macinsane Posted June 12, 2018 Share Posted June 12, 2018 5 minutes ago, MaLd0n said: Clover put all hardware to work, the problems is a fine tune, all hacks need many many patches, u can inject via ssdt, clover or edit dsdt Of course you're right! I've done all this fine tuning dozens of times for years now, but this time was a bit different, because I literally changed nothing and a software update just did the job. Usually it gets worse when Apple releases new stuff 1 Link to comment Share on other sites More sharing options...
nomadturk Posted June 12, 2018 Share Posted June 12, 2018 (edited) hey @MaLd0n Can you editing my DSDT? Thanks. Asus z170 deluxe Send me imac-1.home.zip Edited June 13, 2018 by nomadturk Link to comment Share on other sites More sharing options...
Olilen Posted June 12, 2018 Share Posted June 12, 2018 Hi MaLd0n, You help me some days ago by providing me a clover.zip including a dsdt for my brand new build (Strix Z370-I, I7-8700K, no GPU). It's been working great so far and I will make a donation (please provide link...). I had to disable power nap as system was rebooting overnight. I have just (finally) received my GPU 1080ti and will plug it in... Do I need a new DSDT or I simply install latest NVDIA web drivers, update the EFI config.plist and reboot ? Attached is the report of my current and working set-up (without the GPU installed) Send me MacOli.zip Link to comment Share on other sites More sharing options...
BackwardMac Posted June 12, 2018 Share Posted June 12, 2018 41 minutes ago, MaLd0n said: send me new SEND_ME after reboot with new folder CLOVER.zip Clover put all hardware to work, the problems is a fine tune, all hacks need many many patches, u can inject via ssdt, clover or edit dsdt Here it is Mald0n Thanks to working on it Send me Pierres-iMac.zip Link to comment Share on other sites More sharing options...
rob88v Posted June 13, 2018 Share Posted June 13, 2018 On 6/9/2018 at 3:30 PM, MaLd0n said: try set HS02 to 0, default is 3 btw, u dont need any ssdt, ssdts just made some acpi errors, have all patches in DSDT The onboard card ended up being the issue so I ended up taking out the onboard bluetooth-wifi card from the motherboard so I can have full use of my BCM94360CS Apple card. Sleeps perfectly without issue! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 5 hours ago, nomadturk said: hey @MaLd0n Can you editing my DSDT? Thanks. Asus z170 deluxe Send me imac-1.home.zip USE ONLY THIS FOLDER, IF U USE HACKINTOSH KEXTS IN S/L/E OR L/E, REMOVE CLOVER.zip 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 5 hours ago, Olilen said: Hi MaLd0n, You help me some days ago by providing me a clover.zip including a dsdt for my brand new build (Strix Z370-I, I7-8700K, no GPU). It's been working great so far and I will make a donation (please provide link...). I had to disable power nap as system was rebooting overnight. I have just (finally) received my GPU 1080ti and will plug it in... Do I need a new DSDT or I simply install latest NVDIA web drivers, update the EFI config.plist and reboot ? Attached is the report of my current and working set-up (without the GPU installed) Send me MacOli.zip Paypal is here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S use it and install web driver CLOVER.zip if have problems, tell me 5 hours ago, BackwardMac said: Here it is Mald0n Thanks to working on it Send me Pierres-iMac.zip tell me what not working, u test sleep, shutdown? 1 Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 (edited) 8 hours ago, MaLd0n said: Paypal is here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S use it and install web driver CLOVER.zip if have problems, tell me tell me what not working, u test sleep, shutdown? Yes Sorry So I made several test and : Sleep/wake works like a charm, when I wake the build I recover USB and Audio. (I Using Voodoo actually). And I'm able to wake the computer with the the keyboard which was not the case before. so thank you for that. Shutdown not working well. When I just boot and shutdown, it always restart. (which was already the case before) The interesting thing is that when I boot, sleep and wake and shutdown, it works fine, the computer don't restart. I verify my BIOS setting, test with different option and no change, it restart after shutdown. Graphics : IGPU is well recognised, with 1536mo of memory, but I'm not able to do a dual display. 2 display work on the EVGA GT 740 but when trying to connect one screen to the IGPU it goes to BIOS, but on OS X it stay black (it was already the case before) don't know if you can help me on that. The strange thing is that in system profiler, the UHD 630 is now recognized as firewire slot... And the GT 740 doesn't appear in System profiler PCI, instead I have an error that say it is unable to collect data from PCI slot Note : I inject an SSDT-UIAC to activate only the real USB port used, I can see it works on IOreg but it has no effect on the shutdown issue Edited June 13, 2018 by BackwardMac Link to comment Share on other sites More sharing options...
