Jump to content

[Guide] El Capitan, Sierra / High Sierra / Mojave / Catalina on Intel 5, 6, 7, 8, 9 Chipset Series / Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell

MaLd0n

By MaLd0n,
in Installation Guides

 Share
2,509 posts in this topic

Recommended Posts

mrjayviper
mrjayviper
Posted
Posted

Just a question: Seems this guide is for creating a legacy booting not UEFI?

 

I asked since:

1. I downloaded the clover install.zip and it contains a driver64 folder

2. It doesn't tell what options to select during Clover installation. Some installation options are disabled once i select UEFI.

 

Basically I'm trying to get UEFI to boot using a USB installer and somehow it's not working.

 

I believe my board (see sig) supports UEFI since I run the Ubuntu USB installer using the UEFI bootable device option. Plus after installing Ubuntu, I get a "UEFI:ubuntu" in my bootable devices list.

 

Thanks

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
24 minutes ago, mrjayviper said:

Just a question: Seems this guide is for creating a legacy booting not UEFI?

 

I asked since:

1. I downloaded the clover install.zip and it contains a driver64 folder

2. It doesn't tell what options to select during Clover installation. Some installation options are disabled once i select UEFI.

 

Basically I'm trying to get UEFI to boot using a USB installer and somehow it's not working.

 

I believe my board (see sig) supports UEFI since I run the Ubuntu USB installer using the UEFI bootable device option. Plus after installing Ubuntu, I get a "UEFI:ubuntu" in my bootable devices list.

 

Thanks

use it for legacy

01.png

02.png

03.png

  • Like 2
Link to comment
Share on other sites
PencilNotPen
PencilNotPen
Posted
Posted

@MaLd0n Hi! Could you give me a hand getting macOS Mojave 10.14 Dev B2 running on my hack? I have a feeling it will need some specialist knowledge as it's very old hardware.

 

Intel i3-2105, HD3000 graphics. 

 

I have made the install USB, but have no idea what specific changes are needed (DSDT, kexts) for such an old system. I read here that 10.12.6 kexts are needed because Metal support has been dropped for Sandy Bridge in 10.14?

 

Let me know any other information you need, and thanks for any help you can give!

 

Obrigado,

 

Joaquim 

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, PencilNotPen said:

@MaLd0n Hi! Could you give me a hand getting macOS Mojave 10.14 Dev B2 running on my hack? I have a feeling it will need some specialist knowledge as it's very old hardware.

 

Intel i3-2105, HD3000 graphics. 

 

I have made the install USB, but have no idea what specific changes are needed (DSDT, kexts) for such an old system. I read here that 10.12.6 kexts are needed because Metal support has been dropped for Sandy Bridge in 10.14?

 

Let me know any other information you need, and thanks for any help you can give!

 

Obrigado,

 

Joaquim 

http://olarila.com/forum/viewtopic.php?f=59&t=6495

  • Like 1
Link to comment
Share on other sites
PencilNotPen
PencilNotPen
Posted
Posted

Thanks for the link, but that's the link I already posted in my comment. I have the kexts mentioned there, but can't get my install USB to boot in the first place. I would be grateful for more general details about which options are required for Sandy Bridge HD3000 and Mojave.

 

I have FakeID set, apfs.efi, FakeSMC.kext, and placed the Graphics kexts in the link into /kexts on the USB. But it won't boot. Could you walk me through from the very basics please?

 

Thanks very much!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, alboz83 said:

Hi MaLdOn, can you check my folder create with RunMe? I have clover folder take from your other thread for my GA-H97M-D3H mobo, but i have kexts on Library/Extensions. Thanks 

Send me iMac-di-Alberto.zip

CLOVER.zip

4 minutes ago, PencilNotPen said:

Thanks for the link, but that's the link I already posted in my comment. I have the kexts mentioned there, but can't get my install USB to boot in the first place. I would be grateful for more general details about which options are required for Sandy Bridge HD3000 and Mojave.

 

I have FakeID set, apfs.efi, FakeSMC.kext, and placed the Graphics kexts in the link into /kexts on the USB. But it won't boot. Could you walk me through from the very basics please?

 

Thanks very much!

u try with -x?

  • Like 2
Link to comment
Share on other sites
PencilNotPen
PencilNotPen
Posted
Posted

The install USB won't even boot to clover :-( not very helpful I know...

 

The BIOS hangs on "loading operating system" (Gigabyte) board. Never had this with Sierra/High Sierra, but I can't remember what options my Clover install USB needed then.

 

Which kexts and drivers and config.plist options are 100% needed for Sandy Bridge/HD 3000?

 

Thanks, I know this is a hard question because it's so vague. Once I get the USB booting I can be more helpful with information/errors... 

Link to comment
Share on other sites
PencilNotPen
PencilNotPen
Posted
Posted

Ok, I connected my hackintosh to my Mac in an external USB enclosure to make it easier. I installed Mojave onto the external drive, ran Clover on it, and then put it back in my hack. It now boots to Clover, but selecting the boot drive gives the "No Entry" symbol immediately, even with -x.

