Asteroids Posted February 12, 2018 Share Posted February 12, 2018 Try, Aste CLOVER.zip Thanks! I'll install and test later tonight, and get back to you tomorrow ~Asteroids~ 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 12, 2018 Author Share Posted February 12, 2018 Thanks! I'll install and test later tonight, and get back to you tomorrow ~Asteroids~ take a test for me, test all usb ports with one usb3 device, usb stick or external hdd let me know 2 Link to comment Share on other sites More sharing options...
Yragael Posted February 12, 2018 Share Posted February 12, 2018 Hi MaLd0n. I'm trying to get sleep working on my MSI ZH77A-G43, without success.It sleeps but at wake up I lose WiFi and it is very slow then freezes.Would you be kind to give it a look and give me some advice ? Send me iMac-de-Jean.zip 1 Link to comment Share on other sites More sharing options...
pokem Posted February 12, 2018 Share Posted February 12, 2018 Hi mald0n, good news! sound is working now AudioID is 29!! finally after hours testing every#, Big Thanks but internal mic still not working, it can be fixed?? green : work red : no (no idea with digital out) 1 Link to comment Share on other sites More sharing options...
desmocrash Posted February 12, 2018 Share Posted February 12, 2018 test ur USBs with device usb3, like usbstick usb3 test sleep, shutdown, etc Bom Dias MaLdOn, Tudo funciona perfeitamente Obrigado 1 Link to comment Share on other sites More sharing options...
wwwpuntoit Posted February 12, 2018 Share Posted February 12, 2018 Try replace DSDT in clover/acpi/patched, reboot DSDT.02.zip use it nvidia-update.command.zip Hi, what do you actually mean ? is there any guide around for downgrading drivers ? 1 Link to comment Share on other sites More sharing options...
Asteroids Posted February 12, 2018 Share Posted February 12, 2018 Okay, installed the Clover folder that you sent back: Boots fine, shutdown is fine, appears to Sleep (with fans stopping), but Kernel Panic on wake with power button (attempting to use USB-keyboard to wake does nothing). Attached the panic log. take a test for me, test all usb ports with one usb3 device, usb stick or external hdd let me know All ports work with a USB 2 Flash Drive, but do not work with a USB 3 Flash Drive. All ports (back panel or internally-connected USB2) give error message "USB Accessory Needs Power..." when trying to use a USB 3 Flash Drive. Thoughts? Kernel_panic_report_from_Logs---DiagnosticReports.zip 1 Link to comment Share on other sites More sharing options...
mR.GeeK Posted February 12, 2018 Share Posted February 12, 2018 Hello sir, Sorry i didn't reply to you earlier, but when you said that my problem was my HD5770 i was confused cause on my old rig i have the same GFX card. However, i managed to get it up and running, i'm on El Captain though as my music applications work best under this OS. Current setup is: Asus Sabertooth p67, i7 2600K, 16GB ram, HD5770 1GB, Crucial 275GB ssd with El Captain, and an extra Seagate HDD for data. I managed to instal using a bunch of guides on here (not this one) but all with your contribution, not surprised , i snatched a dsdt you made to a random post on here about sleep, and it worked after i changed a bunch of things, sleep works fine, although it drops network and i have to go to system preferences, usb3 is not working though. here is the files you requested, keep in mind i'm on El Captain. Thanks Send me Gasers-iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 12, 2018 Author Share Posted February 12, 2018 Hi MaLd0n. I'm trying to get sleep working on my MSI ZH77A-G43, without success. It sleeps but at wake up I lose WiFi and it is very slow then freezes. Would you be kind to give it a look and give me some advice ? CLOVER.zip Hi mald0n, good news! sound is working now AudioID is 29!! finally after hours testing every#, Big Thanks but internal mic still not working, it can be fixed?? ss.jpeg green : work red : no (no idea with digital out) check topic AppleAlc Bom Dias MaLdOn, Tudo funciona perfeitamente Obrigado Welcome! Hi, what do you actually mean ? is there any guide around for downgrading drivers ? try script Okay, installed the Clover folder that you sent back: Boots fine, shutdown is fine, appears to Sleep (with fans stopping), but Kernel Panic on wake with power button (attempting to use USB-keyboard to wake does nothing). Attached the panic log. All ports work with a USB 2 Flash Drive, but do not work with a USB 3 Flash Drive. All ports (back panel or internally-connected USB2) give error message "USB Accessory Needs Power..." when trying to use a USB 3 Flash Drive. Thoughts? Kernel_panic_report_from_Logs---DiagnosticReports.zip here we go CLOVER.zip send me one ioreg after reboot, check if USB work now Hello sir, Sorry i didn't reply to you earlier, but when you said that my problem was my HD5770 i was confused cause on my old rig i have the same GFX card. However, i managed to get it up and running, i'm on El Captain though as my music applications work best under this OS. Current setup is: Asus Sabertooth p67, i7 2600K, 16GB ram, HD5770 1GB, Crucial 275GB ssd with El Captain, and an extra Seagate HDD for data. I managed to instal using a bunch of guides on here (not this one) but all with your contribution, not surprised , i snatched a dsdt you made to a random post on here about sleep, and it worked after i changed a bunch of things, sleep works fine, although it drops network and i have to go to system preferences, usb3 is not working though. here is the files you requested, keep in mind i'm on El Captain. Thanks CLOVER.zip 4 Link to comment Share on other sites More sharing options...
mR.GeeK Posted February 12, 2018 Share Posted February 12, 2018 the files you just sent resulted in a very slow boot with a black screen at the end, my files were ok. I'll try to change SMBIOS back to 13.1 Edit 1: SMBIOS 13,1 also is slow and results in black screen after boot. 1 Link to comment Share on other sites More sharing options...
Asteroids Posted February 12, 2018 Share Posted February 12, 2018 here we go CLOVER.zip send me one ioreg after reboot, check if USB work now Hi MaLd0n, After installing the updated Clover folder, the USB ports are much better. The USB2 and the USB3 ports now work (the only one I can't test is the USB3 jack on the Motherboard). The USB3 ones also are running at USB3 speeds. Sleep still panics when I try to 'wake up' the machine. USB Keyboard will not wake it at all, so I have to use the power button. I don't know what to do to get Sleep working. Definite progress... Thanks! Attached is the IOReg you requested. oscar’s iMac_Z97_PCMate_after_2nd_CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 12, 2018 Author Share Posted February 12, 2018 the files you just sent resulted in a very slow boot with a black screen at the end, my files were ok. I'll try to change SMBIOS back to 13.1 Edit 1: SMBIOS 13,1 also is slow and results in black screen after boot. Use fresh install, check first post, it's not normal Hi MaLd0n, After installing the updated Clover folder, the USB ports are much better. The USB2 and the USB3 ports now work (the only one I can't test is the USB3 jack on the Motherboard). The USB3 ones also are running at USB3 speeds. Sleep still panics when I try to 'wake up' the machine. USB Keyboard will not wake it at all, so I have to use the power button. I don't know what to do to get Sleep working. Definite progress... Thanks! Attached is the IOReg you requested. oscar’s iMac_Z97_PCMate_after_2nd_CLOVER.zip ioreg is good the k.p is very strange, is nothing about kexts, looks Power Management problem try generate SSDT for PM and check if solve SSDT_Automator.zip about wake from mouse we check it 1 Link to comment Share on other sites More sharing options...
Yragael Posted February 13, 2018 Share Posted February 13, 2018 Unfortunately my "hackenstein" has still same behavior.Still slow at sleep and wake up, then it is unusable.Wifi cannot reconnect.Logs are unusable (at least for me, was used to syslog). Any idea ? Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2018 Author Share Posted February 13, 2018 Unfortunately my "hackenstein" has still same behavior. Still slow at sleep and wake up, then it is unusable. Wifi cannot reconnect. Logs are unusable (at least for me, was used to syslog). Any idea ? try a KernelXCPM 1 Link to comment Share on other sites More sharing options...
Yragael Posted February 13, 2018 Share Posted February 13, 2018 Still freezing. I’ll try tomorrow with another graphic card. As i have a 2300 i5 i canot use IGD. Thanks anyway. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2018 Author Share Posted February 13, 2018 Still freezing. I’ll try tomorrow with another graphic card. As i have a 2300 i5 i canot use IGD. Thanks anyway. k let me know 1 Link to comment Share on other sites More sharing options...
maxb2000 Posted February 13, 2018 Share Posted February 13, 2018 @MaLd0n I did some progress regarding DSDT patching and I patched the DSDT myself so now sleep it's working with both graphics cards (GTX 750 Ti and Intel HD Graphics). The thing is that with your DSDT I had the powernap option in the Energy saver now with my patched DSDT I don't have it. Do you have a patch for that ? Thanks ! I have attached the patched DSDT by me below so you can take a look DSDT.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2018 Author Share Posted February 13, 2018 @MaLd0n I did some progress regarding DSDT patching and I patched the DSDT myself so now sleep it's working with both graphics cards (GTX 750 Ti and Intel HD Graphics). The thing is that with your DSDT I had the powernap option in the Energy saver now with my patched DSDT I don't have it. Do you have a patch for that ? Thanks ! I have attached the patched DSDT by me below so you can take a look DSDT.zip sleep work with both, but u dont have a correct usb, etc The challenge is, put all for work correct and all staty work 1 Link to comment Share on other sites More sharing options...
KTC Posted February 13, 2018 Share Posted February 13, 2018 send me one ioreg with firewire work Ioreg and Sendme attached......... ioreg.zip Send me Xeon.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2018 Author Share Posted February 13, 2018 Ioreg and Sendme attached......... ioreg.zip Send me Xeon.zip DSDT.KTC.zip sleep work? u use sleep? check if appears correct info in pci now 2 Link to comment Share on other sites More sharing options...
dr0m1 Posted February 13, 2018 Share Posted February 13, 2018 Hi, I'm on GA-Z68MA-D2H-B3, i5-2500K HD3000 OSX 10.11.6 El Capitan UEFI Clover v.4289 with modified DSDT / SSDT files. Could you check my files and tell me if they are optimized for my configuration. I would like to know if I can install Sierra or High Sierra on my configuration. thank you in advance Send me iMac-de-Romain.lan.zip 1 Link to comment Share on other sites More sharing options...
KTC Posted February 13, 2018 Share Posted February 13, 2018 DSDT.KTC.zip sleep work? u use sleep? I tried, it goes to sleep but immediately after it turns on again check if appears correct info in pci now Firewire appears correct now 1 Link to comment Share on other sites More sharing options...
pokem Posted February 13, 2018 Share Posted February 13, 2018 couldnt find how to fix microphone there also now I got error booting and stuck in here 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 13, 2018 Author Share Posted February 13, 2018 I tried, it goes to sleep but immediately after it turns on again Firewire appears correct now try DSDT.sleep.zip couldnt find how to fix microphone there also now I got error booting and stuck in here the problem is inject kexts, try use all kexts in Library/Extensions Hi, I'm on GA-Z68MA-D2H-B3, i5-2500K HD3000 OSX 10.11.6 El Capitan UEFI Clover v.4289 with modified DSDT / SSDT files. Could you check my files and tell me if they are optimized for my configuration. I would like to know if I can install Sierra or High Sierra on my configuration. thank you in advance DSDT.aml.zip 2 Link to comment Share on other sites More sharing options...
dr0m1 Posted February 13, 2018 Share Posted February 13, 2018 I can not open the file dsdt.aml with maciASL? 1 Link to comment Share on other sites More sharing options...
Recommended Posts