MaLd0n Posted April 3, 2018 Author Share Posted April 3, 2018 45 minutes ago, ruki250 said: Duplicate graphics card and screen flickering after 10.13.4 update update clover and check if solve duplicate http://www56.zippyshare.com/v/Jz66M5ZA/file.html flick, yes, after 10.13.4 the problem appears again 3 hours ago, santes said: dear MaLd0n recently i updated to 10.13.4 update m i having issue with screen...its flickering as you know i have intel 630 graphics so will ya plz help me ? Link to comment Share on other sites More sharing options...
ruki250 Posted April 3, 2018 Share Posted April 3, 2018 57 minutes ago, MaLd0n said: update clover and check if solve duplicate http://www56.zippyshare.com/v/Jz66M5ZA/file.html flick, yes, after 10.13.4 the problem appears again Duplitate solved, thank you! How to fix screen flickering? The system is no longer usable.... Link to comment Share on other sites More sharing options...
Xanny Posted April 3, 2018 Share Posted April 3, 2018 (edited) 54 minutes ago, ruki250 said: Duplitate solved, thank you! How to fix screen flickering? The system is no longer usable.... Use imac 18,1 smbios Edited April 3, 2018 by Xanny Link to comment Share on other sites More sharing options...
ruki250 Posted April 3, 2018 Share Posted April 3, 2018 18 minutes ago, Xanny said: Use imac 18,1 smbios Already use imac 18,2. Is there any difference? Link to comment Share on other sites More sharing options...
Xanny Posted April 3, 2018 Share Posted April 3, 2018 (edited) 2 minutes ago, ruki250 said: Already use imac 18,2. Is there any difference? Yes 18,1 uses internal Intel and you'll never got flickering anymore, then if you'll buy a discrete graphics card you can go back to 18,2. Anyway my reply was to solve your issue Edited April 3, 2018 by Xanny Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 3, 2018 Share Posted April 3, 2018 (edited) Panic picture + files https://nofile.io/f/Xo0pDY2E8ht/CLOVER.IOREG.Runne.zip Mobo: GA-170m-ds3h SMBIO: iMac 17,1 Fix Airport in Clover cause panic, but AirportBrmFixup needs it. What is AirportBrmFixup.kext different from FakePCIID + FakePCIID_Broadcom.kext to get wifi? Edited April 3, 2018 by Hackmac101 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 3, 2018 Author Share Posted April 3, 2018 12 minutes ago, Hackmac101 said: Panic picture + files https://nofile.io/f/Xo0pDY2E8ht/CLOVER.IOREG.Runne.zip Mobo: GA-170m-ds3h SMBIO: iMac 17,1 Fix Airport in Clover cause panic, but AirportBrmFixup needs it. What is AirportBrmFixup.kext different from FakePCIID + FakePCIID_Broadcom.kext to get wifi? avoid use beta kexts, use release Link to comment Share on other sites More sharing options...
liemhatang Posted April 4, 2018 Share Posted April 4, 2018 9 hours ago, MaLd0n said: is just a kext, u need it I use it, but not work. Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 4, 2018 Share Posted April 4, 2018 26 minutes ago, MaLd0n said: avoid use beta kexts, use release I changed all kext to release version doesn't fix it. Clover generated a bad ACPI Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 1 hour ago, liemhatang said: I use it, but not work. the kext support ur lan model? 46 minutes ago, Hackmac101 said: I changed all kext to release version doesn't fix it. Clover generated a bad ACPI run my app and send me full dump, i need a full dump RunMe.app.zip Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 4, 2018 Share Posted April 4, 2018 (edited) The app has problem when dumping IOREG, 10.13.4 is my OS version: IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) Edited April 4, 2018 by Hackmac101 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 3 minutes ago, Hackmac101 said: The app has problem when dumping IOREG, 10.13.4 is my OS version: IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) u need wait finish without open apps or windows, just run , password and wait finish Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 4, 2018 Share Posted April 4, 2018 https://nofile.io/f/CSzB3Someg9/Send+me+Hackintosh.zip Turning off IORegExplorer auto-update fixed that. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 36 minutes ago, Hackmac101 said: https://nofile.io/f/CSzB3Someg9/Send+me+Hackintosh.zip Turning off IORegExplorer auto-update fixed that. use last clover version replace full folder, reboot and send me new dump CLOVER.zip Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 4, 2018 Share Posted April 4, 2018 https://nofile.io/f/3OjQGRAq0BA/Send+me+Hackintosh.zip Replace with your Clover, then updated to v4424, added apfs.efi and AptioMemFix.efi so I can boot. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 7 minutes ago, Hackmac101 said: https://nofile.io/f/3OjQGRAq0BA/Send+me+Hackintosh.zip Replace with your Clover, then updated to v4424, added apfs.efi and AptioMemFix.efi so I can boot. looks good, u need test all usb ports with usb3 device Dont need ssdt USB, use flag check Example Unused Ports, excluded with flag uia_exclude=HS01;HS02;HS05;HS06;HS07;HS13;HS14;SS03;SS04;SS05;SS06;SS09;SS10;USR1;USR2 test sleep Link to comment Share on other sites More sharing options...
Hackmac101 Posted April 4, 2018 Share Posted April 4, 2018 Thank you, MaLd0n, works good. I am able to boot with Airport Fix checked in Clover, with SSDT you added, without it I can't. Can you tell me why? Thank you for your time for helping me. Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 8 minutes ago, Hackmac101 said: Thank you, MaLd0n, works good. I am able to boot with Airport Fix checked in Clover, with SSDT you added, without it I can't. Can you tell me why? Thank you for your time for helping me. i rape DSDT remove many k lines, unused devices, etc u dont need airport fix in clover 1 Link to comment Share on other sites More sharing options...
multiymedia Posted April 4, 2018 Share Posted April 4, 2018 Hi Master MaLd0n, i follow your guide and the guide of Glassdood's with z370-g and i7 8700 resume of setup asus rog strix z370-g BIOS Ver. 0430 and i want to use your dsdt that you made. i7 8700K 3,7 64 GB RAM Crucial Ballistic 2400Mhz (patching in clover for full recognise) Nvida GTX 1060 6GB Nvme Samsung 960 250GB SSD Crucuial mx500 500gb And i could install without problems. but i have a question or problem: I use Noctua Ds15 cooler which is very large and does not let me put the graphics card in the first slot pcie. I put it in the one below. But it reports 8x. I have read that the plate supports 2x 16. Do you know if it is ok and according to the use you need, increase the number of lines? do you think you could do the dsdt and adjustments that you do to see if I conquer more performance besides avoiding kexts and patches? and why you dont want hardware sensors? it seems that is very difficukt to get it via dsdt, can you guide me pls? this is my sendme.zip https://drive.google.com/open?id=1pa-Nn5SfcDFRHbLTu9p0ZtbwkXEWguoN I reiterate my gratitude and I have been with my colleagues that when we make the machine work we will make a donation, as a thank you for the effort you make for the community¡¡ Link to comment Share on other sites More sharing options...
multiymedia Posted April 4, 2018 Share Posted April 4, 2018 10 minutes ago, multiymedia said: Hi Master MaLd0n, i follow your guide and the guide of Glassdood's with z370-g and i7 8700 resume of setup asus rog strix z370-g BIOS Ver. 0430 and i want to use your dsdt that you made. i7 8700K 3,7 64 GB RAM Crucial Ballistic 2400Mhz (patching in clover for full recognise) Nvida GTX 1060 6GB Nvme Samsung 960 250GB SSD Crucuial mx500 500gb And i could install without problems. but i have a question or problem: I use Noctua Ds15 cooler which is very large and does not let me put the graphics card in the first slot pcie. I put it in the one below. But it reports 8x. I have read that the plate supports 2x 16. Do you know if it is ok and according to the use you need, increase the number of lines? do you think you could do the dsdt and adjustments that you do to see if I conquer more performance besides avoiding kexts and patches? and why you dont want hardware sensors? it seems that is very difficukt to get it via dsdt, can you guide me pls? this is my sendme.zip https://drive.google.com/open?id=1pa-Nn5SfcDFRHbLTu9p0ZtbwkXEWguoN I reiterate my gratitude and I have been with my colleagues that when we make the machine work we will make a donation, as a thank you for the effort you make for the community¡¡ If i try to use the dsdt of your guide i get a forbidden symbol while boot.¿??¿?¿ Link to comment Share on other sites More sharing options...
MaLd0n Posted April 4, 2018 Author Share Posted April 4, 2018 28 minutes ago, multiymedia said: If i try to use the dsdt of your guide i get a forbidden symbol while boot.¿??¿?¿ replace full clover folder, reboot and send me new dumps CLOVER.zip Link to comment Share on other sites More sharing options...
multiymedia Posted April 4, 2018 Share Posted April 4, 2018 Do I need to update clover bootloader? I have version 4359 and the bios? 12 minutes ago, MaLd0n said: replace full clover folder, reboot and send me new dumps CLOVER.zip Link to comment Share on other sites More sharing options...
multiymedia Posted April 4, 2018 Share Posted April 4, 2018 your magic works now all pci shows in system profile now i need to find the way to enable audio by the hdmi or displayport of the gtx 1060 and the laggy nvidia driver, what is the best method to solve? as there are many scripts available. thank you so much. Link to comment Share on other sites More sharing options...
multiymedia Posted April 4, 2018 Share Posted April 4, 2018 3 minutes ago, multiymedia said: your magic works now all pci shows in system profile now i need to find the way to enable audio by the hdmi or displayport of the gtx 1060 and the laggy nvidia driver, what is the best method to solve? as there are many scripts available. thank you so much. I forgot ¿what I do with the express pcie for gtx1060?. the system profile says it is 8x. is connected in the second pci because the heatsink (noctua ds15) will not let me place it in the top one. should change in bios somtehing or is ok? Link to comment Share on other sites More sharing options...
telepati Posted April 4, 2018 Share Posted April 4, 2018 @MaLd0n I have slow boot problem could you please check my files? Send me Murats-Mac.zip Link to comment Share on other sites More sharing options...
Recommended Posts