 

I have apfs.efi, FakeSMC, and all the graphics kexts from 10.12.6.

 

For Clover on the boot drive, I'm using boot0af in the ESP, which is what I used since Yosemite.

 

What might fix the "No Entry" symbol?

 

Thanks

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, PencilNotPen said:

Ok, I connected my hackintosh to my Mac in an external USB enclosure to make it easier. I installed Mojave onto the external drive, ran Clover on it, and then put it back in my hack. It now boots to Clover, but selecting the boot drive gives the "No Entry" symbol immediately, even with -x.

 

I have apfs.efi, FakeSMC, and all the graphics kexts from 10.12.6.

 

For Clover on the boot drive, I'm using boot0af in the ESP, which is what I used since Yosemite.

 

What might fix the "No Entry" symbol?

 

Thanks

no idea

1 hour ago, ford22 said:

Help bios send copy fixed AR5B125 please Windows or update bios please z710 lenovo

IMG_0132.jpg

u need a bios mod

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
39 minutes ago, ford22 said:

please fixed unlocked lenovo z710 please you can fixed save bios 

check google search

18 minutes ago, PencilNotPen said:

Ok, I've got it booting to the desktop now, but the system is non-responsive. Finder is greyed out, the mouse can move but nothing can be selected...

run my app, check first post and send me files

  • Like 1
Link to comment
Share on other sites
ford22
ford22
Posted
Posted

NVDIA GTX 1060 AUDIO HDMI fixed patched clover APPLEHDACOntroller  numer 10DEF110 please add where 

XI. Nvidia HDMI Audio/10.13.4

The process that enabled all Nvidia HDMI audio codecs has been disabled in 10.13.4 AppleHDAController.kext.  Device-ids for natively supported Nvidia graphics cards remain and work.

Supported Nvidia HDMI audio controller device ids (10.13.4 AppleHDAController):

  • DE 10 C0 0A
  • DE 10 94 0D
  • DE 10 E2 0B 
  • DE 10 E3 0B
  • DE 10 E4 0B 
  • DE 10 E5 0B 
  • DE 10 EB 0B
  • DE 10 E9 0B
  • DE 10 EA 0B 
  • DE 10 EE 0B
  • DE 10 08 0E 
  • DE 10 09 0E
  • DE 10 0A 0E 
  • DE 10 0B 0E
  • DE 10 1B 0E 
  • DE 10 1A 0E

Workarounds (select one):

  1. Backup 10.13.3/AppleHDA.kext_v280.12 prior 10 10.13.4 Update, install with kext installer to 10.13.4
  2. Add AppleHDAController patch to config.plist/KernelAndKextPatches/KextsToPatch with Xcode:
  3. AppleALC.kext Support
    • AppleALC.kext_v1.2.6 Support:
      • de100f0e
    • AppleALC.kext_v1.2.7+ Supported
      • de10ef10
      • de10f110
      • de10ba0f
      • de10b00f
      • de10bb0f
      • de10b80f
      • de10b90f
    • Edit AppleALC.kext with Xcode ((if Nvidia HDMI audio controller device id is not supported))
Link to comment
Share on other sites
PencilNotPen
PencilNotPen
Posted
Posted

Unfortunately, I can't run your app as the system becomes unresponsive before I can do anything. It boots fine to the login screen, and then freezes either there or right after logging in. Mouse can move but nothing can be selected. Are there new FirmwareFeatures and BIOS dates for Mojave which must be set in Clover? Could it be a problem with the Sierra Graphics kexts I am using?

Link to comment
Share on other sites
RandomTech
RandomTech
Posted
Posted

Olarila website has ruined two of my emails, I went to register now but the website said my email is in use, then changed to another email and waiting for activating forever.

 

Then I realized that I have already registered with the first email some years ago but couldn't have access to the web because of Activation email which couldn't be send to my email.. Now the same story with the second email..

 

PLEASE PLEASE PLEASE Mald0n delete my emails from Olarila

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
39 minutes ago, RandomTech said:

Olarila website has ruined two of my emails, I went to register now but the website said my email is in use, then changed to another email and waiting for activating forever.

 

Then I realized that I have already registered with the first email some years ago but couldn't have access to the web because of Activation email which couldn't be send to my email.. Now the same story with the second email..

 

PLEASE PLEASE PLEASE Mald0n delete my emails from Olarila

i'll check it, u check ur spam folder? ppl don't report nothing about it

  • Like 2
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
5 hours ago, RandomTech said:

Olarila website has ruined two of my emails, I went to register now but the website said my email is in use, then changed to another email and waiting for activating forever.

 

Then I realized that I have already registered with the first email some years ago but couldn't have access to the web because of Activation email which couldn't be send to my email.. Now the same story with the second email..

 

PLEASE PLEASE PLEASE Mald0n delete my emails from Olarila

send me ur email via PM

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...