MaLd0n Posted July 31, 2018 Author Share Posted July 31, 2018 1 hour ago, truongcao said: Hi Can you help me clean this up to get it working properly? thanks thanks Send me mons-iMac.zip use only my clover folder, don't need files in l/e r s/l/e CLOVER.zip 59 minutes ago, Jobe5150 said: I don't understand? GFX0 to IGPU 1 Link to comment Share on other sites More sharing options...
Jobe5150 Posted July 31, 2018 Share Posted July 31, 2018 (edited) 2 hours ago, MaLd0n said: GFX0 to IGPU Figured it out, got the VooDooPS2 kext to work, found a trackpad panel that works. Keyboard is now funky, can't use num lock. Thank you again Edited July 31, 2018 by Jobe5150 Link to comment Share on other sites More sharing options...
NOKYARD Posted July 31, 2018 Share Posted July 31, 2018 14 hours ago, NOKYARD said: No change. I do not understand what i am doing wrong. Send me iMac2.zip 13 hours ago, MaLd0n said: u need activate ur video I do not understand what you mean by 'activate'. If you mean in the BIOS the Audio, Ethernet, and IGPU are all enabled in the BIOS. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 31, 2018 Author Share Posted July 31, 2018 10 hours ago, NOKYARD said: I do not understand what you mean by 'activate'. If you mean in the BIOS the Audio, Ethernet, and IGPU are all enabled in the BIOS. in Clover, a correct config Link to comment Share on other sites More sharing options...
NOKYARD Posted July 31, 2018 Share Posted July 31, 2018 2 hours ago, MaLd0n said: in Clover, a correct config I have been reading and researching for several days on how to apply the proper config for my setup. The config i sent you was the only one which would successfully boot. Any changes i made to the config would either not boot, or have no effect on activating the Ethernet. I am at a loss as to how to proceed from this point. Link to comment Share on other sites More sharing options...
jamills Posted August 1, 2018 Share Posted August 1, 2018 Thanks Maldon, for the work. DSDT was working , but soon after ,my computer would not boot in osx. So here I am back on 10.13.4. Asus Maximus X Hero i5 8400 Radeon 560. I have updated bios to latest one v 1602. Could you patch new dsdt? Thanks in advance. Send me hugos-iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted August 1, 2018 Author Share Posted August 1, 2018 4 hours ago, jamills said: Thanks Maldon, for the work. DSDT was working , but soon after ,my computer would not boot in osx. So here I am back on 10.13.4. Asus Maximus X Hero i5 8400 Radeon 560. I have updated bios to latest one v 1602. Could you patch new dsdt? Thanks in advance. Send me hugos-iMac.zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
NOKYARD Posted August 2, 2018 Share Posted August 2, 2018 Ended up being a faulty motherboard. Try again next month. Link to comment Share on other sites More sharing options...
jamills Posted August 2, 2018 Share Posted August 2, 2018 17 hours ago, MaLd0n said: DSDT.aml.zip Perfect, I tried it and it work great. I will write a ssdt to limit USB port for XHCI, and then I will test. Also , in you opinion, should I create SSDT for Power Management or just use Pluging Type in Clover? Thanks Mate. Hope you like the Beers. Link to comment Share on other sites More sharing options...
d5aqoep Posted August 2, 2018 Share Posted August 2, 2018 Hi @MaLd0n This Gigabyte Z370N Wifi Mini ITX board is giving me a headache. I am using Intel HD 630 onboard GPU. I can USB Boot and install High Sierra correctly with my own Clover which is the latest r4630 build. However, I changed the USB kext patches to Mojave and the USB installer gets No display half way BEFORE you boot into Initial setup. I can see the progress bar and all but roughly when the initial setup screen is about to show, I get a black screen. So I tried your Clover folder and same result. I am using iMac 18,1 definition. Even with iMacPro 1,1 it's the same black screen. So in short, works on High Sierra and Black screen on Mojave. I tried upgrading High Sierra to Mojave and same black screen. Re-downloaded new Beta 5 copy of Mojave and still black screen. I am at my wit's end. I have enclosed my Clover folder. CLOVER.zip Link to comment Share on other sites More sharing options...
