macinsane Posted June 7, 2018 Share Posted June 7, 2018 Sorry, @Mald0n to disturb you again, but after some testing I have to say the dsdt isn't working at all... No matter if the dsdt is in place or not, this is what happens: Shutdown leads to instant restart, BUT: if I send the pc to sleep (what works using Gymnae's method with SSDT-GPRW.aml alongside with your or my dsdt), wake him up again, then shutdown works. BUT: After booting up again, system halts at bios splash screen. I can see that my usb devices aren't powered up properly (my USB audio stays off for example, so does the keyboard). I am totally out of ideas at the moment. I have added the dsdt I compiled for reference. DSDT.aml.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 7, 2018 Author Share Posted June 7, 2018 9 hours ago, visin said: Just forgot Clover F4 to extract the file, now upload another copy, thank you. https://www30.zippyshare.com/v/03smvXQC/file.html just use folder above, have all there 2 hours ago, luky35 said: Hi MaLd0n： Please help me make DSDT, thank you. Please, take a picture of the error when I log into the system if it is possible to repair it. CPU: Intel Core i5-6500, Codename Skylake5, Socket H4 ( LGA 1151 ) Motherboard: Lenovo Skylake, Chipset Intel Q170 ( Skylake PCH-H ) GPU: Intel HD Graphic 530 Network: Intel Ethernet Connection I219-LM Intel Dual band Wireless-AC 8260 AC 2x2 Wifi Adapter Audio: Realtec ALC286, Intel SKYLAKE PCH-H High Definition Audio Controler Memory: 2x8GB PC4 DDR4-2400 /PC4-19200, SSD 256 GB Thank you, EFI.zip Error.zip Milan’s iMac.zip origin.zip Problem.zip post a full dump, run app, check first post Link to comment Share on other sites More sharing options...
luky35 Posted June 7, 2018 Share Posted June 7, 2018 1 hour ago, MaLd0n said: just use folder above, have all there post a full dump, run app, check first post @MaLd0n hi, I get an error when I enter my password to enter. It does not show any error before. I do not know what it can be wrong because it shows exactly the same error in HS 10.13.5 and Mojave 10.14. Im asking for help. Link to comment Share on other sites More sharing options...
Olilen Posted June 7, 2018 Share Posted June 7, 2018 18 hours ago, MaLd0n said: CLOVER.zip Many many thanks MaLd0n. You're genius ! BT now works like a charm ! Everything seems much snappier. Anything I should be aware of before connecting to iCloud and trying iMessage ? About this Mac reports proc to be a "3,7 GHz 6-Core Intel Xeon E5" instead of I7-8700K. Is this important ? Cheers Link to comment Share on other sites More sharing options...
MaLd0n Posted June 7, 2018 Author Share Posted June 7, 2018 4 hours ago, luky35 said: @MaLd0n hi, I get an error when I enter my password to enter. It does not show any error before. I do not know what it can be wrong because it shows exactly the same error in HS 10.13.5 and Mojave 10.14. Im asking for help. password in system or app? 3 hours ago, Olilen said: Anything I should be aware of before connecting to iCloud and trying iMessage ? About this Mac reports proc to be a "3,7 GHz 6-Core Intel Xeon E5" instead of I7-8700K. Is this important ? Cheers is a vanilla solution in clover, cpu type, just a cosmetic Link to comment Share on other sites More sharing options...
Olilen Posted June 7, 2018 Share Posted June 7, 2018 32 minutes ago, MaLd0n said: is a vanilla solution in clover, cpu type, just a cosmetic Hi MaLd0n, By "vanilla", do you mean serial number, board Id, etc are not properly set for using the iCloud/imessage services because they are just generic ? Is there a guide somewhere you would recommend I follow to get iMessage/iCloud properly set ? Many thanks for your help. Link to comment Share on other sites More sharing options...
