MaLd0n Posted May 23, 2017 Author Share Posted May 23, 2017 hdas to hdef into device name_adr 0x001F0003 set_label begin HDEF end; into_all all code_regex HDAS replaceall_matched begin HDEF end hdef into method label _DSM parent_adr 0x001F0003 remove_entry; into device name_adr 0x001F0003 insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "AAPL,slot-name", "Built In",\n "name", "Realtek Audio Controller",\n "model", Buffer () {"Realtek ALCxxx Audio Controller"},\n "device_type", Buffer () {"Audio Controller"},\n "layout-id", Buffer () {0x01, 0x00, 0x00, 0x00}, \n "MaximumBootBeepVolume", Buffer () {0x01}, \n "PinConfigurations", Buffer () {},\n "hda-gfx", Buffer () {"onboard-1"}\n })\n }\n end 2 Link to comment Share on other sites More sharing options...
nikketrikke Posted May 23, 2017 Share Posted May 23, 2017 -Replace full folder CLOVER.zip -Update Clover http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=240174 -Reboot thanks will try 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 23, 2017 Author Share Posted May 23, 2017 use new clover Clover_v2.4k_r4077.pkg.zip 1 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 27, 2017 Share Posted May 27, 2017 Hi @MaLd0n I uploaded all my files. Can you patch for me ?My computer is:Cpu: Skylake i7-6700kMainboard: Gigabyte gaming G7 z170x Vga: AMD R9380 Sorry, my english is limited. michaelanhvu.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 27, 2017 Author Share Posted May 27, 2017 Post ur full clover folder too 1 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 27, 2017 Share Posted May 27, 2017 Post ur full clover folder too Sorry, here is my clover ( usb ) EFI.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 27, 2017 Author Share Posted May 27, 2017 Sorry, here is my clover ( usb ) CLOVER.zip 2 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 27, 2017 Share Posted May 27, 2017 CLOVER.zip It can boot to bootscreen and setup ( with AMD R9380 card ) . But can't see my ssd and hdd on Disk Utility for Erease. Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 27, 2017 Share Posted May 27, 2017 Hi MaLd0n, what's up man? It can boot to bootscreen and setup ( with AMD R9380 card ) . But can't see my ssd and hdd on Disk Utility for Erease. Remove "change SAT0 to SATA" from DSDT patches. and try again. config.plist.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 27, 2017 Author Share Posted May 27, 2017 #update first post# Clover Installation and Post Installation Hi MaLd0n, what's up man? Very fine, bro! Welcome here! 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 27, 2017 Share Posted May 27, 2017 Thanks a lot man It's good to be here 1 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 28, 2017 Share Posted May 28, 2017 It's still same problem here. Can't see any SSD and HDD to install. What's that ? 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 28, 2017 Share Posted May 28, 2017 It's still same problem here. Can't see any SSD and HDD to install. What's that ? If you boot with your previous EFI folder you can see the internal hard disks? I tested the EFI folder MaLd0n posted in post #207, whiteout the DSDT.aml file of course because I'm using a different mobo and everything is working ok. If you can boot into macOS Sierra installer with you previous EFI folder or with MaLd0n's EFI folder without the DSDT.aml file and be able to see all the internal HDDs we'll there might be a problem with the DSDT.aml file. Make sure you have SATA configuration set to AHCI in BIOS. I also attached a folder which is exactly the same folder as MaLd0n posted except for the DSDT.aml file which is different. Give it a try. athackintoshat.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 28, 2017 Author Share Posted May 28, 2017 in installation dont use DSDT.aml, only in post installation installation use only basic to up to installer u can try a vboxhfs intead hfsplus driver too 2 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 28, 2017 Share Posted May 28, 2017 If you boot with your previous EFI folder you can see the internal hard disks? I tested the EFI folder MaLd0n posted in post #207, whiteout the DSDT.aml file of course because I'm using a different mobo and everything is working ok. If you can boot into macOS Sierra installer with you previous EFI folder or with MaLd0n's EFI folder without the DSDT.aml file and be able to see all the internal HDDs we'll there might be a problem with the DSDT.aml file. Make sure you have SATA configuration set to AHCI in BIOS. I also attached a folder which is exactly the same folder as MaLd0n posted except for the DSDT.aml file which is different. Give it a try. I changed to this CLOVER and installed OK. in installation dont use DSDT.aml, only in post installation installation use only basic to up to installer u can try a vboxhfs intead hfsplus driver too Can i changed DSDT.aml ( MaLd0n ) and DSDT.aml ( cyberdevs ) when i in clover ? Because i installed macOS with DSDT.aml of cyberdevs. I don't know how to use DSDT.aml of MaLd0n. Sorry for bad english. Hope you understand what i say. 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 28, 2017 Author Share Posted May 28, 2017 i think the files is same run it and send me file RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
@hackintosh@ Posted May 28, 2017 Share Posted May 28, 2017 i think the files is same run it and send me file RunMe.app.zip Here is my file Send me Trần’s iMac.zip Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 28, 2017 Share Posted May 28, 2017 I changed to this CLOVER and installed OK. Can i changed DSDT.aml ( MaLd0n ) and DSDT.aml ( cyberdevs ) when i in clover ? Because i installed macOS with DSDT.aml of cyberdevs. I don't know how to use DSDT.aml of MaLd0n. Sorry for bad english. Hope you understand what i say. We understand what you me, don't worry about it You can simply replace or rename the DSDT file I gave you to Dev'sDSDT.aml and use the one that MaLd0n has posted earlier. you can have them both inside the /EFI/Cover/ACPI/patched folder but the one which is called "DSDT.aml" will be loaded. so you can test them both, but not at the same time. Link to comment Share on other sites More sharing options...
MaLd0n Posted May 28, 2017 Author Share Posted May 28, 2017 Have a good patches, but same mobo? 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 28, 2017 Share Posted May 28, 2017 Have a good patches, but same mobo? Actually I have a GA-Z170X - Gaming 5 and @Hackintosh@ has a GA-Z170X - Gaming 7. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 28, 2017 Author Share Posted May 28, 2017 not a good idea the best is, update to last bios and edit, but same model and same bios version is a good idea 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 28, 2017 Share Posted May 28, 2017 Well actually the DSDT file I gave him is not for my mobo, it's for the same Z170X - Gaming 7 otherwise I wouldn't give to him. I'm still using the same DSDT you kindly patched for me and I'm thankful for that 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 28, 2017 Author Share Posted May 28, 2017 Jajajaja 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 28, 2017 Share Posted May 28, 2017 1 Link to comment Share on other sites More sharing options...
Loofah Posted May 28, 2017 Share Posted May 28, 2017 Hi, looking for help with my clover folder. I have: Mobo: Gigabyte - GA-Z170MX Processor: Intel - Core i7-6700K 4.0GHz Graphics: EVGA - GeForce GTX 1060 6GB Here is my clover folder: Sorry, here is my Clover folder. EFI.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts