ruki250 Posted August 9, 2018 Share Posted August 9, 2018 7 hours ago, ruki250 said: Hi Maldon, I've recently updated the bios, can you make me a new DSDT? Thanks in advance. Send me iMac.zip Up Link to comment Share on other sites More sharing options...
MaLd0n Posted August 9, 2018 Author Share Posted August 9, 2018 54 minutes ago, gigibatt said: for the SMBIOS as I told you, if I use the MacBookPro 13.1 I have problems of mouse lag at boot, if I use the 13.3 okay but the HDMI output does not go and I can not use a second screen in mirror. At the moment using MacBook Pro 9.1 seems to go all. In your opinion what is better for PC performance? Considering that my processor and a skylake ... (and macbook pro 13.3 and always skylake) mbp13,1,2 or 3, need a tests 15 minutes ago, ruki250 said: Up https://www.insanelymac.com/forum/topic/321872-guide-sierra-high-sierra-mojave-on-mobos-serie-100-200-300-skylake-kabylake-coffeelake-dsdt/?do=findComment&comment=2629436 1 Link to comment Share on other sites More sharing options...
Anonym323 Posted August 9, 2018 Share Posted August 9, 2018 (edited) @MaLd0n I need your help on this This one using an UHD 620 (0x59178086) Send me 5917.zip I also need help on this aswell : since both files are together bigger then 10 mb I used an external link for the other one. I hope this is ok for everyone. https://www.dropbox.com/s/iqj1xqcumcfx670/Send me Dell.zip?dl=0 Edited August 10, 2018 by Anonym323 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 2 hours ago, Anonym323 said: @MaLd0n I need your help on this This one using an UHD 620 (0x59178086) Send me 5917.zip I also need help on this aswell : since both files are together bigger then 10 mb I used an external link for the other one. I hope this is ok for everyone. https://www.dropbox.com/s/iqj1xqcumcfx670/Send me Dell.zip?dl=0 8th CLOVER.zip ur notebook dont have a S3 state, sleep don't work i think, need add it, some week ago i made one, have a hard work Dell CLOVER.zip Link to comment Share on other sites More sharing options...
Anonym323 Posted August 10, 2018 Share Posted August 10, 2018 thanks for the files. Unfortunately I am stock with the 8th gen EFI right here Any Idea? @MaLd0n Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 4 hours ago, Anonym323 said: thanks for the files. Unfortunately I am stock with the 8th gen EFI right here Any Idea? @MaLd0n check intelgfx fake and ig-platform-id Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 Dear Mald0n, Now PowerManagement of CPU it seems to working correctly. could be implemented a patch that remove wake from USB but without completely disable it for charging devices? Also should I use HighCurrent in Clover? With your DSDT(and without) I have fan speed issue on Mojave on Vega 56 Pulse.The fan will go to the desired speed but they aren't turning down until I play a video with a player like IINA Player. Could be solved?Send me iProdiFederico.zip Many thanks in advance Link to comment Share on other sites More sharing options...
Anonym323 Posted August 10, 2018 Share Posted August 10, 2018 1 hour ago, MaLd0n said: check intelgfx fake and ig-platform-id You didn't set any in config.plist Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 43 minutes ago, jumper981 said: Dear Mald0n, Now PowerManagement of CPU it seems to working correctly. could be implemented a patch that remove wake from USB but without completely disable it for charging devices? Also should I use HighCurrent in Clover? With your DSDT(and without) I have fan speed issue on Mojave on Vega 56 Pulse.The fan will go to the desired speed but they aren't turning down until I play a video with a player like IINA Player. Could be solved?Send me iProdiFederico.zip Many thanks in advance have some injectors for it, check forum search Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 (edited) Already tried injectors for Vega but they didn’t work,Also with custom PowerPlay Tables. For USB how I can disable wake from USB without disable it for charging? Should I use HighCurrent with your DSDT? Edited August 10, 2018 by jumper981 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 Yes Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 Could you modify my DSDT removing Wake from USB without completely disable for power? Link to comment Share on other sites More sharing options...