ford22 Posted August 2, 2018 Share Posted August 2, 2018 On 7/1/2018 at 4:39 PM, ford22 said: ASUS P8P67LE INtel I5-3350P REALTEK ALC C892 GTX 1060 APPLEHDA fixed help HDMI signal CABEL ssd AND CLOVER ALL FILE please patched CLOVER https://drive.google.com/file/d/1vKUATrlGtsKhH4yE0a9Xw_Rb28hm9cKw/view?usp=sharing please not signal help fixed APPLECPUID error time 60s fixed help Just now, ford22 said: please not signal help fixed APPLECPUID error time 60s fixed help ASUSP8P67LE.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 2, 2018 Author Share Posted August 2, 2018 6 hours ago, jamills said: Perfect, I tried it and it work great. I will write a ssdt to limit USB port for XHCI, and then I will test. Also , in you opinion, should I create SSDT for Power Management or just use Pluging Type in Clover? Thanks Mate. Hope you like the Beers. don't need ssdt USB and don't need plugin type, have all in DSDT if u need exclude some usb ports, use it example Unused Ports, excluded with flag uia_exclude=HS01;HS02;HS05;HS06;HS07;HS13;HS14;SS03;SS04;SS05;SS06;SS09;SS10;USR1;USR2 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 2, 2018 Author Share Posted August 2, 2018 4 hours ago, d5aqoep said: Hi @MaLd0n This Gigabyte Z370N Wifi Mini ITX board is giving me a headache. I am using Intel HD 630 onboard GPU. I can USB Boot and install High Sierra correctly with my own Clover which is the latest r4630 build. However, I changed the USB kext patches to Mojave and the USB installer gets No display half way BEFORE you boot into Initial setup. I can see the progress bar and all but roughly when the initial setup screen is about to show, I get a black screen. So I tried your Clover folder and same result. I am using iMac 18,1 definition. Even with iMacPro 1,1 it's the same black screen. So in short, works on High Sierra and Black screen on Mojave. I tried upgrading High Sierra to Mojave and same black screen. Re-downloaded new Beta 5 copy of Mojave and still black screen. I am at my wit's end. I have enclosed my Clover folder. CLOVER.zip try a old way - GRAPHICS : Check InjectIntel - GRAPHICS : “ig-platform-id” changed to 0x59120000 - DEVICES : “Fake ID” for IntelGFX changed to 0x59128086 Link to comment Share on other sites More sharing options...
majoract100 Posted August 2, 2018 Share Posted August 2, 2018 Dear Maldonado I Succesful install with your DSDT and Your Clover Folder Big Thanks to HacksLikeMacs. Link to comment Share on other sites More sharing options...
MaLd0n Posted August 2, 2018 Author Share Posted August 2, 2018 48 minutes ago, majoract100 said: Dear Maldonado I Succesful install with your DSDT and Your Clover Folder Big Thanks to HacksLikeMacs. Nice! Enjoy! 1 Link to comment Share on other sites More sharing options...
d5aqoep Posted August 3, 2018 Share Posted August 3, 2018 16 hours ago, MaLd0n said: try a old way - GRAPHICS : Check InjectIntel - GRAPHICS : “ig-platform-id” changed to 0x59120000 - DEVICES : “Fake ID” for IntelGFX changed to 0x59128086 The old way was a grand success at first attempt. Thank you very much!! Link to comment Share on other sites More sharing options...