nomadturk Posted June 13, 2018 Share Posted June 13, 2018 (edited) 11 hours ago, MaLd0n said: USE ONLY THIS FOLDER, IF U USE HACKINTOSH KEXTS IN S/L/E OR L/E, REMOVE Thank you. @MaLd0n everything is flawless. Sound, sleep, shutdown, wake up etc. Edited June 13, 2018 by nomadturk Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 5 hours ago, BackwardMac said: Yes Sorry So I made several test and : Sleep/wake works like a charm, when I wake the build I recover USB and Audio. (I Using Voodoo actually). And I'm able to wake the computer with the the keyboard which was not the case before. so thank you for that. Shutdown not working well. When I just boot and shutdown, it always restart. (which was already the case before) The interesting thing is that when I boot, sleep and wake and shutdown, it works fine, the computer don't restart. I verify my BIOS setting, test with different option and no change, it restart after shutdown. Graphics : IGPU is well recognised, with 1536mo of memory, but I'm not able to do a dual display. 2 display work on the EVGA GT 740 but when trying to connect one screen to the IGPU it goes to BIOS, but on OS X it stay black (it was already the case before) don't know if you can help me on that. The strange thing is that in system profiler, the UHD 630 is now recognized as firewire slot... And the GT 740 doesn't appear in System profiler PCI, instead I have an error that say it is unable to collect data from PCI slot Note : I inject an SSDT-UIAC to activate only the real USB port used, I can see it works on IOreg but it has no effect on the shutdown issue u dont need ssdt usb, just use flag, uia_exclude=HS01; etc test DSDT.aml.zip new SEND_ME after reboot Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 26 minutes ago, MaLd0n said: u dont need ssdt usb, just use flag, uia_exclude=HS01; etc test DSDT.aml.zip new SEND_ME after reboot After test with the new aml (I delete the SSDT USB I add before) Sleep/wake works as before, like a charme. Shutdown always restart, even if I sleep/wake the computer before, so it is worst. Graphics : This time the UHD 630 appear on ethernet slot in system profiler. Note : I can see during the verbose of the boot that there is less acpi error, no more PXSX for exemple. Note 2 : there is the same error during collect data in PCI system profiler. I wil give an other donation because you work really hard for me Send me Pierres-iMac.zip 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 1 hour ago, BackwardMac said: After test with the new aml (I delete the SSDT USB I add before) Sleep/wake works as before, like a charme. Shutdown always restart, even if I sleep/wake the computer before, so it is worst. Graphics : This time the UHD 630 appear on ethernet slot in system profiler. Note : I can see during the verbose of the boot that there is less acpi error, no more PXSX for exemple. Note 2 : there is the same error during collect data in PCI system profiler. I wil give an other donation because you work really hard for me Send me Pierres-iMac.zip FOR SHUTDOWN/RESTART PROBLEM, ENABLE erp OPTION IN BIOS check if work now, pout both files in clover/acpi/patched Arquivo Comprimido.zip new dump after reboot 1 Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 45 minutes ago, MaLd0n said: FOR SHUTDOWN/RESTART PROBLEM, ENABLE erp OPTION IN BIOS check if work now, pout both files in clover/acpi/patched Arquivo Comprimido.zip new dump after reboot OK so better and better.. Sleep/wake still working really well Shutdown now work well to (Can't believe I miss the ERP option in bios) Graphics UHD 630 appear as built which is nice But in PCI in system profiler there is still the same issue, unable to collect data... Do you thing you can help me to make the dual display possible (one screen on GT 740 and the other on the UHD 630) I would like to use the display port of the UHD 630 Whatever a BIG THANK YOU for your work your are brilliant!!! Send me Pierres-iMac.zip Link to comment Share on other sites More sharing options...
viktr Posted June 13, 2018 Share Posted June 13, 2018 On 6/3/2018 at 3:42 PM, MaLd0n said: check my image Olarila High Sierra 10.13.5, just unzip, burn and boot just change ur usb patch limit port for ur system Yes, already found that, ty!!! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 2 hours ago, BackwardMac said: OK so better and better.. Sleep/wake still working really well Shutdown now work well to (Can't believe I miss the ERP option in bios) Graphics UHD 630 appear as built which is nice But in PCI in system profiler there is still the same issue, unable to collect data... Do you thing you can help me to make the dual display possible (one screen on GT 740 and the other on the UHD 630) I would like to use the display port of the UHD 630 Whatever a BIG THANK YOU for your work your are brilliant!!! Send me Pierres-iMac.zip loos very good, next week i'll try solve pci devices bug in new mobo serie 300 Enjoy 1 1 Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 3 minutes ago, MaLd0n said: loos very good, next week i'll try solve pci devices bug in new mobo serie 300 Enjoy You deserve some rest ;-) So I will keep an eye on it and on your work. Thanks again. Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 36 minutes ago, MaLd0n said: loos very good, next week i'll try solve pci devices bug in new mobo serie 300 Enjoy Can I make donation to you instead of the site? (I already gave some to the site) Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 2 minutes ago, BackwardMac said: Can I make donation to you instead of the site? (I already gave some to the site) Here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S 1 Link to comment Share on other sites More sharing options...
BackwardMac Posted June 13, 2018 Share Posted June 13, 2018 3 minutes ago, MaLd0n said: Here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S Done!! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 2 minutes ago, BackwardMac said: Done!! Tim Tim xD 1 Link to comment Share on other sites More sharing options...
pit5bul Posted June 13, 2018 Share Posted June 13, 2018 On 6/11/2018 at 11:19 AM, MaLd0n said: if ur patch don't exist there, u need create one Location, nothing about it in tables i tried finding a patch , apparently there isn't any that is BMN0 at offset 0x20 . would you be able to assist ? I would appreciate it very much personally Link to comment Share on other sites More sharing options...
nomadturk Posted June 13, 2018 Share Posted June 13, 2018 (edited) 1 hour ago, MaLd0n said: Tim Tim xD You my friend,we should appreciate your work.. So I have donated too. Thanks again. Edited June 13, 2018 by nomadturk 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 13, 2018 Author Share Posted June 13, 2018 10 hours ago, nomadturk said: Thank you. @MaLd0n everything is flawless. Sound, sleep, shutdown, wake up etc. Welcome, bro! Enjoy! 47 minutes ago, pit5bul said: i tried finding a patch , apparently there isn't any that is BMN0 at offset 0x20 . would you be able to assist ? I would appreciate it very much personally RehabMan have a good tuto about it 2 Link to comment Share on other sites More sharing options...
pit5bul Posted June 13, 2018 Share Posted June 13, 2018 3 minutes ago, MaLd0n said: Welcome, bro! Enjoy! RehabMan have a good tuto about it Oh i tried following but i have no programming skills , its requires knowledge that is way beyond my understanding , i actually tried to modify the HP 17t patch that addresses BMN0 at offset 0x21 and I failed , couldn't even go past clover loading the DSDT file. Link to comment Share on other sites More sharing options...
akosm Posted June 15, 2018 Share Posted June 15, 2018 (edited) @MaLd0n hi MaLdon,can you help me with my dsdt and ssdt.It is difficult for me to edit dsdt and ssdts,I tried but failed.Thank you very much! In my clover/acpi/patched,some patched ssdt or dsdt may be no useful. Send me miuideMacBook-Air.zip This is zip my original DSDT and SSDT. origin.zip Edited June 15, 2018 by akosm Link to comment Share on other sites More sharing options...
Recommended Posts