messikoko Posted October 15, 2018 Share Posted October 15, 2018 are h310 motherboards good for hacintosh , with a rx 580 i saw in some post people having lot of issues with h310 motherboards 8 hours ago, mihu_yo said: Changing SMBIOS to IMAC 18.1 solved my problem! Could you tell us what app is this? Regards! hello which app is this( to check system info) can you give me link Link to comment Share on other sites More sharing options...
MaLd0n Posted October 15, 2018 Author Share Posted October 15, 2018 VideoProc.app 1 Link to comment Share on other sites More sharing options...
messikoko Posted October 15, 2018 Share Posted October 15, 2018 3 hours ago, MaLd0n said: VideoProc.app Thank you , Please can you tell me was anyone able to boot Mojave on asus h130m-e i know h310 motherboard have usb issue but i bought a asus h310m-e motherboard already before hitting these post i have still not opened the seal of the motherboard package .... my other pc specs (i5 8400 , SAPPHIRE RX 580 4 GB) still to assemble... i dont care about my usb 3.0 ports , i just want audio, usb 2.0 , lan working i can try different hacks as best i can cause returning the motherboard is going to be a headache please some one reply to this post , so that chances of me returning the motherboard will increase instead i will by a b360 motherboard . Link to comment Share on other sites More sharing options...
MaLd0n Posted October 15, 2018 Author Share Posted October 15, 2018 47 minutes ago, messikoko said: Thank you , Please can you tell me was anyone able to boot Mojave on asus h130m-e i know h310 motherboard have usb issue but i bought a asus h310m-e motherboard already before hitting these post i have still not opened the seal of the motherboard package .... my other pc specs (i5 8400 , SAPPHIRE RX 580 4 GB) still to assemble... i dont care about my usb 3.0 ports , i just want audio, usb 2.0 , lan working i can try different hacks as best i can cause returning the motherboard is going to be a headache please some one reply to this post , so that chances of me returning the motherboard will increase instead i will by a b360 motherboard . post ur files RunMe.app 2 Link to comment Share on other sites More sharing options...
messikoko Posted October 15, 2018 Share Posted October 15, 2018 (edited) 22 minutes ago, MaLd0n said: post ur files RunMe.app THANK YOU SO MUCH SIR FOR REPLY I STILL DID NOT ASSEMBLE MY COMPUTER ( my ram and ssd are not delivered yet ) , AS SOON AS I DO ASSEMBLE IT AND SET IT UP I WILL POST ALL REQUIRED FILES i found this interesting Reddit post for h310 chipset as of now https://bit.ly/2RRm0xg i will catch with you in a few days , and will post all files needed ( hope asus h310m-e works , i only bought this pc so that i could use mac os on it ) Thank you Sir for reply i hope support is better with new upcoming imacs based on coffelake Edited October 15, 2018 by messikoko Link to comment Share on other sites More sharing options...
MaLd0n Posted October 15, 2018 Author Share Posted October 15, 2018 work good too, but i prefer gigabyte, but all work 2 Link to comment Share on other sites More sharing options...
bob963963 Posted October 16, 2018 Share Posted October 16, 2018 Open IGPU FCPX will restart Thanks Send me GhostdeiMac.lan.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 16, 2018 Author Share Posted October 16, 2018 3 hours ago, bob963963 said: Open IGPU FCPX will restart Thanks Send me GhostdeiMac.lan.zip DSDT.aml.zip -Use IntelGFX 59128086 ig-platform-id 59120003 Check InjectIntel shikigva=60 1 Link to comment Share on other sites More sharing options...
Osk Posted October 17, 2018 Share Posted October 17, 2018 (edited) Hi MaLd0n. Thanks for your help, your posts are excellent, short and clear. I´m noob in this hackintosh scene. I had learn from other forums until I found this yesterday and your clover folder and config.plist help me a lot with issues I had for weeks and that I was give up to fix. You are right, only looking into the files is good for understanding, but I do not know anything about programing, just a computers fanboy. My current system (Asus prime z270-A, I5 7500, intel hd630) is running good and smooth in Mojave with hardware acceleration, power managment, audio etc. I only have two remaining issues: 1. Pc go to sleep but do not wake up, got black screen or reebot when pressing keys or moving mouse to wake 2. Usb 3.0 ports works now (thanks to your config.plist) but my external usb harddrive shows as internal, but it can be hotswapped normally. Flash drives shows correctly as external in desktop. Same usb hdd connected to Asmedia USB 3.1 shows correctly as external. Ill really apreciate if you can have a look and point me in the right direction, I do not have the knowledge to figure it out the problems. Thanks Send me OSK iMac.zip Edited October 17, 2018 by Osk Link to comment Share on other sites More sharing options...
MaLd0n Posted October 17, 2018 Author Share Posted October 17, 2018 4 minutes ago, Osk said: Hi MaLd0n. Thanks for your help, your posts are excellent, short and clear. I´m noob in this hackintosh scene. I had learn from other forums until I found this yesterday and your clover folder and config.plist help me a lot with issues I had for weeks and that I was give up to fix. You are right, only looking into the files is good for understanding, but I do not know anything about programing, just a computers fanboy. My current system (Asus prime z270-A, I5 7500, intel hd630) is running good and smooth in Mojave with hardware acceleration, power managment, audio etc. I only have two remaining issues: 1. Pc go to sleep but do not wake up or reebot when pressing keys or moving mouse. 2. Usb 3.0 ports works now (thanks to your config.plist) but my external usb harddrive shows as internal, but it can be hotswapped normally. Flash drives shows correctly as external in desktop. Same usb hdd connected to Asmedia USB 3.1 shows correctly as external. Ill really apreciate if you can have a look and point me in the right direction, I do not have the knowledge to figure it out the problems. Thanks Send me OSK iMac.zip DSDT.aml.zip i some cases sleep with intelhd don't work u can check here if have solution https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v150/ 1 1 Link to comment Share on other sites More sharing options...
Osk Posted October 17, 2018 Share Posted October 17, 2018 40 minutes ago, MaLd0n said: DSDT.aml.zip i some cases sleep with intelhd don't work u can check here if have solution https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v150/ DSDT.aml goes in EFI/CLOVER/ACPI/PATCHED right? Link to comment Share on other sites More sharing options...
bob963963 Posted October 17, 2018 Share Posted October 17, 2018 9 hours ago, MaLd0n said: DSDT.aml.zip -Use IntelGFX 59128086 ig-platform-id 59120003 Check InjectIntel shikigva=60 Thank you for Use the parameter you gave igpu to disappear in Graphics. PCI display slot pci slot 3 no Built-in pci 980T Islot 0 Link Speed: 2.5GT/S no 8.0GT/S Link to comment Share on other sites More sharing options...
rajkhand Posted October 17, 2018 Share Posted October 17, 2018 On 10/5/2018 at 6:06 PM, MaLd0n said: update kexts and update system I have tried 3 times and the display after the first boot shows the apple logo with progress bar then the display goes to sleep and then nothing happens I waited for 30 minutes and then rebooted. but it will not proceed further. The last error is something to do with APFS. I have upgraded the clover bootloader to 2.4 4700. it boots perfectly in high sierra and everything works. My system at present is on HPF+ I have downloaded the Mohave installer from Apple appstore and tried to upgrade but same problem. please advise Link to comment Share on other sites More sharing options...
MaLd0n Posted October 17, 2018 Author Share Posted October 17, 2018 11 hours ago, bob963963 said: Thank you for Use the parameter you gave igpu to disappear in Graphics. PCI display slot pci slot 3 no Built-in pci 980T Islot 0 Link Speed: 2.5GT/S no 8.0GT/S is correct, appears only in pci and ioreg 5 hours ago, rajkhand said: I have tried 3 times and the display after the first boot shows the apple logo with progress bar then the display goes to sleep and then nothing happens I waited for 30 minutes and then rebooted. but it will not proceed further. The last error is something to do with APFS. I have upgraded the clover bootloader to 2.4 4700. it boots perfectly in high sierra and everything works. My system at present is on HPF+ I have downloaded the Mohave installer from Apple appstore and tried to upgrade but same problem. please advise no idea, u need check what cause problem 1 Link to comment Share on other sites More sharing options...
bob963963 Posted October 18, 2018 Share Posted October 18, 2018 12 hours ago, MaLd0n said: 是正确的，只出现在pci和ioreg中 不知道，你需要检查是什么原因造成的问题 Thanks for your help but AE IGPU RAM 0M, ps AI does not detect graphics processor .Looking forward to your reply.Thanks again. Link to comment Share on other sites More sharing options...
sashik Posted October 19, 2018 Share Posted October 19, 2018 Hi MaLdon! I have a problem with RunMe.app It always get stuck on IORegistry Explorer I have IORegistry Explorer 3. But the RunMe opens an older version of this app. In result IOREG dump always failing. BTW every permission granted. Link to comment Share on other sites More sharing options...
