mumblist Posted January 6, 2019 Share Posted January 6, 2019 config.plist, acpi tab Cheers, Ill take a peek and see if i can work it out Link to comment Share on other sites More sharing options...
mumblist Posted January 6, 2019 Share Posted January 6, 2019 (edited) All worked out. Id Stupidly placed the dsdt file into the origin folder and not the patched one so all seems fine now thanks sorry for all the questions tho. im also having slow write speeds on the ssd boot drive. Boot up seems fine but near double with trim enabled and with and without trim the write speeds no where near match the read speeds. Is this likely to be the Apfs system format? Thanks for your time Edited January 6, 2019 by mumblist Link to comment Share on other sites More sharing options...
buyjoey Posted January 7, 2019 Share Posted January 7, 2019 Hi, @MaLd0n Long time no see!! Please help me for my new MB's DSDT Send me CJ.zip Here is my file. I tried other's DSDT(The same MB) but it showed lots of ACPI errors in boot log. Thank you in advance! Link to comment Share on other sites More sharing options...
MaLd0n Posted January 7, 2019 Author Share Posted January 7, 2019 Hi, @MaLd0n Long time no see!! Please help me for my new MB's DSDT Send me CJ.zip Here is my file. I tried other's DSDT(The same MB) but it showed lots of ACPI errors in boot log. Thank you in advance! DSDT.aml.zip GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 Link to comment Share on other sites More sharing options...
buyjoey Posted January 7, 2019 Share Posted January 7, 2019 DSDT.aml.zip GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 Thank you!!! Once boot was well with IGPU (but it shows in slot-3, not built-in) and restart made KP. TT Link to comment Share on other sites More sharing options...
fryysyd Posted January 9, 2019 Share Posted January 9, 2019 @MaLd0n Moderator, 87K and sapphire RX590, please make a dsdt. In addition, wake up immediately after sleep, do not know where something went wrong, can you fix it? Thanks. Send me iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted January 9, 2019 Author Share Posted January 9, 2019 On 1/7/2019 at 3:33 AM, buyjoey said: Thank you!!! Once boot was well with IGPU (but it shows in slot-3, not built-in) and restart made KP. TT u need check if have all kexts in last version and some config check a good folder here https://olarila.com/forum/viewtopic.php?f=28&t=8222 17 minutes ago, fryysyd said: @MaLd0n Moderator, 87K and sapphire RX590, please make a dsdt. In addition, wake up immediately after sleep, do not know where something went wrong, can you fix it? Thanks. Send me iMac.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
jamvybz Posted January 10, 2019 Share Posted January 10, 2019 hey can i get some help please i used CLOVER.SERIES.100.200.300.zip to try a boot my system but this is all that im getting try i try to boot Link to comment Share on other sites More sharing options...
Onay Rodriguez Posted January 10, 2019 Share Posted January 10, 2019 (edited) Greetings @MaLd0n, can you help me please with DSDT edits? The one you sent me stopped working after a new bios came out for my board. Here I attached the new SendMe folder generated by the RunMe app. I'm using High Sierra 10.13.16 (still waiting for nVidia to release drivers for Mojave). Thank you very much in advance for your time and help Send me Onays-iMac.zip Edited January 10, 2019 by Onay Rodríguez Link to comment Share on other sites More sharing options...
MaLd0n Posted January 11, 2019 Author Share Posted January 11, 2019 7 hours ago, jamvybz said: hey can i get some help please i used CLOVER.SERIES.100.200.300.zip to try a boot my system but this is all that im getting try i try to boot u try other uefi driver like aptiov3? Link to comment Share on other sites More sharing options...
MaLd0n Posted January 11, 2019 Author Share Posted January 11, 2019 6 hours ago, Onay Rodríguez said: Greetings @MaLd0n, can you help me please with DSDT edits? The one you sent me stopped working after a new bios came out for my board. Here I attached the new SendMe folder generated by the RunMe app. I'm using High Sierra 10.13.16 (still waiting for nVidia to release drivers for Mojave). Thank you very much in advance for your time and help Send me Onays-iMac.zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
jamvybz Posted January 11, 2019 Share Posted January 11, 2019 (edited) 1 hour ago, MaLd0n said: u try other uefi driver like aptiov3? yes i did and no luck with getting it to start, the system is a HP Pavilion 590-p0070 with a i7 8700 Intel H370 chipset origin.zip Edited January 11, 2019 by jamvybz addding dsdt Link to comment Share on other sites More sharing options...
MaLd0n Posted January 11, 2019 Author Share Posted January 11, 2019 16 hours ago, jamvybz said: yes i did and no luck with getting it to start, the system is a HP Pavilion 590-p0070 with a i7 8700 Intel H370 chipset origin.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
jamvybz Posted January 11, 2019 Share Posted January 11, 2019 1 hour ago, MaLd0n said: DSDT.aml.zip thanks a lot i was able to get pass the error that i was having b4 using dsdt but im still not able to get into the installer im trying to see if i can fix it on my own if not ill post and update thanks again for your help Link to comment Share on other sites More sharing options...
