Ciro82 Posted July 31, 2017 Share Posted July 31, 2017 I really hope in a new Kernel for 10.12.6 from @Bronya It would solve all the issue with Polaris for Ryzen users... 1 Link to comment Share on other sites More sharing options...
Gigamaxx Posted July 31, 2017 Share Posted July 31, 2017 I hope you are wrong about this, it would not be correct for the communityI am only using the Bronya 16.5 auto kernel, I did run -s on first boot to rebuild kernel caches, but it is the same one I posted in my thread for installation, in fact I downloaded it from there after reloading a fresh install of Sierra 12.5 form USB. I really hope in a new Kernel for 10.12.6 from @Bronya It would solve all the issue with Polaris for Ryzen users... Yes, this needs to be done because High Sierra won't release to public for some time and we are stuck in Sierra 12.6 for awhile. The present kernel works in 12.6 but seems a little buggy. It too bad, because 12.6 has good support for Polaris and Fury cards but the kernel doesn't want to load the lilukext correctly and allow dedicated graphics. Link to comment Share on other sites More sharing options...
carlo_67 Posted July 31, 2017 Share Posted July 31, 2017 guys me and my friend with the ryzen hackintosh and the rx 480 where able to get to work the 480 without the helper card, using Lilu and WhateverGreen kexts, here is the screenshot he used the fake id and a couple of fixes You can explain it please, let's see if we can help Link to comment Share on other sites More sharing options...
Ciro82 Posted July 31, 2017 Share Posted July 31, 2017 You can explain it please, let's see if we can help it's ok Carlo, 10.12.5 requires kext modification Mistery solved Link to comment Share on other sites More sharing options...
Bronya Posted July 31, 2017 Share Posted July 31, 2017 Bronya: It detected incorrect CPU busratio=20.5 instead of correct value=20 in FX-6300 hackintosh, maybe that's the reason it freezed and can not boot to desktop. But it can boot to desktop at 10.10.5 even with the same error. At 10.9.5 it can boot to desktop, but too slow timer and very poor performance occurred again. Hi ! Please upload images chameleon with list before boot ! I want your cpu_Mult ! 1 Link to comment Share on other sites More sharing options...
Gigamaxx Posted July 31, 2017 Share Posted July 31, 2017 it's ok Carlo, 10.12.5 requires kext modification Mistery solved Yes, Sierra 12.6 doesn't need kext modification but lilu doesn't work correctly, it's sad. Link to comment Share on other sites More sharing options...
carlo_67 Posted July 31, 2017 Share Posted July 31, 2017 Try the System.kext, AppleACPIPlatform.kext, IOPCIFamily.kext 10.12.5? Link to comment Share on other sites More sharing options...
Gigamaxx Posted July 31, 2017 Share Posted July 31, 2017 Try the System.kext, AppleACPIPlatform.kext, IOPCIFamily.kext 10.12.5? Do you mean replace it from 12.5 to the 12.6 version of Sierra? That would be cool if it works. Link to comment Share on other sites More sharing options...
jsl Posted August 1, 2017 Share Posted August 1, 2017 Hi ! Please upload images chameleon with list before boot ! I want your cpu_Mult ! This rc2 boot worked for Ryzen 1700X hackintosh which can detect correct CPU parameters (1st photo), but it always got wrong CPU parameters in FX-6300 hackintosh (2nd photo). Can you fix it ? Or it can be applied to Ryzen & A10 CPUs only ? Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 This rc2 boot worked for Ryzen 1700X hackintosh which can detect correct CPU parameters (1st photo), but it always got wrong CPU parameters in FX-6300 hackintosh (2nd photo). Can you fix it ? Or it can be applied to Ryzen & A10 CPUs only ? Please check bios ! For FX-6300 Six - really current 3500 mhz ! But why 4000 Mhz ?? And Why 195Mhz ?? And check Multiplier in bios ! Thank ! This boot for all cpus ! Need test for all ! Because maybe wrong , example for Kabini this manual the wrong ... 1 Link to comment Share on other sites More sharing options...
