pkdesign Posted March 31, 2017 Share Posted March 31, 2017 I've been trying for hours to get Snow Leopard to boot using Clover (v4035). I use to be able to boot this partition with Chameleon so I now it's a working install. Can anyone help me with what settings I need to use in config? I have attached what I currently use for El Capitan. Machine details are in my signature. Any help would be appreciated. config.plist.zip Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/ Share on other sites More sharing options...
SigmaTel Posted March 31, 2017 Share Posted March 31, 2017 Well, you are not alone... I could not even start Clover (MBR and BIOS to blame?). Is your machine BIOS or UEFI? I'm using Tapatalk, so I don't see your signature. _____ Another dummy signature Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2396204 Share on other sites More sharing options...
pkdesign Posted March 31, 2017 Author Share Posted March 31, 2017 Really? That’s interesting. It's crazy frustrating. It's a legacy BIOS board. My Sig: Gigabyte GA-EX58-UD4P | Core i7-975 Extreme Edition | EVGA NVIDIA GeForce GTX 750 Ti 2047 MB | 12GB RAM | Mac OS 10.11.6 | Clover_v2.4k_r4035 | FakeSMC 6.23.1417 | SMBios MacPro 5,1 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2396246 Share on other sites More sharing options...
MaLd0n Posted April 1, 2017 Share Posted April 1, 2017 try clover 3811 https://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.3k_r3811.zip/download and efinvram disable Disabler.EFINVRAM.zip GTX 750 Ti in SL? Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2396270 Share on other sites More sharing options...
pkdesign Posted April 2, 2017 Author Share Posted April 2, 2017 try clover 3811 https://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.3k_r3811.zip/download and efinvram disable Disabler.EFINVRAM.zip GTX 750 Ti in SL?construction.gif It could very well be the GTX 750 ti but I figured I could at least boot using nv_disable=1. What exactly does the file you attached do? I tried using Clover v3811 and put your attached kext into the 10.6 kext folder along with FakeSMC but still no boot. It boots to clover, I select Snow Leopard disk, it gets to "PCI Configuration Begin" and then stops. 1 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2396931 Share on other sites More sharing options...
MaLd0n Posted April 2, 2017 Share Posted April 2, 2017 Clover in SL or Lion have kp EFINVRAM, the injector only disable it try with a npci=0x2000 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2396951 Share on other sites More sharing options...
pkdesign Posted April 3, 2017 Author Share Posted April 3, 2017 Clover in SL or Lion have kp EFINVRAM, the injector only disable it try with a npci=0x2000 Adding that did notthing. Stops in the same place. Surely someone out there uses Clover to boot Snow Leopard? Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2398026 Share on other sites More sharing options...
PippoX0 Posted April 4, 2017 Share Posted April 4, 2017 Clover can boot from Tiger up to Sierra. Enoch/Chameleon does the same. It's only matter of using the right config and kexts for your HWare. sent from my iPhone Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2398374 Share on other sites More sharing options...
pkdesign Posted April 4, 2017 Author Share Posted April 4, 2017 Clover can boot from Tiger up to Sierra. Enoch/Chameleon does the same. It's only matter of using the right config and kexts for your HWare. sent from my iPhone I realize that. That is why I am asking here for help as to what my config.plist or other settings should be. What other users may use. I currently boot into El Capitan with no issues at all, so I used the same config.plist (which was attached to my first post) to ask if anyone can see an issue with it re: Snow Leopard. Is there a certain version of Clover I need to use? Are there any settings I need or not need? Does the version of FakeSMC I use matter when trying to boot into SL? These are the issues I need advice about. The only kext I currently need and use (to boot into El Capitan) is FakeSMC (with plug ins) and realtekALC. I don't care about network or audio as I would just like to boot into SL for a few legacy apps. It would stand to reason that the same configurations for my hardware should work with Snow Leopard, yet they don't. Perhaps it is my graphic card. SL may simply not be able to work with it. Can anyone confirm that? I do not have another card that I can swap in and out to test. Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2398658 Share on other sites More sharing options...
bsld Posted May 2, 2017 Share Posted May 2, 2017 The biggest problem I have with clover right now is no-matter which settings I put it doesn't give me any useful info when I try to boot with my OSX 10.6 containing partition - it just freezes on its nice pretty but useless GUI selection screen. I believe with older versions it gave me some meaningless numbers at least.Currently I'm trying to boot the OS X 10.6 installation DVD using it. Before that I tried to boot the already installed OS (I used MBR based boot-loader to install it before) with the same luck.I already hate Clover so much - is there any alternative to it for the 10.6?Like it's un-acceptable for me that Clover is ignoring my simplest request to acquire more information about why the heck it isn't booting Snow leopard.And before anyone asks - I want to install Snow Leopard because it supports Rosetta and so I can run Power PC games on it. Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2416070 Share on other sites More sharing options...