Moi83 Posted January 12, 2019 Share Posted January 12, 2019 (edited) HI Mald0n, Could you please patch my dsdt. My Mobo Gigabyte z370 aorus gaming 5 + i7 8700k UHD 630 + nvidia gtx 1080 Thanks a lot in advance! Send me DESKTOP-CHEKMQL.zip Edited January 12, 2019 by Moi83 Link to comment Share on other sites More sharing options...
jamvybz Posted January 12, 2019 Share Posted January 12, 2019 (edited) 12 hours ago, MaLd0n said: DSDT.aml.zip thanks again, just an update thanks to you i got macos installed the reason why it wasn't working whit the dsdt seemed to be because of the USB but i got it working i just need to get my iGPU to work now . its a UHD 630 cant seem to get it working Send me Hps-iMac.zip Edited January 12, 2019 by jamvybz adding files that i need help with Link to comment Share on other sites More sharing options...
metaphysician Posted January 12, 2019 Share Posted January 12, 2019 hi Mald0n and everybody it's been several years and i'm finally back at the hackintosh thing. i followed the instructions pretty closely and downloaded what i thought i needed. motherboard is a Gigabyte Z370 XP SLI, running BIOS F11. i'm currently unable to boot from the USB stick with Clover on it. i get 'boot6' and then it goes to the gray screen with the blue and black DOS-like lettering. if i go into the Boot Manager everything is empty. same with the Device Manager. i cannot seem to add boot options in the Boot Maintenance Manager either. as far as the tasks i used Create Installer Media to make the USB disk with High Sierra on it , for Clover i installed the one you linked to on the stick and replaced the folder with the one you linked from Olarilla. not sure what else i can do at this point - i am dead in the water right now. any help appreciated! Link to comment Share on other sites More sharing options...
STLVNUB Posted January 12, 2019 Share Posted January 12, 2019 Why you use legacy boot?, use Uefi! Rest should be pretty straight forward. Link to comment Share on other sites More sharing options...
metaphysician Posted January 12, 2019 Share Posted January 12, 2019 (edited) i'm not using Legacy Boot. BIOS is configured for UEFI booting. but no matter what i do it goes to the same window - it looks like it's called the Boot Maintenence Manager. i'm reading that it might be because i have no USB2 ports. i hope that's not the issue. i have enabled Legacy support on the USB configuration. Update - okay it seems Boot Maintenence Manager is expressly for Legacy booting devices. if i turn off Legacy support on USB then my USB stick is not recognized by the system. i know my USB stick is most likely a USB 2 device. however i think the more serious issue is that it sees no boot device in the list for Boot Manager or Device Manager. so something is really strange. i've tried in UEFI booting mode as well as Legacy - no difference. i still see no choices to boot from. Edited January 12, 2019 by metaphysician Link to comment Share on other sites More sharing options...
metaphysician Posted January 12, 2019 Share Posted January 12, 2019 (edited) okay i really need help here. i went to using the Tony Mac uni, which did actually create an EFI partition ( The Create Install Media app did not do this task). but i am unable to boot from either partition. the only task that i did differently had to do with the High Sierra installer. it came as a 19MB download so i found out a way to get the installer to download the rest of the files. they downloaded into a folder i can't remember the name directly onto the HD. but i took all of those files in that folder (including InstallESDDmg.pkg) and copied them to the Contents>SharedSupport directory under the app (i had to create the SharedSupport directory). i'm not 100% sure if the naming is correct - i followed the conventions of the Sierra installer i had which is a full installer. i checked the permissions and they were set the same as the other folders. i really don't think this should be an issue - unless maybe the naming convention or placement or filepath changed for High Sierra compared to Sierra. as it is, right now i am booting UEFI, and the USB stick has two partitions. selecting either partition fails. if i pick the UEFI partition it will hang, but if i select the other one it will fail and go into BIOS again. at this point i'm not even getting to the Boot Maintenence Manager window. i just get nothing. there must be something i'm not doing correctly. any assistance appreciated! especially from anyone with Gigabyte z370 boards. it just can't be this difficult to just get into Clover. i was using Clover r4813 BTW but the installer i just configured has a different Clover version i'd bet. Edited January 12, 2019 by metaphysician Link to comment Share on other sites More sharing options...
MaLd0n Posted January 12, 2019 Author Share Posted January 12, 2019 12 hours ago, Moi83 said: HI Mald0n, Could you please patch my dsdt. My Mobo Gigabyte z370 aorus gaming 5 + i7 8700k UHD 630 + nvidia gtx 1080 Thanks a lot in advance! Send me DESKTOP-CHEKMQL.zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted January 12, 2019 Author Share Posted January 12, 2019 10 hours ago, jamvybz said: thanks again, just an update thanks to you i got macos installed the reason why it wasn't working whit the dsdt seemed to be because of the USB but i got it working i just need to get my iGPU to work now . its a UHD 630 cant seem to get it working Send me Hps-iMac.zip DSDT.aml.zip video check here Link to comment Share on other sites More sharing options...
barnum Posted January 12, 2019 Share Posted January 12, 2019 (edited) HI Mald0n, Could you please patch my dsdt. My Mobo Gigabyte b250-hd3p + i5 6500 I use your clover directory to install Mojave. Should I install/remove some kext ? Thanks CLOVER.extract.zip Edited January 12, 2019 by barnum Link to comment Share on other sites More sharing options...
jamvybz Posted January 12, 2019 Share Posted January 12, 2019 2 hours ago, MaLd0n said: DSDT.aml.zip video check here thanks i was trying to use the FB-Patcher but i didnt have any luck but i didn't have the link to the read up so im gonna do that now .oh and tried using the new dsdt that you just sent but the system wouldn't boot idk if it has anything to do with the debug lilu and boot flags that i just added Link to comment Share on other sites More sharing options...
jamvybz Posted January 12, 2019 Share Posted January 12, 2019 (edited) 1 hour ago, jamvybz said: it seems like the system not booting has nothing to do with the dsdt it just seem not not boot anytime i try someone new like a new kext but it takes for ever to start boot again it just keeps restart im lost to whats going on. Edited January 12, 2019 by jamvybz Link to comment Share on other sites More sharing options...
Recommended Posts