Jump to content

[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT

MaLd0n

By MaLd0n,
in Installation Guides

 Share
5,455 posts in this topic

Recommended Posts

hamster163
hamster163
Posted
Posted

Hi MaLd0n, I recently updated to the latest BIOS that came out a few days ago. (I know this was a bad practice for DSDT, but I had to use some of the new features.) I could boot into macOS using the previous DSDT patch from you, but there were some new ACPI warnings. Could you take a quick look? Thanks!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
51 minutes ago, hamster163 said:

Hi MaLd0n, I recently updated to the latest BIOS that came out a few days ago. (I know this was a bad practice for DSDT, but I had to use some of the new features.) I could boot into macOS using the previous DSDT patch from you, but there were some new ACPI warnings. Could you take a quick look? Thanks!

https://www20.zippyshare.com/v/qqwhwDLJ/file.html
send me new SEND_ME after reboot

  • Like 1
Link to comment
Share on other sites
hamster163
hamster163
Posted
Posted
15 minutes ago, MaLd0n said:

Take one test for me

https://www110.zippyshare.com/v/liVoyGY5/file.html
send me new SEND_ME after reboot, we try fix pci

Here it is: https://drive.google.com/open?id=16RC11DMxBA-7mgFTsa3l7tWGJ5W3WVd5

Another quick question -- Is there any way to see the messages during verbose mode after entering macOS? Currently I have to record them using a camera, which I am sure is less than ideal...

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
20 minutes ago, hamster163 said:

Here it is: https://drive.google.com/open?id=16RC11DMxBA-7mgFTsa3l7tWGJ5W3WVd5

Another quick question -- Is there any way to see the messages during verbose mode after entering macOS? Currently I have to record them using a camera, which I am sure is less than ideal...

check if work, put ur serials

https://www30.zippyshare.com/v/k7cVkJmz/file.html
 

use it 

log show --last boot --style syslog

 

Link to comment
Share on other sites
hamster163
hamster163
Posted
Posted (edited)
3 hours ago, MaLd0n said:

check if work, put ur serials

https://www30.zippyshare.com/v/k7cVkJmz/file.html
 

use it 


log show --last boot --style syslog

 

The system booted properly. I could still see some "PXSX + Namespace lookup failure, AE_NOT_FOUND" errors, but those did not affect booting. Here is the new RunMe.app result if you still need it: https://drive.google.com/open?id=1Fx7yDqsYUS4XNy_QJIx_bskCS4Eey9qA

  1. I noticed a significant increase in size of DSDT.aml. Was it because you integrated some of the SSDT patches into DSDT?
  2. In config.plist, the value of RtVariables->ROM was changed from UseMacAddr0 (default) to 00000A000D00. Does the value actually matter? 

EDIT: I mistakenly opened an old log file. There are no ACPI errors now. Thanks!

Edited by hamster163
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
8 hours ago, hamster163 said:

The system booted properly. I could still see some "PXSX + Namespace lookup failure, AE_NOT_FOUND" errors, but those did not affect booting. Here is the new RunMe.app result if you still need it: https://drive.google.com/open?id=1Fx7yDqsYUS4XNy_QJIx_bskCS4Eey9qA

  1. I noticed a significant increase in size of DSDT.aml. Was it because you integrated some of the SSDT patches into DSDT?
  2. In config.plist, the value of RtVariables->ROM was changed from UseMacAddr0 (default) to 00000A000D00. Does the value actually matter? 

EDIT: I mistakenly opened an old log file. There are no ACPI errors now. Thanks!

ye, is clean, i remove all ssdt dependencies, just use dsdt and dropOEM

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
On 6/26/2018 at 9:37 PM, raymundo said:

Hola Podrias Compartir tu CLOVER

?

2 hours ago, ford22 said:

MOB: ASUS PRIME B250M-A

CPU:I7-7700K

GRAPHICS: INTEL HD 630+ NVDIA GEFORCE GTX 1060 6GB

1360X768

REALTEK ALC 887 + INTEL KABY LAKE HDMI + NVDIA  HDMI/DP

HELP CLOVER ALL SEND ME PLEASE 

https://www17.zippyshare.com/v/kSK0x9oL/file.html
PLEASE all dsdt patched fixed kexts please 

post a full dump

run my app

Link to comment
Share on other sites
telepati
telepati
Posted
Posted (edited)
11 hours ago, MaLd0n said:

UPDATE FIRST POST

Mojave Full DSDT patch
 

 

I installed Mojave but no sound with latest AppleALC, all PCI section empty I used High Sierra DSDT which you create for me. I also getting big boot glitch when startup. I think need new DSDT. Can you help me with that. How can I setup like your setup with the minimum amount of third-party kexts!  is Mirone sound patched also will work for my setup?

Edited by telepati
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, telepati said:

 

I installed Mojave but no sound with latest AppleALC, all PCI section empty I used High Sierra DSDT which you create for me. I also getting big boot glitch when startup. I think need new DSDT. Can you help me with that. How can I setup like your setup with the minimum amount of third-party kexts!  is Mirone sound patched also will work for my setup?

same files, u just need update patches and kexts

Link to comment
Share on other sites
ford22
ford22
Posted
Posted

MOB: ASUS PRIME B250M-A

CPU:I7-7700K

GRAPHICS: INTEL HD 630+ NVDIA GEFORCE GTX 1060 6GB

1360X768

REALTEK ALC 887 + INTEL KABY LAKE HDMI + NVDIA  HDMI/DP

HELP CLOVER ALL SEND ME PLEASE  yes signal mojave yes 

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
8 hours ago, ford22 said:

MOB: ASUS PRIME B250M-A

CPU:I7-7700K

GRAPHICS: INTEL HD 630+ NVDIA GEFORCE GTX 1060 6GB

1360X768

REALTEK ALC 887 + INTEL KABY LAKE HDMI + NVDIA  HDMI/DP

HELP CLOVER ALL SEND ME PLEASE  yes signal mojave yes 

post a full dump, read the first post

  • Like 1
Link to comment
Share on other sites
telepati
telepati
Posted
Posted (edited)
21 hours ago, MaLd0n said:

same files, u just need update patches and kexts

 

I already update kexts and patches but definitely something wrong inside of DSDT. With this DSDT I can't boot I always getting this verbose screen at the end its turn prohibited sign when I remove DSDT I can boot without any problem.