naquaada Posted September 21, 2017 Share Posted September 21, 2017 I have completely removed AppleEFIRuntime.kext, now Leopard and Snow Leopard are working. If you want to use Leopard, you must use Clover 3882 because it's the last version with 32bit support. 10.6 also boots with newer versions. 1 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2498846 Share on other sites More sharing options...
fusion71au Posted May 9, 2019 Share Posted May 9, 2019 (edited) On 4/1/2017 at 10:41 AM, pkdesign said: It's a legacy BIOS board. My Sig: Gigabyte GA-EX58-UD4P | Core i7-975 Extreme Edition | EVGA NVIDIA GeForce GTX 750 Ti 2047 MB | 12GB RAM | Mac OS 10.11.6 | Clover_v2.4k_r4035 | FakeSMC 6.23.1417 | SMBios MacPro 5,1 I know this is an old thread but the op used a MacPro5,1 SMBIOS that was not supported in SL until 10.6.8 and 64 bit boot only (most retail installers are 10.6.3 and default to 32 bit booting - see this blog post for difficulties when trying to install SL on a real MacPro5,1). I originally installed SL 10.6.3 in standard 32 bit mode on my desktop GA-P55A-UD3 using Clover and iMac11,3 SMBIOS, then updated to 10.6.8 with the combo updater. Changing the SMBIOS to MacPro5,1, the boot process would hang due to FakeSMC injection failing ---> in 32 bit mode, message about kext "thinning failed" appears in boot log. The solution was to use an older FakeSMC version (eg Slice's FakeSMC ver 3.4.2 works but newer 3.5.0 does not, Rehabman's FakeSMC ver 6.21-315-gad4f8dd.1727 also works OK) and the following boot flags: -v arch=x86_64 -nehalem_error_disable -v = verbose boot to confirm FakeSMC actually loadedarch=x86_64 = force booting in 64 bit mode-nehalem_error_disable = prevent kernel panic from AppleTyMCEDriver.kext when using MacPro5,1 SMBIOS without ECC memory The advantage of the MacPro5,1 SMBIOS + latest Clover r4920 for my machine is that it allows me to boot macOS from 10.6.8 to Mojave 10.14.4 using the same config.plist ... SL compatible FakeSMC.zip Edited May 9, 2019 by fusion71au Attached SL compatible FakeSMC (Slice or Rehabman versions) 1 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2673079 Share on other sites More sharing options...
pkdesign Posted May 10, 2019 Author Share Posted May 10, 2019 Hi Fusion, This is very interesting to me. The SL on my hard drive 10.6.8. It was an old drive I was using before upgrading to HS. I also use Clover 4920. I copied the FakeSMC that you provided (RehabMan version) and added the following to my config.plist: <key>Boot</key> <dict> <key>Arguments</key> <string>-v arch=x86_64 -nehalem_error_disable</string> <key>Debug</key> <false/> <key>DefaultVolume</key> <string>High Sierra</string> <key>Legacy</key> <string>PBR</string> <key>Secure</key> <false/> <key>Timeout</key> <integer>3</integer> <key>XMPDetection</key> <string>Yes</string> </dict> The following is from preboot log: 5:443 0:001 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 5:443 0:000 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800) 5:451 0:007 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_SMMSensors.kext (v.1800) 5:457 0:006 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_LPCSensors.kext (v.1800) 5:471 0:013 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800) 5:476 0:004 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800) 5:477 0:001 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_ACPISensors.kext (v.1800) When I tried to boot I get all the way to the followg andthen it stops: Not sure what is wrong. Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2673283 Share on other sites More sharing options...
fusion71au Posted May 11, 2019 Share Posted May 11, 2019 @pkdesign, From your screen shot, the good news is that FakeSMC is being correctly injected by Clover and is clearly loading during the boot process. Bad news is that you have a different problem now: "still waiting for root device" means your system is waiting for a bootable system drive to appear and is not able to find it... For some reason, the SATA port you have attached your old SL hard drive is not being recognised by Snow Leopard. Try a different SATA port, make sure AHCI mode is enabled in the BIOS. double-check your BIOS drive priority? What SMBIOS, 3rd party kexts did you use with Chameleon when you originally installed SL? Have you tried Clover with this original SMBIOS + your old kexts in 32 bit mode? Maybe add -x (safe mode boot) &/or -f (without caches)? Might be easier to try a fresh "clean" install of SL with Clover, perhaps on a different hard drive eg externally connected USB hard drive or hard drive attached to a different SATA port? Can you boot a SL 10.6.3 DVD with say MacPro3,1 SMBIOS or iMac11,3 SMBIOS in 64 bit mode? If not, 32bit mode? Good Luck! Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2673305 Share on other sites More sharing options...
chris1111 Posted May 11, 2019 Share Posted May 11, 2019 (edited) config and kext attaching here for snow I add nv_disable=1 for your graphics card, this card is not support in Snow config - kexts.zip Edited May 11, 2019 by chris1111 Link to comment https://www.insanelymac.com/forum/topic/322389-cant-boot-to-snow-leopard-using-clover/#findComment-2673306 Share on other sites More sharing options...
Recommended Posts