Jump to content

[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT

MaLd0n

By MaLd0n,
in Installation Guides

 Share
5,455 posts in this topic

Recommended Posts

Fr0d0
Fr0d0
Posted
Posted
17 hours ago, MaLd0n said:

https://www33.zippyshare.com/v/nWdzlBJe/file.html
the sleep problem is INTEL HD

You are a Hero¡¡¡

hdmi audio is working¡¡ and dsdt make all pci recognised....

sleep is not working but I can live without it.

 

I'm going to make a donation to your paypal right now, thank you so much MaLd0n

Link to comment
Share on other sites
Fr0d0
Fr0d0
Posted
Posted
23 minutes ago, Fr0d0 said:

You are a Hero¡¡¡

hdmi audio is working¡¡ and dsdt make all pci recognised....

sleep is not working but I can live without it.

 

I'm going to make a donation to your paypal right now, thank you so much MaLd0n

i forgot say that I have a problem un mounting network volumes. keeps in grey but don't unmount. before your magic was yet.

i had this problem with other Macs but I don't know how to resolve, do you know about this?

 

thanks

Link to comment
Share on other sites
Fr0d0
Fr0d0
Posted
Posted
47 minutes ago, Fr0d0 said:

i forgot say that I have a problem un mounting network volumes. keeps in grey but don't unmount. before your magic was yet.

i had this problem with other Macs but I don't know how to resolve, do you know about this?

 

thanks

seems to be a keychains issue. is not mackintosh problem. thank you¡¡¡¡

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, Fr0d0 said:

i forgot say that I have a problem un mounting network volumes. keeps in grey but don't unmount. before your magic was yet.

i had this problem with other Macs but I don't know how to resolve, do you know about this?

 

thanks

 

16 minutes ago, Fr0d0 said:

seems to be a keychains issue. is not mackintosh problem. thank you¡¡¡¡

welcome

 

IntelHD in some cases brke sleep, just live with it ;)

  • Like 2
Link to comment
Share on other sites
Olilen
Olilen
Posted
Posted
On 6/13/2018 at 6:48 AM, MaLd0n said:
On 6/13/2018 at 1:04 AM, Olilen said:

Hi MaLd0n,

 

You help me some days ago by providing me a clover.zip including a dsdt for my brand new build (Strix Z370-I, I7-8700K, no GPU).

It's been working great so far and I will make a donation (please provide link...). I had to disable power nap as system was rebooting overnight.

 

I have just (finally) received my GPU 1080ti and will plug it in...

Do I need a new DSDT or I simply install latest NVDIA web drivers, update the EFI config.plist and reboot ?

 

Attached is the report of my current and working set-up (without the GPU installed)

Send me MacOli.zip

Paypal is here

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S

 

use it and install web driver

CLOVER.zip

if have problems, tell me

 

Hi MaLd0n,

Well.... I have problems with this new clover.
I installed the GPU and latest web drivers.
- clover screen is all stretched up, then back to normal in the second part of macOS booting (when progress bar under the apple logo is half way through)
- once in macOS, graphic is super slow at time (mouse moves at ~5 fps), then seems ok, then slow again.
- crashes (black screen) when starting a OpenGL based app
- frequent "no partition" sign when rebooting. I need to switch off a wait for a while before restarting.

I desperately need your help there!
I cannot attach the sendme file. Upload doesn't seem to work anymore...

I put in on gdrive: https://drive.google.com/file/d/1KVonYcFOET2azfejnqe8CqeduQHclc0y/view?usp=sharing

 

Thanks for your help.

On 6/13/2018 at 6:48 AM, MaLd0n said:
On 6/13/2018 at 1:04 AM, Olilen said:

Hi MaLd0n,

 

You help me some days ago by providing me a clover.zip including a dsdt for my brand new build (Strix Z370-I, I7-8700K, no GPU).

It's been working great so far and I will make a donation (please provide link...). I had to disable power nap as system was rebooting overnight.

 

I have just (finally) received my GPU 1080ti and will plug it in...

Do I need a new DSDT or I simply install latest NVDIA web drivers, update the EFI config.plist and reboot ?

 

Attached is the report of my current and working set-up (without the GPU installed)

Send me MacOli.zip

Paypal is here

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RYQ6CGUGK5D6S

 

use it and install web driver

CLOVER.zip

if have problems, tell me

 

Hi MaLd0n,

Well.... I have problems with this new clover.
I installed the GPU and latest web drivers.
- clover screen is all stretched up, then back to normal in the second part of macOS booting (when progress bar under the apple logo is half way through)
- once in macOS, graphic is super slow at time (mouse moves at ~5 fps), then seems ok, then slow again.
- crashes (black screen) when starting a OpenGL based app
- frequent "no partition" sign when rebooting. I need to switch off a wait for a while before restarting.

I desperately need your help there!
I cannot attach the sendme file. Upload doesn't seem to work anymore...

I put in on gdrive: https://drive.google.com/file/d/1KVonYcFOET2azfejnqe8CqeduQHclc0y/view?usp=sharing

 

Thanks for your help.

Link to comment
Share on other sites
majoract100
majoract100
Posted
Posted (edited)

hi Maldon once again with new request

install Mojave on my 

GA-Z370M-D3H

cpu i5 8400

gpu intel UHD 630

 

I already installed High Sierra with your CLOVER folder. plz help in Mojave Installation

my Files Link Attached

 

https://www.dropbox.com/s/cnmu1om3jsyykhb/Send me HiBAs-iMac.zip?dl=0

Edited by majoract100
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
23 hours ago, Olilen said:

Hi MaLd0n,

Well.... I have problems with this new clover.
I installed the GPU and latest web drivers.
- clover screen is all stretched up, then back to normal in the second part of macOS booting (when progress bar under the apple logo is half way through)
- once in macOS, graphic is super slow at time (mouse moves at ~5 fps), then seems ok, then slow again.
- crashes (black screen) when starting a OpenGL based app
- frequent "no partition" sign when rebooting. I need to switch off a wait for a while before restarting.

I desperately need your help there!
I cannot attach the sendme file. Upload doesn't seem to work anymore...

I put in on gdrive: https://drive.google.com/file/d/1KVonYcFOET2azfejnqe8CqeduQHclc0y/view?usp=sharing

 

Thanks for your help.

Hi MaLd0n,

Well.... I have problems with this new clover.
I installed the GPU and latest web drivers.
- clover screen is all stretched up, then back to normal in the second part of macOS booting (when progress bar under the apple logo is half way through)
- once in macOS, graphic is super slow at time (mouse moves at ~5 fps), then seems ok, then slow again.
- crashes (black screen) when starting a OpenGL based app
- frequent "no partition" sign when rebooting. I need to switch off a wait for a while before restarting.

I desperately need your help there!
I cannot attach the sendme file. Upload doesn't seem to work anymore...

I put in on gdrive: https://drive.google.com/file/d/1KVonYcFOET2azfejnqe8CqeduQHclc0y/view?usp=sharing

 

Thanks for your help.

https://www46.zippyshare.com/v/qJK2lS4q/file.html
 

11 hours ago, maybay254 said:
  Hide contents

my specs: i7 8700k HD630

asrock z370 pro4

I have completed the installation Mac 10.14, HD630 1536MB. But have problem with pink screen

https://imgur.com/JeaRyw9

https://imgur.com/LWOiQga

 

wait new beta ;)

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
3 hours ago, majoract100 said:

hi Maldon once again with new request

install Mojave on my 

GA-Z370M-D3H

cpu i5 8400

gpu intel UHD 630

 

I already installed High Sierra with your CLOVER folder. plz help in Mojave Installation

my Files Link Attached

 

https://www.dropbox.com/s/cnmu1om3jsyykhb/Send me HiBAs-iMac.zip?dl=0

https://www57.zippyshare.com/v/BXmBxX2i/file.html
 

  • Like 3
Link to comment
Share on other sites
hamster163
hamster163
Posted
Posted

Hi MaLd0n, 

 

I wonder if you can help with DSDT. I installed High Sierra 10.13.5 with i5-8400 and B360 chipset. I am still struggling with a few post-installation issues as I mentioned in my installation guide post: https://www.insanelymac.com/forum/topic/334658-guide-high-sierra-10135-with-i5-8400-and-gigabyte-b360m-d3h-success-with-a-few-issues/. To summarize:

  • AppleALC audio kext caused shutdown/sleep issues (every time, computer would simply reboot instead of shutdown/sleep). VoodooHDA seemed to alleviate the problem, but the shutdown/sleep issue still appeared randomly (although not every time). 
  • No DVI output (only the iGPU Intel UHD 630 was used).

I hope a proper DSDT can resolve these issues. Here is the information that may be needed (I couldn't upload attachment, so I put them on Google Drive instead). Thanks!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, hamster163 said:

Hi MaLd0n, 

 

I wonder if you can help with DSDT. I installed High Sierra 10.13.5 with i5-8400 and B360 chipset. I am still struggling with a few post-installation issues as I mentioned in my installation guide post: https://www.insanelymac.com/forum/topic/334658-guide-high-sierra-10135-with-i5-8400-and-gigabyte-b360m-d3h-success-with-a-few-issues/. To summarize:

  • AppleALC audio kext caused shutdown/sleep issues (every time, computer would simply reboot instead of shutdown/sleep). VoodooHDA seemed to alleviate the problem, but the shutdown/sleep issue still appeared randomly (although not every time). 
  • No DVI output (only the iGPU Intel UHD 630 was used).

I hope a proper DSDT can resolve these issues. Here is the information that may be needed (I couldn't upload attachment, so I put them on Google Drive instead). Thanks!

try

https://www35.zippyshare.com/v/Us4MeCWi/file.html
 

  • Like 2
Link to comment
Share on other sites
hamster163
hamster163
Posted
Posted
4 hours ago, MaLd0n said:

try

https://www35.zippyshare.com/v/Us4MeCWi/file.html
 

 

Thank you very much! Here are my findings:

I also changed a few things:

  • Replaced apfs.epi with the patched apfs.epi for 10.13.5.
  • Replaced OsxAptioFixDrv-64.epi with AptioMemoryFix.epi from the latest Clover. (Otherwise system won't boot.) I read that AptioMemoryFix is now recommended from this post: https://www.insanelymac.com/forum/topic/304530-clover-change-explanations/?page=4&tab=comments#comment-2570653.
  • Added AppleALC.kext for audio.
  • Removed FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext. (Otherwise audio won't work; they seemed to cause conflict with AppleALC.)
  • In Clover configurations:
    • Unchecked -disablegfxfirmware because I saw this message in system log: "localhost kernel[0]: (kernel) IntelGraphicsFixup:    igfx @ -disablegfxfirmware is not necessary with IntelGraphicsFixup!".
    • Changed CsrActiveConfig back to 0x00 to enable SIP because some software requires it. 
    • Unchecked NvidiaWeb because I am using Intel iGPU.

There is still one remaining issue mentioned in my original post. There is no video output from the onboard DVI port. I could get video output from DVI at the Clover bootloader screen and also the macOS boot up screen (the one with the Apple logo and progress bar). However, video output stopped once the system desktop showed up, and I had to switched back to DisplayPort. Would love to get both ports working so that I can set up dual monitors. Below is my new Clover folder and result from RunMe.app:

Link to comment
Share on other sites
Ferrilu1
Ferrilu1
Posted
Posted (edited)

Mojave beta 2, all ok... but only monitor's color are wrong like purple. Monitor is connected via hdmi

I've another disc with Sierra and everything is fine

Clover and kext are updated. I've also tried to change rgb profile but nothing. With another monitor the same

I've an Asus H270 prime pro and on HD630, i5 7600k

thanks for your help

Edited by Ferrilu1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
7 hours ago, hamster163 said:

 

Thank you very much! Here are my findings:

I also changed a few things:

  • Replaced apfs.epi with the patched apfs.epi for 10.13.5.
  • Replaced OsxAptioFixDrv-64.epi with AptioMemoryFix.epi from the latest Clover. (Otherwise system won't boot.) I read that AptioMemoryFix is now recommended from this post: https://www.insanelymac.com/forum/topic/304530-clover-change-explanations/?page=4&tab=comments#comment-2570653.
  • Added AppleALC.kext for audio.
  • Removed FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext. (Otherwise audio won't work; they seemed to cause conflict with AppleALC.)
  • In Clover configurations:
    • Unchecked -disablegfxfirmware because I saw this message in system log: "localhost kernel[0]: (kernel) IntelGraphicsFixup:    igfx @ -disablegfxfirmware is not necessary with IntelGraphicsFixup!".
    • Changed CsrActiveConfig back to 0x00 to enable SIP because some software requires it. 
    • Unchecked NvidiaWeb because I am using Intel iGPU.

There is still one remaining issue mentioned in my original post. There is no video output from the onboard DVI port. I could get video output from DVI at the Clover bootloader screen and also the macOS boot up screen (the one with the Apple logo and progress bar). However, video output stopped once the system desktop showed up, and I had to switched back to DisplayPort. Would love to get both ports working so that I can set up dual monitors. Below is my new Clover folder and result from RunMe.app:

apfs.efi, just use ApfsDriverLoader.efi

 

OsxAptioFixDrv-64.efi, new mobos serie 300 have a problems with AptioMemoryFix, we use OsxAptioFixDrv-64.efi and EmuVariableUefi-64 for NVRAM work

 

AppleALC, u need check what layout id work for u, FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext work too for new mobos serie 300, just check layout id and change

 

-disablegfxfirmware, no diff, u can use kext and flag

 

 

1 hour ago, michael speed said:

I cannot get the hd630 working It only showing 7mb 

tried ig-platform 0x59120000, but the screen(HDMI) disconnects 

- GRAPHICS : Check InjectIntel
- GRAPHICS : “ig-platform-id” changed to 0x59120000
- DEVICES : “Fake ID” for IntelGFX changed to 0x59128086
- BOOT : Add “-disablegfxfirmware” under Custom Flags

1 hour ago, Ferrilu1 said:

Mojave beta 2, all ok... but only monitor's color are wrong like purple. Monitor is connected via hdmi