MaLd0n Posted October 20, 2018 Author Share Posted October 20, 2018 3 hours ago, sashik said: Hi MaLdon! I have a problem with RunMe.app It always get stuck on IORegistry Explorer I have IORegistry Explorer 3. But the RunMe opens an older version of this app. In result IOREG dump always failing. BTW every permission granted. 1 Link to comment Share on other sites More sharing options...
napolix23 Posted October 20, 2018 Share Posted October 20, 2018 Send me Messis-iMac.zip ############### ( here are files from runme.app) Please help me build dsdt and ssdt for cpu power management Here are my specs i5 8400 Gigabyte Z370M D3H 16 GB CORSAIR 2400 RAM SAPPHIRE AMD RX 580 4GB EVERYHING WORKING BUT CPU POWER MANAGEMENT IS BAD NO HEVC ON UHD 630 IDK IF WORKS ON MAC DID NOT TEST LONG HOURS OF SLEEP IF YOU HAVE DSDT OF Z370M-D3H CAN YOU PLEASE SHARE ME Link to comment Share on other sites More sharing options...
MaLd0n Posted October 20, 2018 Author Share Posted October 20, 2018 20 minutes ago, napolix23 said: Send me Messis-iMac.zip ############### ( here are files from runme.app) Please help me build dsdt and ssdt for cpu power management Here are my specs i5 8400 Gigabyte Z370M D3H 16 GB CORSAIR 2400 RAM SAPPHIRE AMD RX 580 4GB EVERYHING WORKING BUT CPU POWER MANAGEMENT IS BAD NO HEVC ON UHD 630 IDK IF WORKS ON MAC DID NOT TEST LONG HOURS OF SLEEP IF YOU HAVE DSDT OF Z370M-D3H CAN YOU PLEASE SHARE ME DSDT.aml.zip -Use IntelGFX 59128086 ig-platform-id 59120003 Check InjectIntel shikigva=60 1 Link to comment Share on other sites More sharing options...
esnydal Posted October 20, 2018 Share Posted October 20, 2018 Hi maestro, could you help me wit a new DSDT. I have already one from you which is perfectly working with High Sierra on my NvMe, but I can't use it with Mojave on my second hard drive (regular Sata SSD) I have to take it away from my EFI to be able to boot Mojave on my regular SSD set up as primary HD in Bios. Thanks a lot again Send me Nydals-Phantom.zip DSDT OK for High Sierra OS on NvMe HD.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted October 20, 2018 Author Share Posted October 20, 2018 1 hour ago, esnydal said: Hi maestro, could you help me wit a new DSDT. I have already one from you which is perfectly working with High Sierra on my NvMe, but I can't use it with Mojave on my second hard drive (regular Sata SSD) I have to take it away from my EFI to be able to boot Mojave on my regular SSD set up as primary HD in Bios. Thanks a lot again Send me Nydals-Phantom.zip DSDT OK for High Sierra OS on NvMe HD.zip DSDT.aml.zip use my clover folder for serie 10,20 and 30 1 Link to comment Share on other sites More sharing options...
esnydal Posted October 20, 2018 Share Posted October 20, 2018 Thx MaLd0n!! It's working with your Clover, totally different from mine in fact, seems a lot more "complicated", I don't understand a lot of things in it but that's not a problem I'll try to learn Can I add my previous SSDT-USB.aml in it and of course all my personal serial numbers? Link to comment Share on other sites More sharing options...
MaLd0n Posted October 20, 2018 Author Share Posted October 20, 2018 1 hour ago, esnydal said: Thx MaLd0n!! It's working with your Clover, totally different from mine in fact, seems a lot more "complicated", I don't understand a lot of things in it but that's not a problem I'll try to learn Can I add my previous SSDT-USB.aml in it and of course all my personal serial numbers? yes, use ur serials u can use ur ssdt, in mojave patch limit port don't work Link to comment Share on other sites More sharing options...
napolix23 Posted October 20, 2018 Share Posted October 20, 2018 (edited) 5 hours ago, MaLd0n said: DSDT.aml.zip -Use IntelGFX 59128086 ig-platform-id 59120003 Check InjectIntel shikigva=60 thx maldon for dsdt file uhd hevc still broken (default values) uhd 630 totally broken using (above values) my cpu is too spiky i am not able to generate ssdt with coffee lake ssdtgen tried 100 times , showin error in coffelake cfg etc please can you share i5 8400 ssdt . idk if related to hackintosh also my brand new 3 days old kingston a400 ssd shows life remaining 1% in HW monitor ( i enabled trim too) (annoying) Edited October 20, 2018 by napolix23 Link to comment Share on other sites More sharing options...
MaLd0n Posted October 20, 2018 Author Share Posted October 20, 2018 45 minutes ago, napolix23 said: thx maldon for dsdt file uhd hevc still broken (default values) uhd 630 totally broken using (above values) my cpu is too spiky i am not able to generate ssdt with coffee lake ssdtgen tried 100 times , showin error in coffelake cfg etc please can you share i5 8400 ssdt . idk if related to hackintosh also my brand new 3 days old kingston a400 ssd shows life remaining 1% in HW monitor ( i enabled trim too) (annoying) is not broken, check ioreg, igpu is load 1 Link to comment Share on other sites More sharing options...
Recommended Posts