MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 it is another one, am having trouble with firewire (just working after restart) and audio (just have hdmi audio) ok, i'll check it, give me a 30 minutes, need eat 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 ok, i'll check it, give me a 30 minutes, need eat  Thanks a lot!!! take your time, bon appetit 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 Thanks a lot!!! take your time, bon appetit U have a essentials patch, i think the problem is other about firewire, power Hack with device connected many devices work with procedure CLOVER.zip 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 U have a essentials patch, i think the problem is other about firewire, power Hack with device connected many devices work with procedure CLOVER.zip Am gonna try that colver and report, thanks!!!! 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 Mald0n, firewire working fine now, but usb are a little weird, i have to connect and disconnect my drives a couple of time to make them work, and just have hdmi audio    here is new ioreg  https://mega.nz/#!assmEDxL!l16RS0mwz-uF-0DMuqsT6Q6jEY6e3NGp7aVUQ3sKugU 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 Mald0n, firewire working fine now, but usb are a little weird, i have to connect and disconnect my drives a couple of time to make them work, and just have hdmi audio    here is new ioreg  https://mega.nz/#!assmEDxL!l16RS0mwz-uF-0DMuqsT6Q6jEY6e3NGp7aVUQ3sKugU u need check what ur audio codec, idk CLOVER.zip 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 u need check what ur audio codec, idk CLOVER.zip alc 262 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 alc 262 try it for audio Audio.zip 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 try it for audio Audio.zip Will do!!!! thank you!!!! 1 Link to comment Share on other sites More sharing options...
kuroshe Posted January 27, 2018 Share Posted January 27, 2018 Mald0n you did it again!!! everything works!!!! Thank you very much, have a great weekend!!!!! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 27, 2018 Author Share Posted January 27, 2018 Welcome, Enjoy! 1 Link to comment Share on other sites More sharing options...
maxb2000 Posted January 28, 2018 Share Posted January 28, 2018 Hi,  Can you fix the sleep with iGPU + dedicated GPU ?  If I disable the iGPU the system wakes up from the sleep but if I don't disable it then doesn't wake up (No Signal via dedicated GPU). I use iGPU for Final Cut Pro.  Here is the link to the EFI folder:  https://drive.google.com/open?id=1SUWy3hXWCoI4BZU8a9ZKjuRklpWO7SOx  IOREG:  https://drive.google.com/open?id=1LL1GUnv_FqTOqenNYt8zsKJy-OrfBH-P 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 28, 2018 Author Share Posted January 28, 2018 Hi,  Can you fix the sleep with iGPU + dedicated GPU ?  If I disable the iGPU the system wakes up from the sleep but if I don't disable it then doesn't wake up (No Signal via dedicated GPU). I use iGPU for Final Cut Pro.  Here is the link to the EFI folder:  https://drive.google.com/open?id=1SUWy3hXWCoI4BZU8a9ZKjuRklpWO7SOx  IOREG:  https://drive.google.com/open?id=1LL1GUnv_FqTOqenNYt8zsKJy-OrfBH-P all is ok, maxb2000, i think the problem is IntelHDGraphics, many models have problems with sleep, need a tests 1 Link to comment Share on other sites More sharing options...
maxb2000 Posted January 28, 2018 Share Posted January 28, 2018 all is ok, maxb2000, i think the problem is IntelHDGraphics, many models have problems with sleep, need a tests  Okay, thanks ! At least now I am 100 % sure what the problem is. I will try to fix it somehow. If I find a solution I will post it here.  I deleted the disablegfxfirmware from the boot arguments and added darkwake=1 (this I think enable Power Nap) and now the system sleeps and wake up perfectly. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 28, 2018 Author Share Posted January 28, 2018 Okay, thanks ! At least now I am 100 % sure what the problem is. I will try to fix it somehow. If I find a solution I will post it here. Â I deleted the disablegfxfirmware from the boot arguments and added darkwake=1 (this I think enable Power Nap) and now the system sleeps and wake up perfectly. Good!!! 1 Link to comment Share on other sites More sharing options...
caes95 Posted January 28, 2018 Share Posted January 28, 2018 Hey MaLd0n,  Please, can you help me again with a DSDT?, because after a clean install my previous one doesn't work anymore and my system doesn't reboot and get stuck on a black screen, everything else works fine.  Specs  -macOS Sierra 10.12.6 -Gigabyte H110M-H (Bios F20) -Intel i7 6700 -8GB Single slot, Kingston DDR4-2400 -Kingston SSD -Only using HD 530 igpu   iMac de Carlos.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 28, 2018 Author Share Posted January 28, 2018 Hey MaLd0n,  Please, can you help me again with a DSDT?, because after a clean install my previous one doesn't work anymore and my system doesn't reboot and get stuck on a black screen, everything else works fine.  Specs  -macOS Sierra 10.12.6 -Gigabyte H110M-H (Bios F20) -Intel i7 6700 -8GB Single slot, Kingston DDR4-2400 -Kingston SSD -Only using HD 530 igpu   iMac de Carlos.zip CLOVER.zip 2 Link to comment Share on other sites More sharing options...
caes95 Posted January 28, 2018 Share Posted January 28, 2018 CLOVER.zip With your clover folder the cpu goes to 20% load while playing 4k videos and I get stuttering in some scenes, if I go back to my previous folder the cpu keep under 5%, whats going here? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 28, 2018 Author Share Posted January 28, 2018 With your clover folder the cpu goes to 20% load while playing 4k videos and I get stuttering in some scenes, if I go back to my previous folder the cpu keep under 5%, whats going here? with previous file u dont have native PM now u have 2 Link to comment Share on other sites More sharing options...
caes95 Posted January 28, 2018 Share Posted January 28, 2018 (edited) with previous file u dont have native PM MaLd0n 2018-01-28 às 21.27.52.png now u have ohh good ty, so the stuttering while playing 4k is gpu related? I think that with cpu pm it should work well too, any thoughts?. Reboot doesn't work yet and idk why, each time I try to reboot it goes to black screen and I need to force with the reset btn (now I need to repair the disk for mount my EFI part again lol). Edited January 29, 2018 by caes95 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2018 Author Share Posted January 29, 2018 ohh good ty, so the stuttering while playing 4k is gpu related? I think that with cpu pm it should work well too, any thoughts?. Reboot doesn't work yet and idk why, each time I try to reboot it goes to black screen and I need to force with the reset btn (now I need to repair the disk for mount my EFI part again lol). Try it for reboot replace config.plist config.plist.zip 2 Link to comment Share on other sites More sharing options...
caes95 Posted January 29, 2018 Share Posted January 29, 2018 Try it for reboot replace config.plist config.plist.zip same result with reboot, still not working. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2018 Author Share Posted January 29, 2018 same result with reboot, still not working. try with default FACP values config.plist.zip 2 Link to comment Share on other sites More sharing options...
caes95 Posted January 29, 2018 Share Posted January 29, 2018 try with default FACP values config.plist.zip Still doesn't work ? , any thing that I can do for debug this problem? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 29, 2018 Author Share Posted January 29, 2018 shutdown work? the problem is only restart? 2 Link to comment Share on other sites More sharing options...
Recommended Posts