Harley Posted May 16, 2018 Share Posted May 16, 2018 (edited) 34 minutes ago, korlione2009 said: Harley try it. https://www.dropbox.com/s/yb3muh22md4rne7/EFI.zip?dl=0 bootKP.jpg 29 minutes ago, MaLd0n said: i think is something in ur clover folder Will dig deeper Thank you very much for your help 29 minutes ago, MaLd0n said: i use bios version F8a, serial port and csm disable, only it I got same bios & settings Edited May 16, 2018 by Harley Link to comment Share on other sites More sharing options...
korlione2009 Posted May 16, 2018 Share Posted May 16, 2018 15 minutes ago, Harley said: bootKP.jpg Will dig deeper Thank you very much for your help I got same bios & settings Harley try it. https://www.dropbox.com/s/wyubo3fd4yaus6c/EFI.zip?dl=0 Link to comment Share on other sites More sharing options...
Harley Posted May 16, 2018 Share Posted May 16, 2018 (edited) 8 minutes ago, korlione2009 said: Harley try it. bootKP3.jpg Sorry, didn't place new DSDT will try now Edited May 16, 2018 by Harley Link to comment Share on other sites More sharing options...
korlione2009 Posted May 16, 2018 Share Posted May 16, 2018 5 minutes ago, Harley said: bootKP3.jpg Sorry, didn't place new DSDT will try now Harley try it. https://www.dropbox.com/s/n286ex16445uhkv/EFI.zip?dl=0 Link to comment Share on other sites More sharing options...
Harley Posted May 16, 2018 Share Posted May 16, 2018 12 minutes ago, korlione2009 said: Harley try it. Wow! It's booting and actually have better IOReg than my previous setup! Thanks a lot man! But sleep... it goes to sleep but never wakes up. No power on USB apparently. Cannot wake it with mouse or keyboard. Power button doesn't work also. Only reset helps. Link to comment Share on other sites More sharing options...
MaLd0n Posted May 16, 2018 Author Share Posted May 16, 2018 @korlione2009 @Harley open one topic and continue tests there Here is a full DSDT patched topic Link to comment Share on other sites More sharing options...
Harley Posted May 16, 2018 Share Posted May 16, 2018 7 minutes ago, MaLd0n said: @korlione2009 @Harley open one topic and continue tests there Here is a full DSDT patched topic Sure Sorry 1 Link to comment Share on other sites More sharing options...
RandomTech Posted May 16, 2018 Share Posted May 16, 2018 7 hours ago, MaLd0n said: 9 hours ago, RandomTech said: Tried it, the system was booting very slowly till I got ''Prohibitory symbol''.. Didn't start. try remove a vega kext removed vega kext and now all working, sleep/wake, 3 display ports and system boot seems now OK. This is the IOreg now: https://www54.zippyshare.com/v/KMclpXIZ/file.html Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 26 minutes ago, RandomTech said: removed vega kext and now all working, sleep/wake, 3 display ports and system boot seems now OK. This is the IOreg now: https://www54.zippyshare.com/v/KMclpXIZ/file.html DSDT.aml.zip LAST SEND ME AFTER REBOOT 1 Link to comment Share on other sites More sharing options...
RandomTech Posted May 17, 2018 Share Posted May 17, 2018 56 minutes ago, MaLd0n said: LAST SEND ME AFTER REBOOT Everything working like never before its the best Hackintosh I've ever achieved with your help. Sorry it took me long time and changes/new installations only to solve the 8700K frequency problem, at the end I solve it by removing the internal DVD player which I had since Yosemite, now no problems at all CPU powermanagment works like in Windows or maybe even better. Much appreciate your time and help, to me it means a lot. If I correctly understand you need SendMe after reboot, if yes then here it is, if not then all good: https://www36.zippyshare.com/v/U0wfKk8P/file.html 1 Link to comment Share on other sites More sharing options...
bocajoe Posted May 17, 2018 Share Posted May 17, 2018 (edited) Awesome guide, thank you! I installed 10.13.2 fine, upgraded to 10.13.4 and my USB 3.0 ports don't work... Any ideas??? Also would a DSDT or SSDT be good for my setup? Not sure how to do either one but I see a lot of mention of it. I have attached my RunMe files if that helps. My Specs: Mac OS 10.13.4 • Gigabyte Z370p D3 • i5-8600k • Intel GD 630 • Samsung 960 EVO NVME SSD M.2 https://drive.google.com/file/d/14aN3MYd1TxBzmnc8iuoKnfyDeMYiIGOH/view?usp=sharing Edited May 17, 2018 by bocajoe 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 1 hour ago, RandomTech said: Everything working like never before its the best Hackintosh I've ever achieved with your help. Sorry it took me long time and changes/new installations only to solve the 8700K frequency problem, at the end I solve it by removing the internal DVD player which I had since Yosemite, now no problems at all CPU powermanagment works like in Windows or maybe even better. Much appreciate your time and help, to me it means a lot. If I correctly understand you need SendMe after reboot, if yes then here it is, if not then all good: https://www36.zippyshare.com/v/U0wfKk8P/file.html good Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 1 hour ago, bocajoe said: Awesome guide, thank you! I installed 10.13.2 fine, upgraded to 10.13.4 and my USB 3.0 ports don't work... Any ideas??? Also would a DSDT or SSDT be good for my setup? Not sure how to do either one but I see a lot of mention of it. I have attached my RunMe files if that helps. My Specs: Mac OS 10.13.4 • Gigabyte Z370p D3 • i5-8600k • Intel GD 630 • Samsung 960 EVO NVME SSD M.2 https://drive.google.com/file/d/14aN3MYd1TxBzmnc8iuoKnfyDeMYiIGOH/view?usp=sharing CLOVER.zip sleep and intelhd...not good xD 1 Link to comment Share on other sites More sharing options...
bocajoe Posted May 17, 2018 Share Posted May 17, 2018 23 minutes ago, MaLd0n said: CLOVER.zip sleep and intelhd...not good xD Excellent, THANK YOU!!!!! That seemed to do the trick! Question, I ran CineBench to test the i5-8600k CPU and it says it's 3 Cores, 6 Threads. It's supposed to be 6 Cores with 6 Threads. Maybe it's CineBench? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 3 minutes ago, bocajoe said: Excellent, THANK YOU!!!!! That seemed to do the trick! Question, I ran CineBench to test the i5-8600k CPU and it says it's 3 Cores, 6 Threads. It's supposed to be 6 Cores with 6 Threads. Maybe it's CineBench? Intel site say what a geekbench score? 1 Link to comment Share on other sites More sharing options...
bocajoe Posted May 17, 2018 Share Posted May 17, 2018 (edited) 6 minutes ago, MaLd0n said: Intel site say what a geekbench score? iMacPro1,1 - Geekbench Browser.pdf Edited May 17, 2018 by bocajoe Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 lol very good forget CineBench 1 Link to comment Share on other sites More sharing options...
bocajoe Posted May 17, 2018 Share Posted May 17, 2018 1 minute ago, MaLd0n said: lol very good forget CineBench OK well I guess I should be happy then. THANKS AGAIN MALDON! Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 2 minutes ago, bocajoe said: OK well I guess I should be happy then. THANKS AGAIN MALDON! welcome enjoy 1 Link to comment Share on other sites More sharing options...
pasha_infest Posted May 17, 2018 Share Posted May 17, 2018 Hi Maldon, i'v got the new hardware, installed mac os sierra 10.12.6, everything working, but native nvram don't, must use emuveriableuefi.efi , without this driver my huck can't reboot and shotdown, used latest aptiomemoryfix dont work for me, even with unlocked msr 0xE2, i have edited dsdt, and other stuff in my efi folder, so send you the runme.app output, please help if u can my hardware : Gigabyte B360M HD3, BIOS-F3, i3-8100, Intel UHD 630, 256GB SSD, 4GB DDR4 RAM - 10.12.6 (16G1314) DOWNLOAD Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 3 hours ago, pasha_infest said: Hi Maldon, i'v got the new hardware, installed mac os sierra 10.12.6, everything working, but native nvram don't, must use emuveriableuefi.efi , without this driver my huck can't reboot and shotdown, used latest aptiomemoryfix dont work for me, even with unlocked msr 0xE2, i have edited dsdt, and other stuff in my efi folder, so send you the runme.app output, please help if u can my hardware : Gigabyte B360M HD3, BIOS-F3, i3-8100, Intel UHD 630, 256GB SSD, 4GB DDR4 RAM - 10.12.6 (16G1314) DOWNLOAD CLOVER.zip send me new dump after reboot Link to comment Share on other sites More sharing options...
pasha_infest Posted May 17, 2018 Share Posted May 17, 2018 1 hour ago, MaLd0n said: CLOVER.zip send me new dump after reboot new dump with your clover folder+ clover f4 acpi dump DUMP Clover dump Link to comment Share on other sites More sharing options...
MaLd0n Posted May 17, 2018 Author Share Posted May 17, 2018 2 hours ago, pasha_infest said: new dump with your clover folder+ clover f4 acpi dump DUMP Clover dump what not work? why not high sierra? Link to comment Share on other sites More sharing options...
Mikentosh2016 Posted May 17, 2018 Share Posted May 17, 2018 (edited) I couldn't figure out how to boot into the internal drive without the thumb so I took a picture of 12 sections of Clover Configurator and its settings in the thumb and repeated the settings in the internal drive. Walla, it booted to the internal drive Edited May 18, 2018 by Mikentosh2016 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 18, 2018 Author Share Posted May 18, 2018 2 hours ago, Mikentosh2016 said: I couldn't figure out how to boot into the internal drive without the thumb so I took a picture of 12 sections of Clover Configurator and its settings in the thumb and did the repeated the settings in the internal drive. Walla, it booted to the internal drive after install post files here RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts