vinhkm6 Posted November 30, 2017 Share Posted November 30, 2017 try CLOVER.zip test it DSDT.aml.zip Hi MaLd0n Tks you very much I test your file sent to me Problem is The monitor has no signal but the hard drive light is on My computer have 2 usb 2.0 and 1 usb 3.0 (asmedia) I connect usb, mouse ....to port usb 3.0 but no signal I think this problem is usb asmedia This is ioreg https://app.box.com/s/pps3db23hlqddlu78uio0kp5li8og8qu Link to comment Share on other sites More sharing options...
MaLd0n Posted November 30, 2017 Author Share Posted November 30, 2017 the notebook not a full shutdown? 2 Link to comment Share on other sites More sharing options...
vinhkm6 Posted November 30, 2017 Share Posted November 30, 2017 the notebook not a full shutdown? yes Link to comment Share on other sites More sharing options...
xuzhin Posted December 7, 2017 Share Posted December 7, 2017 If you need a full patched DSDT... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) and tell me what your hardware! My system: Mobo: AsRock x79 Extreme 6 (P2.50) CPU: i7-4930K @ 3.40ghz Graphics: nvidea GeForce gtx 770 i created a bootstick with the help of your guide, and after that didn't work with pavo's guide. i get the same result with both options, here, when i try booting without the usb stick, all i see is: reboot and select proper boot device i've tried with, the stock config file, with your post clover folder, with 2 or 3 i could find in this thread to be exact, but all with no luck. where did i go wrong? Link to comment Share on other sites More sharing options...
drphilth Posted December 7, 2017 Share Posted December 7, 2017 put ur nvidia, install web driver CLOVER.zip Many thanks again - Nearly working! Had a small delay because my NVIDIA card had to be RMAd... I have 3 small problems. The keyboard and mouse don't work on the clover screen. When the computer tries to sleep, it gets as far as power down and then immediately starts again When I boot into OSX, for some reason my RAM profile in the BIOS resets to a slower speed. Any idea how I can solve these? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 7, 2017 Author Share Posted December 7, 2017 Many thanks again - Nearly working! Had a small delay because my NVIDIA card had to be RMAd... I have 3 small problems. The keyboard and mouse don't work on the clover screen. When the computer tries to sleep, it gets as far as power down and then immediately starts again When I boot into OSX, for some reason my RAM profile in the BIOS resets to a slower speed. Any idea how I can solve these? try DSDT.aml.zip My system: Mobo: AsRock x79 Extreme 6 (P2.50) CPU: i7-4930K @ 3.40ghz Graphics: nvidea GeForce gtx 770 i created a bootstick with the help of your guide, and after that didn't work with pavo's guide. i get the same result with both options, here, when i try booting without the usb stick, all i see is: reboot and select proper boot device i've tried with, the stock config file, with your post clover folder, with 2 or 3 i could find in this thread to be exact, but all with no luck. where did i go wrong? use boot key, asus is f8, gigabyte is f12, etc 1 Link to comment Share on other sites More sharing options...
xuzhin Posted December 7, 2017 Share Posted December 7, 2017 it's f11 for me, but that's what i get when i try to boot from the disk that i installed everything on. when i try to boot from the disk called mac os x (which i think is the efi drive) nothing happens, the boot screen just refreshes. Link to comment Share on other sites More sharing options...
MaLd0n Posted December 7, 2017 Author Share Posted December 7, 2017 post a pohto or movie 1 Link to comment Share on other sites More sharing options...
xuzhin Posted December 7, 2017 Share Posted December 7, 2017 here View My Video http://tinypic.com/r/2ilbpg5/9 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 7, 2017 Author Share Posted December 7, 2017 here View My Video http://tinypic.com/r/2ilbpg5/9 what options u install clover in usb stick? 1 Link to comment Share on other sites More sharing options...
xuzhin Posted December 7, 2017 Share Posted December 7, 2017 what options u install clover in usb stick? i used: install for uefi booting only install clover in the esp bootloader: don't update mbr and pbr sectors themes (i guess what was set by default) drivers64uefi: osxaptiofix2drv-64 i used clover configurator to add npci=0x2000, and nv_disable=1 and nvda_drv=1 i guess. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 7, 2017 Author Share Posted December 7, 2017 -create a new usb stick -Install clover with options Clover_v2.4k_r4334.pkg.zip -replace full clover folder CLOVER.zip Link to comment Share on other sites More sharing options...
xuzhin Posted December 8, 2017 Share Posted December 8, 2017 -create a new usb stick -Install clover with options 01.png 02.png Clover_v2.4k_r4334.pkg.zip -replace full clover folder CLOVER.zip the boot stick works, but i'll do that. and should i use those settings for the hard drive as well, when i clover it? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 8, 2017 Author Share Posted December 8, 2017 the boot stick works, but i'll do that. and should i use those settings for the hard drive as well, when i clover it? ye Link to comment Share on other sites More sharing options...
MaLd0n Posted December 9, 2017 Author Share Posted December 9, 2017 Update first post -High Sierra -Update Clover folder 1 Link to comment Share on other sites More sharing options...
xuzhin Posted December 9, 2017 Share Posted December 9, 2017 Mald0n thank you so much. you are a freaking blessing to this scene. i asked at the tmx forums, nobody could really help me. i asked here in the chat, and they tried a lot of different things with me, but none of them got it working. you made it happen though. thank you, stay blessed, and enjoy the holidays. merry christmas. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 9, 2017 Author Share Posted December 9, 2017 Mald0n thank you so much. you are a freaking blessing to this scene. i asked at the tmx forums, nobody could really help me. i asked here in the chat, and they tried a lot of different things with me, but none of them got it working. you made it happen though. thank you, stay blessed, and enjoy the holidays. merry christmas. fine tune done? send me dsdt, need some patches 1 Link to comment Share on other sites More sharing options...
caes95 Posted December 10, 2017 Share Posted December 10, 2017 Hi Maldon, I'm need help with Sierra on asus h61m-k Using your clover folder,no changes made. Specs: igpu hd 2500, i5 3330, 4gb ram BIOS config: - csm disabled - hpet enabled - Intel speedstep disabled - sata ahci mode - USB 2.0 ehci enabled - legacy USB support enabled - EHCI Hand-off enabled - fastboot disabled Thanks you Link to comment Share on other sites More sharing options...
MaLd0n Posted December 10, 2017 Author Share Posted December 10, 2017 What Clover version u use? Link to comment Share on other sites More sharing options...
Elfmann Posted December 10, 2017 Share Posted December 10, 2017 Hi all guys, I have a problem booting the installation from the bootable usb. I always get a KP about 'System uptime in nanoseconds ...'. My desktop hw specs are the following: CPU: i7 4820k GPU: gtx 760 MOBO: OEM Can you give me some advice on how to make work at least the bootable usb . P.S. I would attach the image of the error, but there is no attaching option directly from the pc for me. If you want I can host it somewhere and give you the link, just tell me how it would be better for you. If you need any other info, just tell me, maybe the config.plist file or anything that could help. Thanks you Link to comment Share on other sites More sharing options...
MaLd0n Posted December 10, 2017 Author Share Posted December 10, 2017 Hi all guys, I have a problem booting the installation from the bootable usb. I always get a KP about 'System uptime in nanoseconds ...'. My desktop hw specs are the following: CPU: i7 4820k GPU: gtx 760 MOBO: OEM Can you give me some advice on how to make work at least the bootable usb . P.S. I would attach the image of the error, but there is no attaching option directly from the pc for me. If you want I can host it somewhere and give you the link, just tell me how it would be better for you. If you need any other info, just tell me, maybe the config.plist file or anything that could help. Thanks you Post photo Link to comment Share on other sites More sharing options...
Elfmann Posted December 10, 2017 Share Posted December 10, 2017 Post photo ok, here is the image of the error. https://www.dropbox.com/s/rcbgsfsejx7t8zj/IMG_20171210_124043_HDR.jpg?dl=0 Thanks you 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 10, 2017 Author Share Posted December 10, 2017 ok, here is the image of the error. https://www.dropbox.com/s/rcbgsfsejx7t8zj/IMG_20171210_124043_HDR.jpg?dl=0 Thanks you NullCPUPowerManagement.kext.zip after install need edit ur DSDT Link to comment Share on other sites More sharing options...
caes95 Posted December 10, 2017 Share Posted December 10, 2017 What Clover version u use? I'm using release 4200 1 Link to comment Share on other sites More sharing options...
Elfmann Posted December 10, 2017 Share Posted December 10, 2017 NullCPUPowerManagement.kext.zip after install need edit ur DSDT Ok, I've put the nullcpu kext in the Clover -> Other folder. Now how can I edit my DSDT, I never was able to compile and edit how can I do it, which option should I change? Thanks you. 1 Link to comment Share on other sites More sharing options...
Recommended Posts