lagbooger Posted July 18, 2018 Share Posted July 18, 2018 On 7/16/2018 at 3:03 PM, MaLd0n said: what ur audio codec? run my app again, send me dump, have all info there Hi Again, I thought I sent this earlier, but did not. I have noticed that if I have the volume below 50% it works fine. Thanks again for your diligence and help! Send me-iMac.zip Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 Sorry it took me sometime to get the system running again, it keep kernel panicking randomly and sometimes the web drivers don't work, it's so weird because I don't change anything but keep restarting and it works once every like 3 - 6 times! Anyway, here are the files Send me Admins-iMac-Pro.zip origin.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 8 minutes ago, lagbooger said: Hi Again, I thought I sent this earlier, but did not. I have noticed that if I have the volume below 50% it works fine. Thanks again for your diligence and help! Send me-iMac.zip use it DSDT.aml.zip and inject via clover, Device tab 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 36 minutes ago, Crypt0_Manic said: Sorry it took me sometime to get the system running again, it keep kernel panicking randomly and sometimes the web drivers don't work, it's so weird because I don't change anything but keep restarting and it works once every like 3 - 6 times! Anyway, here are the files Send me Admins-iMac-Pro.zip origin.zip now WhateverGreen.kext merged intel, nvidia, shiki, amd cards CLOVER.zip Link to comment Share on other sites More sharing options...
lagbooger Posted July 18, 2018 Share Posted July 18, 2018 32 minutes ago, MaLd0n said: use it DSDT.aml.zip and inject via clover, Device tab Hey, you have to remember that I am an idiot, and barely able to type. I have Clover Configurator which has a device section, but nothing like that. And the boot loader doesn't seem to list anything like that. Sorry I am so stupid. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 Just now, lagbooger said: Hey, you have to remember that I am an idiot, and barely able to type. I have Clover Configurator which has a device section, but nothing like that. And the boot loader doesn't seem to list anything like that. Sorry I am so stupid. i checked in applealc kext let me know Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 (edited) panicked 6 times and then booted normally, which is the main problem and very weird, but I have sound now I'm benchmarking at the moment to check scores. why do you think it keeps doing that? Edit 1: it froze in the middle of the benchmark! Edited July 18, 2018 by Crypt0_Manic Link to comment Share on other sites More sharing options...
lagbooger Posted July 18, 2018 Share Posted July 18, 2018 4 minutes ago, MaLd0n said: i checked in applealc kext let me know I copied the DSTD to EFI partition, but I don't know about injecting anything. Rebooted and still the same issue. How would I inject it from this: Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 1 hour ago, Crypt0_Manic said: panicked 6 times and then booted normally, which is the main problem and very weird, but I have sound now I'm benchmarking at the moment to check scores. why do you think it keeps doing that? Edit 1: it froze in the middle of the benchmark! send me one photo with KP screen 1 hour ago, lagbooger said: I copied the DSTD to EFI partition, but I don't know about injecting anything. Rebooted and still the same issue. How would I inject it from this: here test one by one 1, 2, 5, 7, 11, 13 Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 These are the different kps I get. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 45 minutes ago, Crypt0_Manic said: These are the different kps I get. remove lilu, shiki, nvidia fix and whatever green, test with minimum kext as possible Link to comment Share on other sites More sharing options...
ford22 Posted July 18, 2018 Share Posted July 18, 2018 @MaLd0n help me send where clover all laptop or desktop kext please Link to comment Share on other sites More sharing options...
minseung0119 Posted July 18, 2018 Share Posted July 18, 2018 @MaLd0n Can you patch this motherboard's dsdt file? my motherboard is ASUS PRIME Z370-A BIOS Version is 1002. attached file is my motherboard's dsdt file. extracted by clover bootloader. DSDT_ASUS_PRIME_Z370-A_1002.zip Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 8 hours ago, MaLd0n said: remove lilu, shiki, nvidia fix and whatever green, test with minimum kext as possible I only have the ones you sent me in there, AppleALC, EFIcheckDisabler, FakeSMC, Intelmaus, Lilu, USBinjectall, And whatevergreen. I removed Lilu and Whatevergreen, but sound stopped working and the intel HDMI output stopped working, also, it kernel panicked and never went into the system until I used the usb, I put back lilu to get sound back, and it works, but I still have no HDMI through intel. I will put back Whatevergreen and see if the HDMI issue was because of that. Link to comment Share on other sites More sharing options...
