MaLd0n Posted May 13, 2017 Author Share Posted May 13, 2017 I finally figured out what was causing my machine to wake directly after putting it to sleep. It was my Corsair H100i link connection. The CPU AIO cooler has a connection to the board via USB for Corsair link software to monitor temp in windows. I found a few more people having the same issue. And low and behold they were correct. Unhook the usb connection from the cooler and sleep works normal again. Cooler still works normal in OSX since theres no option for the software in OSX environment. Either way all is working flawless now. Thank you again for your time and help. Very good, bro! 1 Link to comment Share on other sites More sharing options...
appunu Posted May 13, 2017 Share Posted May 13, 2017 Thans a lot mald0n. darkwake=1 works fine for now. I put the system to sleep and after three hours seems like working good. If something happens I will try out the solution suggested by tikizonda94. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2017 Author Share Posted May 13, 2017 ofc need a test Always has a solution 1 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 13, 2017 Share Posted May 13, 2017 Im noticing after sleep im loosing audio. Any ideas? 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 13, 2017 Share Posted May 13, 2017 Im noticing after sleep im loosing audio. Any ideas? You need to set darkwake=8 and install CodecCommander.ket inside S/L/E. In my computer CodecCommander.kext v. 2.4.0 works I had no luck with any other version. 3 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 13, 2017 Share Posted May 13, 2017 You need to set darkwake=8 and install CodecCommander.ket inside S/L/E. In my computer CodecCommander.kext v. 2.4.0 works I had no luck with any other version. CodexCommander did the trick 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 13, 2017 Share Posted May 13, 2017 CodexCommander did the trick Nice! Have you tried SlpSmiAtwake to fix your sleep issue? You don't need to unplug the link to get the sleep to work. or generating the custom SSDT might help solve the problem as Savage_AUS recommended. 2 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 13, 2017 Share Posted May 13, 2017 Nice! Have you tried SlpSmiAtwake to fix your sleep issue? You don't need to unplug the link to get the sleep to work. or generating the custom SSDT might help solve the problem as Savage_AUS recommended. What are you using to generate a custom SSDT for USB? 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted May 13, 2017 Share Posted May 13, 2017 See the following topic http://www.insanelymac.com/forum/topic/322811-ssdtgen-custom-generated-ssdts-x99z170z97h97-systems/page-7?hl=%2Bssdt+%2Bgen&do=findComment&comment=2407976 EDIT: He closed his topic and removed his files and support. see the following Page: https://github.com/Piker-Alpha/ssdtPRGen.sh 1 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 13, 2017 Share Posted May 13, 2017 Ive been following his page before he closed it. I tried the SSDT-SBUS.aml method. I ended up loosing USB 3.0 speeds. Ports still worked but were at 2.0 speeds. Im sure i was doing something wrong. Once removing the Patched aml file my speeds went back to normal. I use pikes ssdt method for my cpu overclock and it works flawless on the Powermanagement side. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 13, 2017 Author Share Posted May 13, 2017 Ive been following his page before he closed it. I tried the SSDT-SBUS.aml method. I ended up loosing USB 3.0 speeds. Ports still worked but were at 2.0 speeds. Im sure i was doing something wrong. Once removing the Patched aml file my speeds went back to normal. I use pikes ssdt method for my cpu overclock and it works flawless on the Powermanagement side. u dont need nothing more, all in ur DSDT, u need a SSDT for USB, only Check here https://github.com/RehabMan/OS-X-USB-Inject-All 2 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 13, 2017 Share Posted May 13, 2017 u dont need nothing more, all in ur DSDT, u need a SSDT for USB, only Check here https://github.com/RehabMan/OS-X-USB-Inject-All Working flawless for me. I trust you 1 Link to comment Share on other sites More sharing options...
tikizondo94 Posted May 14, 2017 Share Posted May 14, 2017 Just a random question.. which smbios seems to be the best to run for a setup like mine? Ive used imac 14.2 and macpro 5.1. Both give off about the same benchmark results. But i get better sleep options in system preferences with a macpro 5.1. Which should i use? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 14, 2017 Author Share Posted May 14, 2017 iMac14,2 2 Link to comment Share on other sites More sharing options...
shakhri24 Posted May 15, 2017 Share Posted May 15, 2017 after 4 day with new clover folder every thing seems good and smooth but I have a problem with sleep. I disabled sleep in system preferences but laptop automatically goes to sleep after 2 min of inactivity and after wake from sleep cpu work abnormal (according to intel power widget) and after a while system will restart. CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 15, 2017 Author Share Posted May 15, 2017 try with Pike SSDT run it ssdtPRGen.command.zip 2 Link to comment Share on other sites More sharing options...
shakhri24 Posted May 15, 2017 Share Posted May 15, 2017 try with Pike SSDT run it ssdtPRGen.command.zip With Pike SSDT Auto sleep fixed but high cpu frequency after wake not Sent from my Xperia SP using Tapatalk 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 15, 2017 Author Share Posted May 15, 2017 try drop SSDTs about PM About PM u need post for Pike or Clover team 2 Link to comment Share on other sites More sharing options...
shakhri24 Posted May 15, 2017 Share Posted May 15, 2017 try drop SSDTs about PM MaLd0n 2017-05-15 às 13.03.58.png About PM u need post for Pike or Clover team I added these lines to clover config, now which file, folder or log needs for report to Pike? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 15, 2017 Author Share Posted May 15, 2017 Talk about your problem to him 2 Link to comment Share on other sites More sharing options...
shakhri24 Posted May 15, 2017 Share Posted May 15, 2017 Talk about your problem to him ok bro, thanks for your helps and guides 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 15, 2017 Author Share Posted May 15, 2017 Welcome! Good Luck! 2 Link to comment Share on other sites More sharing options...
Donw35 Posted May 16, 2017 Share Posted May 16, 2017 per our conversation Send me Big Mac.zip CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 16, 2017 Author Share Posted May 16, 2017 per our conversation -Update Clover Clover_v2.4k_r4076.pkg.zip -Replace folder CLOVER.zip -Run Olarila.command Olarila.command.zip -Reboot send me ioreg after reboot IORegistryExplorer.app.zip Link to comment Share on other sites More sharing options...
Donw35 Posted May 16, 2017 Share Posted May 16, 2017 No boot, sound assertion and 0 crossed out, thinking bios settings ... any ideas ? 1 Link to comment Share on other sites More sharing options...
Recommended Posts