Anonym323 Posted August 10, 2018 Share Posted August 10, 2018 2 hours ago, MaLd0n said: check intelgfx fake and ig-platform-id which can I try to add? Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 1 hour ago, jumper981 said: Could you modify my DSDT removing Wake from USB without completely disable for power? what problem u have about power? 1 hour ago, Anonym323 said: which can I try to add? check here https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-by-means-of-whatevergreenkext/ Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 19 minutes ago, MaLd0n said: what problem u have about power? check here https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-by-means-of-whatevergreenkext/ No Problem about power only removing wake from USB Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 just remove _prw into device XHC Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 12 minutes ago, MaLd0n said: just remove _prw into device XHC Ok, it works perfectly. Are there some methods for reducing time for entering into sleep mode? Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 9 minutes ago, jumper981 said: Ok, it works perfectly. Are there some methods for reducing time for entering into sleep mode? no, u need wait 15 seconds xD Link to comment Share on other sites More sharing options...
jumper981 Posted August 10, 2018 Share Posted August 10, 2018 2 minutes ago, MaLd0n said: no, u need wait 15 seconds xD Ok,no problem at all Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 12 minutes ago, jumper981 said: Ok,no problem at all enjoy Link to comment Share on other sites More sharing options...
BackwardMac Posted August 10, 2018 Share Posted August 10, 2018 (edited) Hello MaLd0n I made an bios update which solve my issue when screen connected to DP But the previously patch you made doesn't work anymore. so have issue with sleep, shutdown, restart. Can you patch it for me please? PS : I need to use SCM enable for my DP screen, when disable nothing work. Thanks a lot. Send me MacProPierre.zip Edited August 10, 2018 by BackwardMac Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 35 minutes ago, BackwardMac said: Hello MaLd0n I made an bios update which solve my issue when screen connected to DP But the previously patch you made doesn't work anymore. so have issue with sleep, shutdown, restart. Can you patch it for me please? PS : I need to use SCM enable for my DP screen, when disable nothing work. Thanks a lot. Send me MacProPierre.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
BackwardMac Posted August 10, 2018 Share Posted August 10, 2018 45 minutes ago, MaLd0n said: DSDT.aml.zip Thanks for your quick answer. It's magic, I can finally see all device in PCI. But there is some thing not working Sleep : not working, screen goes black, power style on and Mac is freez Shutdown : same as sleep Restart : long but working, can handle that. Audio, and PCI working well. To let you know, i''m using clover 4630 and just changed ig platform and intelgfx from your config.plist to match with my video. Hope you will be able to solved this, thanks! Send me MacProPierre.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted August 10, 2018 Author Share Posted August 10, 2018 17 minutes ago, BackwardMac said: Thanks for your quick answer. It's magic, I can finally see all device in PCI. But there is some thing not working Sleep : not working, screen goes black, power style on and Mac is freez Shutdown : same as sleep Restart : long but working, can handle that. Audio, and PCI working well. To let you know, i''m using clover 4630 and just changed ig platform and intelgfx from your config.plist to match with my video. Hope you will be able to solved this, thanks! Send me MacProPierre.zip replace full folder, reboot and test drivers64UEFI.zip Link to comment Share on other sites More sharing options...
BackwardMac Posted August 11, 2018 Share Posted August 11, 2018 19 minutes ago, MaLd0n said: replace full folder, reboot and test drivers64UEFI.zip Ok so, it works really better, sleep, restart, shutdown working well. If I understand well, I can't use aptioMemoryFix yet and I need to stay with EmuVariable and OsxAptioFix. Any idea why? I notice that my Intel UHD 630 appear as firewire like few month ago, can you just change that? I also notice some ACPI error in kernel log, like CNDP, HDEF, PXSX, is it ok to let this? after those two things the mobo will be fully functional thanks a lot men! Send me MacProPierre.zip Link to comment Share on other sites More sharing options...
Recommended Posts