Check-IN Posted August 4, 2018 Share Posted August 4, 2018 (edited) Hello Friend, I have a problem with the dsdt of my notebook. I wrote a patch for my SSDT with the help of Rehabman, this patch was then added to its MaciASL repository. My problem is that the DSDT of my pc has a defect at the base that I can not solve because I do not know the language. I'll explain to you what the problem is and ask you if you can solve it: Rehabman says that my verbose output shows EC access before the EC host driver is ready and this causes me kernel panic on startup. To solve the problem I have to review my ACPI code that is accessing the EC before the EC is ready (eg _REG not called yet), then patch it appropriately. Are You able to do this for me? I attach my EFI folder and the ORIGIN folder with original DSDT down decompiled in .dsl Thank you http://www.terminalstrip.net/MaldonAirbook/origin.zip http://www.terminalstrip.net/MaldonAirbook/EFI.zip P.S. My donation is in Your payPal Account now... Send me MacBook-Pro.station.zip Edited August 5, 2018 by gigibatt more files Link to comment Share on other sites More sharing options...
MaLd0n Posted August 4, 2018 Author Share Posted August 4, 2018 -UPDATE FIRST POST VIDEO TUTORIAL 2 Link to comment Share on other sites More sharing options...
Check-IN Posted August 5, 2018 Share Posted August 5, 2018 19 hours ago, MaLd0n said: -UPDATE FIRST POST VIDEO TUTORIAL please reply when you have free time thanx Link to comment Share on other sites More sharing options...
Mech314 Posted August 5, 2018 Share Posted August 5, 2018 Hi MaLd0n, Do you have DSDT for Asus ROG z370-g +8700K? I don't see any PCI devices in system report. Thank you! Link to comment Share on other sites More sharing options...
rob88v Posted August 6, 2018 Share Posted August 6, 2018 On 7/28/2018 at 8:39 PM, MaLd0n said: is a USB, work inside XHC device i think have one injectro for it, is a very old injector, like for webcam DSDT.aml.zip if u can, test it and send me new SEND_ME with this DSDT DSDT.NEW TEST.zip Here are the new Send_Me files with the test DSDT, I'm not sure if the injector did anything for the SD Card Reader to allow it to show up properly, is there something I am missing? https://www.dropbox.com/s/zzclmdfdkb7algj/Send me Seans-Hack-Pro.zip?dl=0 Link to comment Share on other sites More sharing options...
gerard71 Posted August 6, 2018 Share Posted August 6, 2018 hello MaLd0n could you do me a DSDT with your method to use a minimum of KEXT for a motherboard Z270 GAMING K3 for Mojave thank you Send me iMac-de-admin.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted August 6, 2018 Author Share Posted August 6, 2018 14 minutes ago, gerard71 said: hello MaLd0n could you do me a DSDT with your method to use a minimum of KEXT for a motherboard Z270 GAMING K3 for Mojave thank you Send me iMac-de-admin.zip CLOVER.zip Link to comment Share on other sites More sharing options...
Babiloe Posted August 7, 2018 Share Posted August 7, 2018 Hi Mald0n Got the Lenovo X270 20HMS5DH00 i7-7600U - Intel HD Graphics 620 I got extract from Clover F4. It has error on decompile Could you short it out? First install there is glitching text if i use verbose Clover install: http://www.mediafire.com/file/iksct54547g4g0n/CLOVER_x270.rar/file dmesg.txt acpi origin x270 2.zip X270 20HMS5DH00.rtf Link to comment Share on other sites More sharing options...
MaLd0n Posted August 7, 2018 Author Share Posted August 7, 2018 12 hours ago, Babiloe said: Hi Mald0n Got the Lenovo X270 20HMS5DH00 i7-7600U - Intel HD Graphics 620 I got extract from Clover F4. It has error on decompile Could you short it out? First install there is glitching text if i use verbose Clover install: http://www.mediafire.com/file/iksct54547g4g0n/CLOVER_x270.rar/file dmesg.txt acpi origin x270 2.zip X270 20HMS5DH00.rtf DSDT.aml.zip change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 1 Link to comment Share on other sites More sharing options...
Recommended Posts