Bronya Posted August 2, 2017 Share Posted August 2, 2017 Thanks for this rc3 boot file which still got wrong parameter if BIOS is AUTO (1st photo). Hi ! Thank for test ! I is have fx ! Also wrong parameter ! But this correctly ! Because FX only chooses independently ! If load Win and run CPU-Z , also wrong show if in bios is auto ! Need install MANUAL Multiplier ! 2 Link to comment Share on other sites More sharing options...
ErmaC Posted August 2, 2017 Share Posted August 2, 2017 Another courtesy made by Bronya. Enoch 2893 Ryzen -> removed ErmaC 6 Link to comment Share on other sites More sharing options...
jsl Posted August 3, 2017 Share Posted August 3, 2017 Another courtesy made by Bronya. Enoch 2893 Ryzen -> Enoch_2893_Bronya.zip ErmaC Thanks for this new Enoch_2893_Bronya bootloader which can boot to desktop without flag of "-f" at 10.12.6 & 10.11.6 for FX-6300 hackintosh. But in Ryzen 1700X hackintosh it still need flag of "fsb=100" to boot and cpu-x showed different values of Bus Speed, Rated FSB & Multiplier Can it be fixed ? Or it's a bug of cpu-x because console showed the correct values at 10.9.5 ? Link to comment Share on other sites More sharing options...
Bronya Posted August 4, 2017 Share Posted August 4, 2017 Why need this flag fsb=100 ? Without this no works ? Link to comment Share on other sites More sharing options...
Ciro82 Posted August 4, 2017 Share Posted August 4, 2017 Why need this flag fsb=100 ? Without this no works ? Is there any chance to try a 10.12.6 modded Kernel? Link to comment Share on other sites More sharing options...
jsl Posted August 4, 2017 Share Posted August 4, 2017 Why need this flag fsb=100 ? Without this no works ? Without this flag it still freezes after [KEXTS PATCHER START] appears as previous version (rc2 or ?). Link to comment Share on other sites More sharing options...
Bronya Posted August 4, 2017 Share Posted August 4, 2017 New kernel rc3 Link to comment Share on other sites More sharing options...
Ciro82 Posted August 4, 2017 Share Posted August 4, 2017 New kernel rc3 Oh is there a new kernel ready? Where? Link to comment Share on other sites More sharing options...
jsl Posted August 4, 2017 Share Posted August 4, 2017 New kernel rc3 These new rc3 kernels of 10.9.5 and 10.10.5 need "-f" with rc3 boot and need "fsb=100" with Enoch_2893_Bronya bootloader in Ryzen 1700X hackintosh. Link to comment Share on other sites More sharing options...
Ciro82 Posted August 4, 2017 Share Posted August 4, 2017 New kernel rc3 Does it works with 10.12.6? I don't understand.... Link to comment Share on other sites More sharing options...
Bronya Posted August 4, 2017 Share Posted August 4, 2017 Only 10.9.5 and 10.10.5 kernels Link to comment Share on other sites More sharing options...
Bronya Posted August 4, 2017 Share Posted August 4, 2017 Hi ! Yes , on my FX with this Enoch_2893_Bronya.zip i gets also wrong fsb ... without flag fsb=... not works and get panic tsc_init ... Need fix Enoch_2893 ... 2 Link to comment Share on other sites More sharing options...
Gigamaxx Posted August 4, 2017 Share Posted August 4, 2017 You have to try it, I do not have ryzen I tested and it Kernel Panicked so I reinstalled 12.6 systemkext and it booted to black screen. Are there any other kexts to test out? I rebuilt caches, tried -s everything but no success for 12.6 Ryzen and lilukext. 1 Link to comment Share on other sites More sharing options...
ErmaC Posted August 5, 2017 Share Posted August 5, 2017 Hi ! Yes , on my FX with this Enoch_2893_Bronya.zip i gets also wrong fsb ... without flag fsb=... not works and get panic tsc_init ... Need fix Enoch_2893 ... THX Bronya for the fix... I hope this is finally ok... --> Enoch_2893_Bronya_Fix.zip ErmaC 3 Link to comment Share on other sites More sharing options...
jsl Posted August 6, 2017 Share Posted August 6, 2017 Thanks for this Enoch_2893_Bronya_Fix boot. At 10.11.6 it can boot to desktop without flag of "fsb=200" in FX-6300 hackintosh. At 10.12GM, 10.12.4 or 10.12.6 it still need flag of "fsb=200" in FX-6300 hackintosh, if without this flag it always got trap ip errors which was showing too fast to be identified by vision. In Ryzen 1700X hackintosh it can boot to desktop without flag of "fsb=100" at 10.9.5, 10.10.5, & 10.12.6. Both cpu-x and console showed the correct values. But at 10.11.6 it need both flags of "fsb=100" and "busratio=38" to boot correctly. Link to comment Share on other sites More sharing options...
Bronya Posted August 6, 2017 Share Posted August 6, 2017 Yes , you need fix kernel... 1 Link to comment Share on other sites More sharing options...
jsl Posted August 6, 2017 Share Posted August 6, 2017 Yes , you need fix kernel... How to fix the kernels of FX-6300 hackintosh ? By KernelPm=yes ? or something else ? Can you fix kernel of 10.11.6 for Ryzen 1700X hackintosh ? Link to comment Share on other sites More sharing options...
Bronya Posted August 6, 2017 Share Posted August 6, 2017 I can fix , but have no time . Then you build or other developer . 1 Link to comment Share on other sites More sharing options...
cyrhex Posted August 8, 2017 Share Posted August 8, 2017 I can fix , but have no time . Then you build or other developer . your rc2 kernel for sierra still works great,appstore works and icloud,,sleep/resume works great,,im using clover 4128... 1 Link to comment Share on other sites More sharing options...
jsl Posted August 11, 2017 Share Posted August 11, 2017 I tested and it Kernel Panicked so I reinstalled 12.6 systemkext and it booted to black screen. Are there any other kexts to test out? I rebuilt caches, tried -s everything but no success for 12.6 Ryzen and lilukext. For 10.12.5 can you load Lilu.kext, AppleALC.kext, & WhateverGreen.kext successfully by Clover EFI in Ryzen hackintosh ? Because I have tried many ways in vain at 10.12.6 in my Ryzen 1700X hackintosh by Clover v.4101, v.4114, & v.4152. Link to comment Share on other sites More sharing options...
Recommended Posts