I've another disc with Sierra and everything is fine

Clover and kext are updated. I've also tried to change rgb profile but nothing. With another monitor the same

I've an Asus H270 prime pro and on HD630, i5 7600k

thanks for your help

it's common in Mojave beta, relax ;) 

  • Like 2
Link to comment
Share on other sites
Ferrilu1
Ferrilu1
Posted
Posted
2 hours ago, michael speed said:

I cannot get the hd630 working It only showing 7mb 

tried ig-platform 0x59120000, but the screen(HDMI) disconnects 

Hello I solved this with the right simbios, in my case iMac 18.1, tell me then please if the color of your screen ar right. Thanks

9 minutes ago, MaLd0n said:

apfs.efi, just use ApfsDriverLoader.efi

 

OsxAptioFixDrv-64.efi, new mobos serie 300 have a problems with AptioMemoryFix, we use OsxAptioFixDrv-64.efi and EmuVariableUefi-64 for NVRAM work

 

AppleALC, u need check what layout id work for u, FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext work too for new mobos serie 300, just check layout id and change

 

-disablegfxfirmware, no diff, u can use kext and flag

 

 

- GRAPHICS : Check InjectIntel
- GRAPHICS : “ig-platform-id” changed to 0x59120000
- DEVICES : “Fake ID” for IntelGFX changed to 0x59128086
- BOOT : Add “-disablegfxfirmware” under Custom Flags

it's common in Mojave beta, relax ;) 

 

Well hope so, many thanks

Link to comment
Share on other sites
michael speed
michael speed
Posted
Posted (edited)
2 hours ago, MaLd0n said:

 

 

- GRAPHICS : Check InjectIntel
- GRAPHICS : “ig-platform-id” changed to 0x59120000
- DEVICES : “Fake ID” for IntelGFX changed to 0x59128086
- BOOT : Add “-disablegfxfirmware” under Custom Flags

it's common in Mojave beta, relax ;) 

already tried, everything works until graphics fires up, and then the HDMI disconnects

 

MOBO 

i5 8400

H370m d3h

16gb corsair vengence 

WD SSD 250gb

 

i am trying on both High Sierra and Mojave

2 hours ago, Ferrilu1 said:

Hello I solved this with the right simbios, in my case iMac 18.1, tell me then please if the color of your screen ar right

Tried this SMBIOS, Not working untill now

Edited by michael speed
Link to comment
Share on other sites
majoract100
majoract100
Posted
Posted (edited)

Hi Maldon I downloaded and Use your files

 

my ioreg file attached

 graphics 1536mb but glitches and screen colour is totally pink. and audio not worked plz help.

 

 https://www.dropbox.com/s/i5kdddcgdo0jpkz/HiBA’s iMac.ioreg?dl=0

Edited by majoract100
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
1 hour ago, majoract100 said:

Hi Maldon I downloaded and Use your files

 

my ioreg file attached

 graphics 1536mb but glitches and screen colour is totally pink. and audio not worked plz help.

 

 https://www.dropbox.com/s/i5kdddcgdo0jpkz/HiBA’s iMac.ioreg?dl=0

try with iMac18,1

 

fo audio use layout id 7

37 minutes ago, DoJo said:

@MaLd0n

The DSDT for the Asus ROG Strix Z370-G Gaming motherboard you posted in the main post is the non-WiFi version?

is a very old bios version, need update it

  • Like 2
Link to comment
Share on other sites
majoract100
majoract100
Posted
Posted

Dear Maldon 

 

I try with imac18,1   and  imac17,1 on verbose mode reach to iconsoleUser and hang.

 

try with imac18,3  and imac18,2 graphics glitches and screen colour is totally pink.

and audio layout id 7 not working. plz help.

Link to comment
Share on other sites
DoJo
DoJo
Posted
Posted
2 hours ago, MaLd0n said:

try with iMac18,1

 

fo audio use layout id 7

is a very old bios version, need update it

 

I see. I'm asking because I'm thinking of buying it, as it seems to be the best mATX for compatibility with High Sierra. Do you remember which bios version you used to make this mobo DSDT?

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
35 minutes ago, majoract100 said:

Dear Maldon 

 

I try with imac18,1   and  imac17,1 on verbose mode reach to iconsoleUser and hang.

 

try with imac18,3  and imac18,2 graphics glitches and screen colour is totally pink.

and audio layout id 7 not working. plz help.

ID 7

https://www116.zippyshare.com/v/nXJ8ZD7H/file.html
 

video, is a beta problem

29 minutes ago, DoJo said:

 

I see. I'm asking because I'm thinking of buying it, as it seems to be the best mATX for compatibility with High Sierra. Do you remember which bios version you used to make this mobo DSDT?

send me files

RunMe.app

  • Like 2
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...