jsl Posted August 1, 2017 Share Posted August 1, 2017 Please check bios ! For FX-6300 Six - really current 3500 mhz ! But why 4000 Mhz ?? And Why 195Mhz ?? And check Multiplier in bios ! Thank ! This boot for all cpus ! Need test for all ! Because maybe wrong , example for Kabini this manual the wrong ... BIOS setting: Overclock (200 x 20): 4.0GHz Without OC it's 3500 Mhz (200 x17.5) this rc2 boot still got the same cpu_Mult(N/2) : 20.5 in the first line before booting in FX-6300 hackintosh. 1 Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 BIOS setting: Overclock (200 x 20): 4.0GHz Without OC it's 3500 Mhz (200 x17.5) this rc2 boot still got the same cpu_Mult(N/2) : 20.5 in the first line before booting. hmm . This in bios multiplier is auto ? 1 Link to comment Share on other sites More sharing options...
jsl Posted August 1, 2017 Share Posted August 1, 2017 hmm . This in bios multiplier is auto ? No, in BIOS multiplier is MANUAL & set to 200 x 17.5(1st photo). If BIOS is all AUTO still got wrong parameters (2nd photo). Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 OK ! Thank ! Wait for fix ... 1 Link to comment Share on other sites More sharing options...
jsl Posted August 1, 2017 Share Posted August 1, 2017 OK ! Thank ! Wait for fix ... For Phenom II x6 1405T & Phenom x4 9850 it can detect correct parameters without errors, but need flag "-f" to booting. 1 Link to comment Share on other sites More sharing options...
carlo_67 Posted August 1, 2017 Share Posted August 1, 2017 Do you mean replace it from 12.5 to the 12.6 version of Sierra? That would be cool if it works. You have to try it, I do not have ryzen Link to comment Share on other sites More sharing options...
gills83 Posted August 1, 2017 Share Posted August 1, 2017 small 7900x at 1000 $ 2 Link to comment Share on other sites More sharing options...
Gigamaxx Posted August 1, 2017 Share Posted August 1, 2017 5.2 GHz! Insane, can't wait to trade up to threadripper and the (3) 3x16 pci graphics lanes. You have to try it, I do not have ryzen Tonight, I will try on 12.6 Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 Hi ! I tried in bios : I use cpu-z_msi 1) if auto multiplier : SEE : 2) if install manual multiplier of 20 : This FX is auto use multiplier .. ))) But i fixed boot chameleon ! Wait for boot chameleon and Clover !!! 2 Link to comment Share on other sites More sharing options...
gills83 Posted August 1, 2017 Share Posted August 1, 2017 5.2 GHz! Insane, can't wait to trade up to threadripper and the (3) 3x16 pci graphics lanes. Yes, azote liquid 1 Link to comment Share on other sites More sharing options...
Ciro82 Posted August 1, 2017 Share Posted August 1, 2017 Threadripper is beefy and powerful, at that price, Intel can only watch..... Inviato dal mio iPhone utilizzando Tapatalk 1 Link to comment Share on other sites More sharing options...
gills83 Posted August 1, 2017 Share Posted August 1, 2017 Hi ! I tried in bios : I use cpu-z_msi 1) if auto multiplier : SEE : cpu-z_auto.JPG 2) if install manual multiplier of 20 : cpu-z_manual.JPG This FX is auto use multiplier .. ))) But i fixed boot chameleon ! Wait for boot chameleon and Clover !!! Your FX 8350 ? Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 Your FX 8350 ? Yes 1 Link to comment Share on other sites More sharing options...
Bronya Posted August 1, 2017 Share Posted August 1, 2017 Try boot (chameleon) and kernels Mav and Yos. . boot_kernel_ryzen_rc3.zip 1 Link to comment Share on other sites More sharing options...
jsl Posted August 2, 2017 Share Posted August 2, 2017 Try boot (chameleon) and kernels Mav and Yos. . boot_kernel_ryzen_rc3.zip Thanks for this rc3 boot file which still got wrong parameter if BIOS is AUTO (1st photo). It can detect correct CPU parameters if BIOS is MANUAL (2nd photo) and need flag "-f" to boot in FX-6300 hackintosh. Both new kernels for 10.9.5 and 10.10.5 also worked in FX-6300 hackintosh. 1 Link to comment Share on other sites More sharing options...
Recommended Posts