd0n said: ICH7, ICH9, ICH9 and ICH10 use Clover acpi patches, work good Hello again, I think everything is working, but the boot is very very slow. I've managed to get a clean vanilla High Sierra installed after I worked out why clover wasn't installing the bootloader properly. I've noticed 3 or 4 potential problems from the verbose output. 1. I get this error from lilu Lilu: file @ failed to find /private/var/db/dyld/dyld_shared_cache_x86_64h.map 2. I get an AppleSSE error in boot: AssertMacros: value (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleSSE/AppleSSE-116.70.10/AppleSSE/AppleSSE.cpp, line: 34 3. I get this error straight after: kernel: (pmtelemetry) Unsupported CPU kernel: (pmtelemetry) Unsupported CPU kernel: (pmtelemetry) Unsupported PCH 4. The system waits here for ages on each boot: kernel: busy timeout[0], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction' kernel: busy timeout[1], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction', 'IOHDACodecFunction' kernel: busy timeout[2], (60s): 'IOHDACodecFunction', 'IOHDACodecFunction' kernel: busy extended ok[3], (60s, 207s) Can you point me in the right direction for fixes for this? Link to comment Share on other sites More sharing options...
MaLd0n Posted July 20, 2018 Author Share Posted July 20, 2018 disable HDMI patch 1 1 Link to comment Share on other sites More sharing options...
drphilth Posted July 21, 2018 Share Posted July 21, 2018 15 hours ago, MaLd0n said: disable HDMI patch I couldn't find any HDMI related stuff I had enabled in clover. But this led me to investigate NvidiaGraphicsFixup. It has just been replaced by an updated version of WhateverGreen, and once I removed the old NvidiaGraphicsFixup, Shikii and lilu kexts and added the new lilu and WhateverGreen, my boot is now much faster! Thanks again MaLd0n! Link to comment Share on other sites More sharing options...
matgeo Posted July 22, 2018 Share Posted July 22, 2018 Can someone help me with dsdt , dust , kexts and confer.plist ? I'm running High Sierra 10.13.6. My laptop is a Dell 3542 , with : i3-4005u 1.7ghz , 8gb ram , intel hd 4400 and I have a Broadcom BCM94352HMB network card , with I want (if possible) to be injected into dsdt. Here are my dump files : https://mega.nz/#!Wd4EAIST!vDErHi1WvIKgf0N9otygE0RZwzVE_1nHvyCSIURRYuA Thank you in advance. Link to comment Share on other sites More sharing options...
eman.morales Posted July 28, 2018 Share Posted July 28, 2018 (edited) sup with the IOREG dump failed when I use the RunME.app and my PCI devices is empty in system info z170mx gaming 5, vega 64 Edited July 28, 2018 by eman.morales Link to comment Share on other sites More sharing options...
MaLd0n Posted July 28, 2018 Author Share Posted July 28, 2018 1 hour ago, eman.morales said: sup with the IOREG dump failed when I use the RunME.app and my PCI devices is empty in system info z170mx gaming 5, vega 64 Mojave? 1 Link to comment Share on other sites More sharing options...
cocoanut Posted July 28, 2018 Share Posted July 28, 2018 Hi MaldOn,I have installed macOSHigh Sierra 10.13.6 with FakeCPUID(0x0306F2)on my x99 platform. There are still some things that need to be done, such an sleep,etcMy computer: Computer MSI MS-7885 CPU Intel Core i7-6800K Motherboard MSI X99A RAIDER (MS-7885) GPU Nvidia GeForce GTX 1060 6GB ( 6 GB / ZOTAC) Memory 16GB ( 8G Corsair DDR4 2400MHz and 8G Gloway DDR4 2400MHz ) Main hard disk SanDisk SDSSDA120G ( 120 GB / SSD ) Displayer LG GSM5B09 LG Ultra HD ( 27.2 inch ) Sound Card Realtek ALC892 @ intel Wellsburg Network adapter Intel Ethernet Connection I218-V I also have posted at https://olarila.com/forum/viewtopic.php?t=6374&start=20Thank you very much! sendamehuangtiandeiMac-Pro.zip origin dsdt and ssdt.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 28, 2018 Author Share Posted July 28, 2018 21 minutes ago, cocoanut said: Hi MaldOn,I have installed macOSHigh Sierra 10.13.6 with FakeCPUID(0x0306F2)on my x99 platform. There are still some things that need to be done, such an sleep,etcMy computer: Computer MSI MS-7885 CPU Intel Core i7-6800K Motherboard MSI X99A RAIDER (MS-7885) GPU Nvidia GeForce GTX 1060 6GB ( 6 GB / ZOTAC) Memory 16GB ( 8G Corsair DDR4 2400MHz and 8G Gloway DDR4 2400MHz ) Main hard disk SanDisk SDSSDA120G ( 120 GB / SSD ) Displayer LG GSM5B09 LG Ultra HD ( 27.2 inch ) Sound Card Realtek ALC892 @ intel Wellsburg Network adapter Intel Ethernet Connection I218-V I also have posted at https://olarila.com/forum/viewtopic.php?t=6374&start=20Thank you very much! sendamehuangtiandeiMac-Pro.zip origin dsdt and ssdt.zip Posted in Olarila Link to comment Share on other sites More sharing options...
eman.morales Posted July 29, 2018 Share Posted July 29, 2018 10 hours ago, MaLd0n said: Mojave? yes Mojave Beta 4 18A336e Link to comment Share on other sites More sharing options...
beesir Posted July 29, 2018 Share Posted July 29, 2018 Power management is missing“gpuswitch” “tcpkeepalivepref”Two, What is the reason? Sleep will restart. Sleeping Link to comment Share on other sites More sharing options...
MaLd0n Posted July 29, 2018 Author Share Posted July 29, 2018 10 hours ago, eman.morales said: yes Mojave Beta 4 18A336e app fail in mojave, need a extra permission for work, mojave is beta 9 hours ago, beesir said: Power management is missing“gpuswitch” “tcpkeepalivepref”Two, What is the reason? Sleep will restart. Sleeping no idea 1 Link to comment Share on other sites More sharing options...
eman.morales Posted July 29, 2018 Share Posted July 29, 2018 7 hours ago, MaLd0n said: app fail in mojave, need a extra permission for work, mojave is beta so no way to run the app? or what's the perm I need Link to comment Share on other sites More sharing options...
MaLd0n Posted July 29, 2018 Author Share Posted July 29, 2018 26 minutes ago, eman.morales said: so no way to run the app? or what's the perm I need here u can extract using it too IORegistryExplorer.app.zip and it Patchmatic.zip 2 Link to comment Share on other sites More sharing options...
Recommended Posts