MaLd0n Posted December 15, 2017 Author Share Posted December 15, 2017 Here you go: https://www.dropbox.com/s/q6nx140sznr0fxh/clover.zip?dl=0 try CLOVER.zip check PM after reboot, if Clover dont generate a good one, use ssdt ok i attached the new ioreg and screen caps what dpcimanager showed in the pci list. ur USB3 not intel, u have a usb3 texas Intruments and ASMEDIA too, into device PEX1 and PEX2 U need try a UsbGeneric kext Check xuzhin.zip Use new DSDT, check in config.plist Generate P and C States Sorry Still the same problem as before, snake man sorry, i dont remember, many ppl every day Link to comment Share on other sites More sharing options...
snakeman Posted December 15, 2017 Share Posted December 15, 2017 Kind Sir I really need your help I have a intel 945GCNL I know its old but I want to use it as media center with mini4.1 in the end. but all it does is crash. I finally have it installed via my optiplex 760M/T but as soon as I place it in the intel Box it crashes at take a look at the pic. This motherboard does not have ache so I added ataport ache etc kexts to the other folder which does not help. Some have had success with optiplex 745 no ache also but mine keeps crashing I think I'm missing a plugin or edit it does not like my smbios 10,1 either, Help, sonicman66 Kind Sir I really need your help I have a intel 945GCNL I know its old but I want to use it as media center with mini4.1 in the end. but all it does is crash. I finally have it installed via my optiplex 760M/T but as soon as I place it in the intel Box it crashes at take a look at the pic. This motherboard does not have ache so I added ataport ache etc kexts to the other folder which does not help. Some have had success with optiplex 745 no ache also but mine keeps crashing I think I'm missing a plugin or edit it does not like my smbios 10,1 either, Help, sonicman66 Did not work either, snakeman Link to comment Share on other sites More sharing options...
xuzhin Posted December 15, 2017 Share Posted December 15, 2017 try CLOVER.zip check PM after reboot, if Clover dont generate a good one, use ssdt ur USB3 not intel, u have a usb3 texas Intruments and ASMEDIA too, into device PEX1 and PEX2 U need try a UsbGeneric kext Check xuzhin.zip Use new DSDT, check in config.plist Generate P and C States sorry, i dont remember, many ppl every day thanks i'll look for the kexts. but how do i generate p and c states? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 15, 2017 Author Share Posted December 15, 2017 thanks i'll look for the kexts. but how do i generate p and c states? here if dont generate good PM use ssdt Run it SSDT_Automator.zip Lan work? Link to comment Share on other sites More sharing options...
xuzhin Posted December 15, 2017 Share Posted December 15, 2017 here Captura de Tela 2017-12-15 às 16.40.37.png if dont generate good PM use ssdt Run it SSDT_Automator.zip Lan work? havent restarted yet, but i replaced the dsdt file with the new one and placed the kext in my kext others folder. attached is the power management folder that was created. oh and generate c and p states was already checked according to clover cofigurator. i have to run meet some friends now, will let you know tomorrow if this fixed usb3 and lan, thanks for investing so much time in helping me. Power_Management.zip 1 Link to comment Share on other sites More sharing options...
Loloflat6 Posted December 15, 2017 Share Posted December 15, 2017 ur processaor have 8 core, use voodootscsync = 7 try Loloflat6 CLOVER.zip Thank's , works fine : I can watch Primevideo with HDMi on my 4K TV : nice job. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 15, 2017 Author Share Posted December 15, 2017 havent restarted yet, but i replaced the dsdt file with the new one and placed the kext in my kext others folder. attached is the power management folder that was created. oh and generate c and p states was already checked according to clover cofigurator. i have to run meet some friends now, will let you know tomorrow if this fixed usb3 and lan, thanks for investing so much time in helping me. pout ssdt.aml in same folder with dsdt clover/acpi/patched Thank's , works fine : I can watch Primevideo with HDMi on my 4K TV : nice job. Link to comment Share on other sites More sharing options...
Elfmann Posted December 16, 2017 Share Posted December 16, 2017 post ur full clover folder here, remove serials, shutdown is done, the problem is other put in Clover/Acpi/Patched, reboot and send me new ioreg ok, here is the new ioreg file. Is it ok? https://www.dropbox.com/s/5fadh3orhekvd7x/Send%20me%20Cristian%E2%80%99s%20Mac%20Pro.zip?dl=0 Thanks you 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 16, 2017 Author Share Posted December 16, 2017 ok, here is the new ioreg file. Is it ok? https://www.dropbox.com/s/5fadh3orhekvd7x/Send%20me%20Cristian%E2%80%99s%20Mac%20Pro.zip?dl=0 Thanks you extract ioreg using it IORegistryExplorer.app.zip 1 Link to comment Share on other sites More sharing options...
Elfmann Posted December 17, 2017 Share Posted December 17, 2017 extract ioreg using it IORegistryExplorer.app.zip ok, here it is:https://www.dropbox.com/s/qdu2e39zqhfk3td/Cristian%E2%80%99s%20Mac%20Pro%20ioreg.ioreg?dl=0 I've extracted it through File -> Save as . Is it right? Thanks you 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 17, 2017 Author Share Posted December 17, 2017 ok, here it is:https://www.dropbox.com/s/qdu2e39zqhfk3td/Cristian%E2%80%99s%20Mac%20Pro%20ioreg.ioreg?dl=0 I've extracted it through File -> Save as . Is it right? Thanks you look good run geekbench and check ur score try it for check frequencies, etc Intel® Power Gadget SIERRA.zip Link to comment Share on other sites More sharing options...
Elfmann Posted December 17, 2017 Share Posted December 17, 2017 look good run geekbench and check ur score try it for check frequencies, etc Intel® Power Gadget SIERRA.zip Awesome, thanks you for all. Ran the tools, and everything looks good, but I've noticed that the cpu frequency I always at the max(3,7 GHz), is it normal? Thanks you again. Link to comment Share on other sites More sharing options...
MaLd0n Posted December 17, 2017 Author Share Posted December 17, 2017 Awesome, thanks you for all. Ran the tools, and everything looks good, but I've noticed that the cpu frequency I always at the max(3,7 GHz), is it normal? Thanks you again. NoUse Ssdt for ur processor and native PM Link to comment Share on other sites More sharing options...
Elfmann Posted December 17, 2017 Share Posted December 17, 2017 No Use Ssdt for ur processor and native PM Are you good even with the ssdt as u are with dsdt? Anyway, with the patch fo the cpu and the PM cannot be done even with the dsdt? Or am I wrong. Thanks you Link to comment Share on other sites More sharing options...
MaLd0n Posted December 17, 2017 Author Share Posted December 17, 2017 use ssdt only for cpu PM use my DSDT + SSDT Pike run it and put ssdt.aml in same folder, Clover/Acpi/patched SSDT_Automator.zip Link to comment Share on other sites More sharing options...
Elfmann Posted December 18, 2017 Share Posted December 18, 2017 use ssdt only for cpu PM use my DSDT + SSDT Pike run it and put ssdt.aml in same folder, Clover/Acpi/patched SSDT_Automator.zip Awesome, thank you, will try. But could your ssdt work for my cpu? Does a wrong patched DSTS ot SSDT could harm my pc hw components? Thanks you Link to comment Share on other sites More sharing options...
MaLd0n Posted December 18, 2017 Author Share Posted December 18, 2017 Awesome, thank you, will try. But could your ssdt work for my cpu? Does a wrong patched DSTS ot SSDT could harm my pc hw components? Thanks you No problem if u have correct patches and SSDT by Pike Link to comment Share on other sites More sharing options...
pico joe Posted December 18, 2017 Share Posted December 18, 2017 Hi MaLd0n Honestly .. I want your magic finger to touch my Hackintosh Hope I can learn something, please see this pico's-MP61.zip pico 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 18, 2017 Author Share Posted December 18, 2017 Hi MaLd0n Honestly .. I want your magic finger to touch my Hackintosh Hope I can learn something, please see this pico's-MP61.zip pico Hey, Pico DSDT.pico joe.zip 1 Link to comment Share on other sites More sharing options...
Elfmann Posted December 18, 2017 Share Posted December 18, 2017 No problem if u have correct patches and SSDT by Pike ok, I've created the SSDT with the Automator and put it in the Clover -> ACPI -> Patched, but when I check the frequency, it still remain at the max freq (3,7 GHz). Any advice? Below there is the ssdt.aml file, if you can give it a look, or just give me some advice on how to correct it. https://www.dropbox.com/s/jv45eu19woluz69/SSDT.aml?dl=0 Thank you Link to comment Share on other sites More sharing options...
MaLd0n Posted December 18, 2017 Author Share Posted December 18, 2017 u use Yosemite? Link to comment Share on other sites More sharing options...
Elfmann Posted December 18, 2017 Share Posted December 18, 2017 u use Yosemite? yes, I've told you that I successfully installed Yosemite instead of Sierra. When I first asked you if you could create for me a patched DSDT even if I use Yosemite, if you remember. I know this is the wrong thread, but what do you say about the SSDT file? P.S. I've also finally successfully installed Sierra 10.12.6 on my system, but this is another story, and I'm still having some problem on it with the usb ports. Anyway, I think I'll stay on Yosemite for a while. Thanks you 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 18, 2017 Author Share Posted December 18, 2017 u need check Guide for nativePM in ur processor, i think have a good guide here in forum for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problem Link to comment Share on other sites More sharing options...
Elfmann Posted December 18, 2017 Share Posted December 18, 2017 u need check Guide for nativePM in ur processor, i think have a good guide here in forumok, I'll check it out. Hope there is something useful. for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problemAlready tried with the usbinjectall, still have to try with patched dsdt. Anyway It's strange, bevause my only onboard usb3 work, the others port( all 2.0 ) doesn't work Anyway, we'll see what will come out. Thanks you 1 Link to comment Share on other sites More sharing options...
Elfmann Posted December 18, 2017 Share Posted December 18, 2017 u need check Guide for nativePM in ur processor, i think have a good guide here in forum for sierra u can use dsdt + usbinjectall, but ur usb3 is not intel, if dont work with genericusb kext...is a problem Sorry man, I have one more question. When I generate the ssdt.aml file with the automator, the is one string that tell: "Warning: 'system-type' may be set improperly (1 instead of 3)". What does it mean, how can I swith my 'system-type' from 1 to 3. Maybe this is the problem why the file didn't worked. What do you think? Thanks you 1 Link to comment Share on other sites More sharing options...
Recommended Posts