visin Posted June 8, 2018 Share Posted June 8, 2018 9 hours ago, MaLd0n said: just use folder above, have all there post a full dump, run app, check first post Problems found so far: Audio not work. Trouble to see how to solve? I tested all the ALC662 IDs and it doesn't work https://www101.zippyshare.com/v/T9d31uag/file.html Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 5 hours ago, Olilen said: Hi MaLd0n, By "vanilla", do you mean serial number, board Id, etc are not properly set for using the iCloud/imessage services because they are just generic ? Is there a guide somewhere you would recommend I follow to get iMessage/iCloud properly set ? Many thanks for your help. generate with Clover Configurator Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 6 hours ago, MaLd0n said: password in system or app? is a vanilla solution in clover, cpu type, just a cosmetic This error exits me after entering the password to enter the system. Then I click Open and I'm in the system. There is then a box describing the error that I sent you as a Problem. I'm glad if it's a possible solution to help me. Thank you and best regards. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 2 hours ago, visin said: Problems found so far: Audio not work. Trouble to see how to solve? I tested all the ALC662 IDs and it doesn't work https://www101.zippyshare.com/v/T9d31uag/file.html u need test other layout-id for ur codec 6 minutes ago, luky35 said: This error exits me after entering the password to enter the system. Then I click Open and I'm in the system. There is then a box describing the error that I sent you as a Problem. I'm glad if it's a possible solution to help me. Thank you and best regards. no idea try a fresh install u can try with -x too Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 (edited) 5 hours ago, MaLd0n said: u need test other layout-id for ur codec no idea try a fresh install u can try with -x too I made a new installation, and in the second part of the installation, where the country was selected, I was immediately shown the same error, which quickly disappeared so that I could not read what it says, but I think the same was the announcement of Reopen. the installation went normally without error. When I reset my PC, I get the same error when I logged in to the system that I sent you a picture. In 2017, you made me DSDT.aml (I apply it) and I did not have any problem until HS 10.13. It is possible that it would be necessary to make a new DSDT.aml, which would eliminate this error, I do not know because I am a layman in this. What is your opinion as an expert? I'm also willing to donate. Thank you and best regards. DSDT.aml.zip Err.zip Edited June 8, 2018 by luky35 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 9 hours ago, luky35 said: I made a new installation, and in the second part of the installation, where the country was selected, I was immediately shown the same error, which quickly disappeared so that I could not read what it says, but I think the same was the announcement of Reopen. the installation went normally without error. When I reset my PC, I get the same error when I logged in to the system that I sent you a picture. In 2017, you made me DSDT.aml (I apply it) and I did not have any problem until HS 10.13. It is possible that it would be necessary to make a new DSDT.aml, which would eliminate this error, I do not know because I am a layman in this. What is your opinion as an expert? I'm also willing to donate. Thank you and best regards. DSDT.aml.zip Err.zip u can try install Mojave and error appears? CLOVER.zip Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 11 minutes ago, MaLd0n said: u can try install Mojave and error appears? CLOVER.zip 1. Can I use this Clover in HS 10.13.5, or only in Mojave? 2. When I did a fresh installation of Mojave, the error did not appear at the time of installation. 3. It first appeared when Mojave was installed and I reset the PC. 4. At that time, the error occurred after entering the system, just like HS 10.13.5. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 4 minutes ago, luky35 said: 1. Can I use this Clover in HS 10.13.5, or only in Mojave? 2. When I did a fresh installation of Mojave, the error did not appear at the time of installation. 3. It first appeared when Mojave was installed and I reset the PC. 4. At that time, the error occurred after entering the system, just like HS 10.13.5. folder work for sierra, high sierra and mojave first, disconect all hdd/ssd, use only one for high sierra or mojave Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 19 minutes ago, MaLd0n said: folder work for sierra, high sierra and mojave first, disconect all hdd/ssd, use only one for high sierra or mojave I tried with your Clover in HS 10.13.5, which I have installed, but it does not fix the error. I do not know if you should have a clean installation with your Clover? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 2 minutes ago, luky35 said: I tried with your Clover in HS 10.13.5, which I have installed, but it does not fix the error. I do not know if you should have a clean installation with your Clover? ye try a fresh install with one hdd/ssd 1 Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 3 minutes ago, MaLd0n said: ye try a fresh install with one hdd/ssd I will now try a fresh installation of Mojave and let you know the result. In the PC, I only have 1 SSD 256 GB and nothing else. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 1 hour ago, luky35 said: I will now try a fresh installation of Mojave and let you know the result. In the PC, I only have 1 SSD 256 GB and nothing else. k, format hdd/ssd and go to fresh install Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 1 hour ago, MaLd0n said: k, format hdd/ssd and go to fresh install MaLd0n hi, Install on the fresh High Sierro 10.13.5 and Mojave, the error does not show anymore. The Clover menu now shows me two more disks: - Boot macOS Install Prebooter from Preboot - Boot FileVault Prebooter from Preboot In the config.plist I typed them under Hidden, but still show them in the Start menu Clover. Please help me save this, so that they do not appear in Clover. I want to give you a donation via PayPal so please write me how. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 5 minutes ago, luky35 said: MaLd0n hi, Install on the fresh High Sierro 10.13.5 and Mojave, the error does not show anymore. The Clover menu now shows me two more disks: - Boot macOS Install Prebooter from Preboot - Boot FileVault Prebooter from Preboot In the config.plist I typed them under Hidden, but still show them in the Start menu Clover. Please help me save this, so that they do not appear in Clover. I want to give you a donation via PayPal so please write me how. send me files with updated app RunMe.app my paypal is here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S 1 Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 3 minutes ago, MaLd0n said: send me files with updated app RunMe.app Send me Milans-iMac.fritz.box.zip Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 14 minutes ago, MaLd0n said: send me files with updated app RunMe.app my paypal is here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S I sent you a donation and thank you very much for your help. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 13 minutes ago, luky35 said: Send me Milans-iMac.fritz.box.zip check for hide, just type a simple name 1 Link to comment Share on other sites More sharing options...
luky35 Posted June 8, 2018 Share Posted June 8, 2018 4 minutes ago, MaLd0n said: check for hide, just type a simple name He does not want to hide because I still see them in the Clover start menu Clover Link to comment Share on other sites More sharing options...
MaLd0n Posted June 8, 2018 Author Share Posted June 8, 2018 3 minutes ago, luky35 said: He does not want to hide because I still see them in the Clover start menu Clover send me one photo clover boot screen for check names 1 Link to comment Share on other sites More sharing options...
Recommended Posts