 

2nh0zo1.thumb.jpg.e8d8317469cdb803152b2537cbbdbb6c.jpg

Edited by telepati
Link to comment
Share on other sites
Toooorch
Toooorch
Posted
Posted (edited)

Hey MaLdon,


could you please take a look at my DSDT? Tried to apply some patches already but still not good and I am curious how far you can go with it. Used your clover (only deleted thing I think I really don't need) and run.app. Here are the files:
https://www104.zippyshare.com/v/fCl7RDpm/file.html

 

Hardware is laptop Asus ROG Zephyrus GX501 8th Gen Intel CPU

CPU: i7 8750H Coffee Lake - 6 cores

GPU: nVidia 1080 - no optimus - works only without g-sync and 144Hz display

RAM: 24GB

HDD: NVME 512MB Samsung SSD

Trackpad: I2C (I believe this needs DSDT patch) should be ELAN/SA473I-12A4

BT: HCI 9.256 / LMP 9.256 work

WiFi: Intel Wireless-AC 9560 - I know this simply wont work - resolved with usb wifi dongle

Audio: ALC668 (voodoohda works great in this case)

 

For whatever reason I had to add emu variable uefi 64 efi to clover drivers because otherwise the installer freeze at first stage of installation with error - Failed to SET NVRAM property >

Target is not convertible to APFS (but system is already converted to APFS). emuVariableEfi solved that.

 

Thanks in advance!

Edited by Toooorch
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
2 hours ago, Toooorch said:

Hey MaLdon,


could you please take a look at my DSDT? Tried to apply some patches already but still not good and I am curious how far you can go with it. Used your clover (only deleted thing I think I really don't need) and run.app. Here are the files:
https://www104.zippyshare.com/v/fCl7RDpm/file.html

 

Hardware is laptop Asus ROG Zephyrus GX501 8th Gen Intel CPU

CPU: i7 8750H Coffee Lake - 6 cores

GPU: nVidia 1080 - no optimus - works only without g-sync and 144Hz display

RAM: 24GB

HDD: NVME 512MB Samsung SSD

Trackpad: I2C (I believe this needs DSDT patch) should be ELAN/SA473I-12A4

BT: HCI 9.256 / LMP 9.256 work

WiFi: Intel Wireless-AC 9560 - I know this simply wont work - resolved with usb wifi dongle

Audio: ALC668 (voodoohda works great in this case)

 

For whatever reason I had to add emu variable uefi 64 efi to clover drivers because otherwise the installer freeze at first stage of installation with error - Failed to SET NVRAM property >

Target is not convertible to APFS (but system is already converted to APFS). emuVariableEfi solved that.

 

Thanks in advance!

CLOVER.zip

send me new dump after reboot

  • Like 1
Link to comment
Share on other sites
bobamilk
bobamilk
Posted
Posted

Hi MaLd0n
I have a new setup which is i7-8700 + Asus Prime Z370-P + 8GB RAM with intel GPU only.  Everything works except the video.  At first, I kept the inject Intel GPU in config.plist while installed the IntelGraphicsFixup.kext and Lilu.kext but screen has lots of blocks tearing up, then after I disabled the injection in config.plist, the tearing become less, appears only when scrolling and playing youtube videos.  I tried to capture the screen but none of the screen shot shows the problem so I guess it's in the output.  Anyway, included my info and please help me making this work.  The System Report shows onw 7MB of video ram?  Also the boot up is incredibly slow despite it's on NVMe, compares to 5sec on the Windows part which is on a SATA SSD.  I followed this guide from tonymacx86 and pretty much use his EFI folder except all kext are latest from source: 
thanks

runme zip file link:  https://drive.google.com/open?id=14wkWK_F70KIqiTPwQ_4CAEba4mUvttV7

 

Send me EFCIs-iMac.zip

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
6 hours ago, bobamilk said:

Hi MaLd0n
I have a new setup which is i7-8700 + Asus Prime Z370-P + 8GB RAM with intel GPU only.  Everything works except the video.  At first, I kept the inject Intel GPU in config.plist while installed the IntelGraphicsFixup.kext and Lilu.kext but screen has lots of blocks tearing up, then after I disabled the injection in config.plist, the tearing become less, appears only when scrolling and playing youtube videos.  I tried to capture the screen but none of the screen shot shows the problem so I guess it's in the output.  Anyway, included my info and please help me making this work.  The System Report shows onw 7MB of video ram?  Also the boot up is incredibly slow despite it's on NVMe, compares to 5sec on the Windows part which is on a SATA SSD.  I followed this guide from tonymacx86 and pretty much use his EFI folder except all kext are latest from source:

runme zip file link:  https://drive.google.com/open?id=14wkWK_F70KIqiTPwQ_4CAEba4mUvttV7

 

Send me EFCIs-iMac.zip

CLOVER.zip

  • Like 2
Link to comment
Share on other sites
hackaro
hackaro
Posted
Posted

Hi Hi Mald0n,

 

I got some problems in having sleep/wakeup properly working with my TH3 after I added a dedicated SSDT. Everything else is working great. Here is my "SEND ME":

 

MY RIG

 

thanks in advance for your help! 

 

my best

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...