lelet Posted July 18, 2018 Share Posted July 18, 2018 Hi @MaLd0n, I have some problem with my last build that I can't solve. MB GB H310M H CPU i3-8100 Graphics Palit GTX 760 (with web driver because I have some lag without) The main problem is that sometimes I have a reboot after shutdown. Other minor problems that I do not care to solve are: - if I put the machine in sleep, I get a restart. Now, with Halt Enabler and Fix Header checked in clover if I put the machine in sleep, the screen turns off for a few seconds and takes me back to the login screen. - the shutdown is strangely longer than usual (1-2 minutes). USB device connected are a BT keyboard and mouse, as well as a USB-wifi antenna (Edimax EW-7612UAN V2) with driver for MacOS HS (which I have now moved to a USB2 port). Erp is already enabled on bios. Please could you help me to understand what does not work properly? Send me Homes-iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 10 hours ago, minseung0119 said: @MaLd0n Can you patch this motherboard's dsdt file? my motherboard is ASUS PRIME Z370-A BIOS Version is 1002. attached file is my motherboard's dsdt file. extracted by clover bootloader. DSDT_ASUS_PRIME_Z370-A_1002.zip DSDT.aml.zip 3 hours ago, Crypt0_Manic said: I only have the ones you sent me in there, AppleALC, EFIcheckDisabler, FakeSMC, Intelmaus, Lilu, USBinjectall, And whatevergreen. I removed Lilu and Whatevergreen, but sound stopped working and the intel HDMI output stopped working, also, it kernel panicked and never went into the system until I used the usb, I put back lilu to get sound back, and it works, but I still have no HDMI through intel. I will put back Whatevergreen and see if the HDMI issue was because of that. whatevergreen now is full merged with intel, amd, nvidia, shiki Arquivo Comprimido.zip Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 10 minutes ago, MaLd0n said: DSDT.aml.zip whatevergreen now is full merged with intel, amd, nvidia, shiki Arquivo Comprimido.zip Still does the same thing, I even tried with different Clover folder with no avail, I though it could be my UEFI settings, so kept playing around with them, nothing still, thought maybe it could be that I'm booting from NVme and the EFI is on the same drive, so I tried a new usb clover and tried booting Sierra installer, same thing... I'm pretty sure it's UEFI settings. I also removed my gfx card completely! I'm running out of thoughts... Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 3 hours ago, lelet said: Hi @MaLd0n, I have some problem with my last build that I can't solve. MB GB H310M H CPU i3-8100 Graphics Palit GTX 760 (with web driver because I have some lag without) The main problem is that sometimes I have a reboot after shutdown. Other minor problems that I do not care to solve are: - if I put the machine in sleep, I get a restart. Now, with Halt Enabler and Fix Header checked in clover if I put the machine in sleep, the screen turns off for a few seconds and takes me back to the login screen. - the shutdown is strangely longer than usual (1-2 minutes). USB device connected are a BT keyboard and mouse, as well as a USB-wifi antenna (Edimax EW-7612UAN V2) with driver for MacOS HS (which I have now moved to a USB2 port). Erp is already enabled on bios. Please could you help me to understand what does not work properly? Send me Homes-iMac.zip TAKE A SHOT CLOVER.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted July 18, 2018 Author Share Posted July 18, 2018 18 minutes ago, Crypt0_Manic said: Still does the same thing, I even tried with different Clover folder with no avail, I though it could be my UEFI settings, so kept playing around with them, nothing still, thought maybe it could be that I'm booting from NVme and the EFI is on the same drive, so I tried a new usb clover and tried booting Sierra installer, same thing... I'm pretty sure it's UEFI settings. I also removed my gfx card completely! I'm running out of thoughts... Link to comment Share on other sites More sharing options...
mR.GeeK Posted July 18, 2018 Share Posted July 18, 2018 (edited) 2 hours ago, MaLd0n said: I'm going through everything one by one, I will get back to you in a few... sorry for the hassle! Edit 1: This is very weird and frustrating... everything is done correctly and it still kernel panics randomly... I even reverted back to an older clover version, still doesn't work. I'm going to give Sierra a try. Edited July 18, 2018 by Crypt0_Manic Link to comment Share on other sites More sharing options...
gaule1 Posted July 18, 2018 Share Posted July 18, 2018 (edited) Hi, MaLd0n, Please patch this for me, Thanks Send me-iMac.zip Edited July 18, 2018 by gaule1 Link to comment Share on other sites More sharing options...
lagbooger Posted July 18, 2018 Share Posted July 18, 2018 19 hours ago, MaLd0n said: send me one photo with KP screen here test one by one 1, 2, 5, 7, 11, 13 Hi Again! It didn't make any difference What other options do I have with this? Thanks! Link to comment Share on other sites More sharing options...
MaLd0n Posted July 19, 2018 Author Share Posted July 19, 2018 3 hours ago, gaule1 said: Hi, MaLd0n, Please patch this for me, Thanks Send me-iMac.zip U DON`T NEED NOTHING MORE, IS A FULL PATCH, JUST TEST AND CHECK IF ALL WORK 2 hours ago, lagbooger said: Hi Again! It didn't make any difference What other options do I have with this? Thanks! u can patch manually https://olarila.com/forum/viewtopic.php?f=28&t=2676 Link to comment Share on other sites More sharing options...
baobeiqq Posted July 19, 2018 Share Posted July 19, 2018 Morning MalD0n. I try to fix my DSDT，but not fine. Please help me,THX a lot.. Is my file Send me NadeiMac.zip .I've fixed the errors and warnings. Link to comment Share on other sites More sharing options...
MaLd0n Posted July 19, 2018 Author Share Posted July 19, 2018 9 hours ago, baobeiqq said: Morning MalD0n. I try to fix my DSDT，but not fine. Please help me,THX a lot.. Is my file Send me NadeiMac.zip .I've fixed the errors and warnings. replace full clover folder, reboot and send me new SEND_ME CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts