MaLd0n Posted April 14, 2018 Author Share Posted April 14, 2018 On 12/04/2018 at 11:25 AM, lance76 said: Hi MaLd0n, not sure if this is still how it's done but here goes. I installed High Sierra as per instructions but I am currently using a config.plist from a board that's not mine. The config is for an ASUS Z170 Pro but I got the Z170 Pro gaming with a I-6600k and an older NVIDIA GTX 660. As far as I can tell everything works except for the USB 3 in the back which only recognizes my external HDD after it went to sleep and woke up again. I also have some strange graphical artifacts every so often when I open a new app window. Anyway, here's the files from your RunMe app. SendMe Pack Thanks! https://www119.zippyshare.com/d/qrGexFS3/30128/CLOVER.zip On 12/04/2018 at 11:39 AM, vtec100000000rpm said: Thanks a lot ! I succeeded to boot from USB memory , and installed from USB memory to HDD with following settings. SMBIOS: iMac 13.2 (i5-3470) FakeCPUID: 0306A0 (IvyBridge) KernelXCPM: True (Couldn't boot without this check) But the second step of installing (boot from HDD) , it has got another error and aborted. I attempted to add FakePCIID.kext , but it didn't work.... Any idea ? config.plist u dont need a fakecpuid generate all info SMBIOS with Clover Configurator On 12/04/2018 at 2:27 PM, ogswra said: is there a DSDT for my mobo? asus z370 tuf plus gaming? u need post ur files, check first post On 13/04/2018 at 5:51 AM, Kynyo said: Hi @MaLd0n! is it necessary to apply those patches in config.plist from the 1st page if im using your DSDT and post install EFI folder for Z270-Gaming K3? Thanks, You're doing a great job! Yes, have a some dependencies with OEM SSDTs U can use it for good rename and solve dependencies problems change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 change GLAN to GIGE 474c 414e 4749 4745 1 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 14, 2018 Author Share Posted April 14, 2018 22 hours ago, vtec100000000rpm said: I succeeded to finish install with this config.plist. Thank you very much ! But at the 1st boot from HDD, " IOConsoleUsers: gIOScreenLockState 3 ..." error occured and looped. (This thread is the installation guide, so I go to another thread.) config.plist put one DGPU and disable IGPU 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 14, 2018 Author Share Posted April 14, 2018 17 minutes ago, fryysyd said: 请帮助我，谢谢！ RunMe.zip up here https://www.zippyshare.com/ 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 14, 2018 Author Share Posted April 14, 2018 13 minutes ago, fryysyd said: Please! Thanks! Send me TTdeiMac-3.zip https://www85.zippyshare.com/d/IZVLUMk3/2352/CLOVER.zip replace full clover folder, reboot and send me new SEND_ME Link to comment Share on other sites More sharing options...
lelet Posted April 14, 2018 Share Posted April 14, 2018 29 minutes ago, MaLd0n said: i'll check it, need a little time for it Take all the time you need, the Thunderbolt hotplug is a problem that many people have, I do not know if it's simple Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 @MaLd0n Gigabyte released Bios Firmware F6!! Can you help me? When I use SSDT-TB3 from this forum suggest. But the SSDT and your DSDT are having trouble when they work together. When I shut down, and the computer is restarted in 10-20sec later. If I do not use Device->USB uncheck. The computer will restart in 2-3sec later after shutdown. Is there any way I can fix it myself? or Could you help me? SSDT-Alpine-Ridge-TB3.aml DSDT.aml Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 6 minutes ago, buyjoey said: @MaLd0n Gigabyte released Bios Firmware F6!! Can you help me? When I use SSDT-TB3 from this forum suggest. But the SSDT and your DSDT are having trouble when they work together. When I shut down, and the computer is restarted in 10-20sec later. If I do not use Device->USB uncheck. The computer will restart in 2-3sec later after shutdown. Is there any way I can fix it myself? or Could you help me? SSDT-Alpine-Ridge-TB3.aml DSDT.aml u need extract original DSDT, press F4 key in clover boot screen, files generated in clover/acpi/origin 1 Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 (edited) 18 hours ago, MaLd0n said: u need extract original DSDT, press F4 key in clover boot screen, files generated in clover/acpi/origin Hi, @MaLd0n I hope you have some rest with my Beer present! :)) Thank you for always helping me buddy! So I just updated Bios F6 now. And just I said I have some issue about shutdown with SSDT-TB3 Please see my file. I pushed f4 in clover. So this one is good to go. https://www13.zippyshare.com/v/TUb7L1wR/file.html Thank you! Edited April 15, 2018 by buyjoey 1 Link to comment Share on other sites More sharing options...
giacomoleopardo Posted April 15, 2018 Share Posted April 15, 2018 Hello MaLd0n, my configuration: ASUS Z170i Pro Gaming ITX Intel Kaby Lake i7 7700 no discrete Graphics Bios version 3607 (latest) macOS High Sierra 10.13.4 - fresh install SMBios iMac 18,1 (the only one that works without discrete graphics on 10.13.4) Here's my Send me files https://www13.zippyshare.com/v/FZcSTT6I/file.html Thank you g. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 12 hours ago, buyjoey said: Hi, @MaLd0n I hope you have some rest with my Beer present! :)) Thank you for always helping me buddy! So I just updated Bios F6 now. And just I said I have some issue about shutdown with SSDT-TB3 Please see my file. I pushed f4 in clover. So this one is good to go. https://www13.zippyshare.com/v/TUb7L1wR/file.html Thank you! Joo Hyun Grace i don't apply TB https://www41.zippyshare.com/d/DSZaFE52/1002/CLOVER.zip dont use ssdt uiac at now, lets go without it after we add it with flag in clover *EDIT REMOVE WHATEVERGREEN IN FOLDER ABOVE, U DONT NEED IT 10 hours ago, giacomoleopardo said: Hello MaLd0n, my configuration: ASUS Z170i Pro Gaming ITX Intel Kaby Lake i7 7700 no discrete Graphics Bios version 3607 (latest) macOS High Sierra 10.13.4 - fresh install SMBios iMac 18,1 (the only one that works without discrete graphics on 10.13.4) Here's my Send me files https://www13.zippyshare.com/v/FZcSTT6I/file.html Thank you g. use updated app RunMe.app.zip 1 Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 59 minutes ago, MaLd0n said: i don't apply TB https://www41.zippyshare.com/d/DSZaFE52/1002/CLOVER.zip dont use ssdt uiac at now, lets go without it after we add it with flag in clover *EDIT REMOVE WHATEVERGREEN IN FOLDER ABOVE, U DONT NEED IT use updated app RunMe.app.zip Hi, @MaLd0n Thank you for the Files. I swap your Clover to mine and tested it. A few things I wonder so far, 1. shutdown does not work. 2. USB mapping is not correct. You said no SSDT-UIAC but I made it for correct USB mapping. Is there any reason for that? 3. My Dp Audio is not working now. It was working well with our appleALC.kext Grace Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 16 minutes ago, buyjoey said: Hi, @MaLd0n Thank you for the Files. I swap your Clover to mine and tested it. A few things I wonder so far, 1. shutdown does not work. 2. USB mapping is not correct. You said no SSDT-UIAC but I made it for correct USB mapping. Is there any reason for that? 3. My Dp Audio is not working now. It was working well with our appleALC.kext Grace https://www89.zippyshare.com/d/kKy9UczW/10911/CLOVER.zip send me one SEND_ME after reboot Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 11 minutes ago, MaLd0n said: https://www89.zippyshare.com/d/kKy9UczW/10911/CLOVER.zip send me one SEND_ME after reboot hi, again! Here is the link https://www66.zippyshare.com/v/3llvvvDy/file.html 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 13 minutes ago, buyjoey said: hi, again! Here is the link https://www66.zippyshare.com/v/3llvvvDy/file.html https://www60.zippyshare.com/d/tcdLgFeP/30342/CLOVER.zip the ssdt have some wrong patches shutdown work? fixed acpi errors now, after reboot new send me 1 Link to comment Share on other sites More sharing options...
gagaraz Posted April 15, 2018 Share Posted April 15, 2018 12 hours ago, giacomoleopardo said: Hi MaLd0n. Please help me with DSDT & Clover -ROG STRIX z370-F GAMING -8700k https://www5.zippyshare.com/v/9UwShE0S/file.html thank you very much. Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 Hi, No working. I see Whatevergreen and it work for Dp audio but my screen has one more fake screen. So I delete Whatevergreen. And works fine with monitors but no Audio. No shutdown work still. https://www108.zippyshare.com/v/OTtGIVcF/file.html 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 42 minutes ago, buyjoey said: Hi, No working. I see Whatevergreen and it work for Dp audio but my screen has one more fake screen. So I delete Whatevergreen. And works fine with monitors but no Audio. No shutdown work still. https://www108.zippyshare.com/v/OTtGIVcF/file.html Check if work DSDT.aml.zip the shutdown problem is caused by asmedia usb Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 13 minutes ago, MaLd0n said: Check if work DSDT.aml.zip the shutdown problem is caused by asmedia usb Good news and Bad news. DP audio working, Shutdown working. But No more PCI info and internal Audio. TT 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 10 minutes ago, buyjoey said: Good news and Bad news. DP audio working, Shutdown working. But No more PCI info and internal Audio. TT send me new SEND_ME with problems 1 Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 10 minutes ago, MaLd0n said: send me new SEND_ME with problems https://www1.zippyshare.com/v/KeMkrjQf/file.html Here we go! Thank you so much! Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 28 minutes ago, buyjoey said: https://www1.zippyshare.com/v/KeMkrjQf/file.html Here we go! Thank you so much! ur old clover folder, config.plist, etc kill _DSM, the problem is there 2 Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 22 minutes ago, MaLd0n said: ur old clover folder, config.plist, etc kill _DSM, the problem is there Ok, So I disabled the _DSM. now it killed my TB3 monitors functions. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 11 minutes ago, buyjoey said: Ok, So I disabled the _DSM. now it killed my TB3 monitors functions. DSDT.aml.zip 2 Link to comment Share on other sites More sharing options...
buyjoey Posted April 15, 2018 Share Posted April 15, 2018 9 minutes ago, MaLd0n said: DSDT.aml.zip Thanks @MaLd0n This one still have PCI but my TB3 back. I am so sorry for your time spending my system to work. I thought it would be easy to fix but I do not want you to spend more time for this. I might use one of your DSDT,. I do not care PCI info anymore. Thank you for your help!! You are the best! Link to comment Share on other sites More sharing options...
MaLd0n Posted April 15, 2018 Author Share Posted April 15, 2018 3 minutes ago, buyjoey said: Thanks @MaLd0n This one still have PCI but my TB3 back. I am so sorry for your time spending my system to work. I thought it would be easy to fix but I do not want you to spend more time for this. I might use one of your DSDT,. I do not care PCI info anymore. Thank you for your help!! You are the best! the problem is one_dsm, or rp21 _dsm(i kill it now) if dont work, is a _dsm in SSDT 1 Link to comment Share on other sites More sharing options...
Recommended Posts