MaLd0n Posted March 29, 2018 Author Share Posted March 29, 2018 1 hour ago, zzmadd said: That's the Apple Keyboard Hub. Sleep already didn't function prior to connecting the keyboard to the Mac. I had to connect it because after the new dsdt and the sleep attempt the bluetooth devices were no longer working. As you said I had to Wake using the power button. But since the machine didn't Sleep I couldn't press the power button to Wake it. So bluetooth no longer worked and I had to plug a USB keyboard. Hope it's clear. try to change ports to 255 inside usbinjectall kexts, like ur old ssdt USB 1 hour ago, bocajoe said: Never Mind... I figured it out. I was using the Green connector in the back, on this motherboard it is the orange connector. EVERYTHING IS WORKING FINE!!!!!! Thanks for all you do Maldon! Welcome! Enjoy! 1 Link to comment Share on other sites More sharing options...
zzmadd Posted March 29, 2018 Share Posted March 29, 2018 (edited) 28 minutes ago, MaLd0n said: try to change ports to 255 inside usbinjectall kexts, like ur old ssdt USB I tried but it makes no difference. The PC wakes instantly even if I unplug the USB cable of the PCIe board. I guess there's something prior to USB. Edited March 29, 2018 by zzmadd Link to comment Share on other sites More sharing options...
MaLd0n Posted March 30, 2018 Author Share Posted March 30, 2018 4 hours ago, zzmadd said: I tried but it makes no difference. The PC wakes instantly even if I unplug the USB cable of the PCIe board. I guess there's something prior to USB. is a very strange, i don't have idea Link to comment Share on other sites More sharing options...
ryanonit Posted March 30, 2018 Share Posted March 30, 2018 (edited) Hi MaLd0N. I am a very noob on Hackintosh so I tried to follow a build for people's recommendation. My spec is Gigabyte Z370 Aorus Gaming 7 8700K Samsung NVME 960 Pro 512GB Crucial DDR4 2133 8GB x 2 ASUS AC68 Wifi Corsair HX850 Powersupply Cooler Master LiquidMaster 280 Pro 3TB WD & Seagate Sata HDD Samsung 840 Pro 250GB BIOS SETTINGS Fast Boot : Disabled PAN PXE Boot Option ROM : Disabled Storage Boot Option Control : UEFI Trusted Computing -> Security Device Support : Disabled Network Stack : Disabled Legacy USB Support : Auto XHCI Hand-off : Enabled Wake on LAN : Disabled Vt-d : Disabled (Enable it?) IOAPIC 24-119 : Enabled Integrated Graphics : Enabled ( Disable it?) I just copied and pasted someone's EFI folder and somehow it works but it is a bit laggy RAM is 16GB but show as 32GB Also can I delete 'Install from HACKINTOSH(My HDD name)' option from booting? I tried to attach but file is bigger than 10MB so I created a link to download. https://www.dropbox.com/s/17jh1v39o1h6lfu/EFI.zip?dl=0 Would you please have a look? Thank you. Edited March 30, 2018 by ryanonit Link to comment Share on other sites More sharing options...
zzmadd Posted March 30, 2018 Share Posted March 30, 2018 5 hours ago, MaLd0n said: is a very strange, i don't have idea If the Master doesn't know... Link to comment Share on other sites More sharing options...
korlione2009 Posted March 30, 2018 Share Posted March 30, 2018 Members https://www.dropbox.com/s/iekc1jzsw7kkak0/EFI.zip?dl=0 Link to comment Share on other sites More sharing options...
szuszinho Posted March 30, 2018 Share Posted March 30, 2018 Hi, I can't install HS. Tried config.plist from first post as well. Link to comment Share on other sites More sharing options...
korlione2009 Posted March 30, 2018 Share Posted March 30, 2018 What kind of motherboard do you have? Link to comment Share on other sites More sharing options...
korlione2009 Posted March 30, 2018 Share Posted March 30, 2018 Members https://www.dropbox.com/s/en2b7xoohkeceeu/Gigabyte Z370 AORUS Gaming 7 Hackintosh Build Guide - Hackintosher.pdf.zip?dl=0 Link to comment Share on other sites More sharing options...
zzmadd Posted March 30, 2018 Share Posted March 30, 2018 (edited) 11 hours ago, MaLd0n said: is a very strange, i don't have idea BTW, what did you do to fix the Shut Down issue? Edited March 30, 2018 by zzmadd Link to comment Share on other sites More sharing options...
MaLd0n Posted March 30, 2018 Author Share Posted March 30, 2018 7 hours ago, ryanonit said: Hi MaLd0N. I am a very noob on Hackintosh so I tried to follow a build for people's recommendation. My spec is Gigabyte Z370 Aorus Gaming 7 8700K Samsung NVME 960 Pro 512GB Crucial DDR4 2133 8GB x 2 ASUS AC68 Wifi Corsair HX850 Powersupply Cooler Master LiquidMaster 280 Pro 3TB WD & Seagate Sata HDD Samsung 840 Pro 250GB BIOS SETTINGS Fast Boot : Disabled PAN PXE Boot Option ROM : Disabled Storage Boot Option Control : UEFI Trusted Computing -> Security Device Support : Disabled Network Stack : Disabled Legacy USB Support : Auto XHCI Hand-off : Enabled Wake on LAN : Disabled Vt-d : Disabled (Enable it?) IOAPIC 24-119 : Enabled Integrated Graphics : Enabled ( Disable it?) I just copied and pasted someone's EFI folder and somehow it works but it is a bit laggy RAM is 16GB but show as 32GB Also can I delete 'Install from HACKINTOSH(My HDD name)' option from booting? I tried to attach but file is bigger than 10MB so I created a link to download. https://www.dropbox.com/s/17jh1v39o1h6lfu/EFI.zip?dl=0 Would you please have a look? Thank you. u need post a ful dump, check first post Link to comment Share on other sites More sharing options...
bocajoe Posted March 30, 2018 Share Posted March 30, 2018 (edited) Wow, thanks for all you do Maldon! GA-Z170ZP-SLI, i5-6700k, Asus RX460 4gb working perfectly 10.13.4 thanks to this wonderful guide! Only issue is USB 3.0 is not working, only USB 2.0. Wondering if you can help? I have attached my clover and RunMe results. Thanks Maldon!!!!!! Cloverhttps://drive.google.com/file/d/11o3VUUV7_iZTVNjRf-lqHOzK_XBYHSHu/view?usp=sharing RunMe Resultshttps://drive.google.com/file/d/11AYox5CIqLfbI9l9Zl7dM0bcq-tc6O7B/view?usp=sharing Edited March 30, 2018 by bocajoe Link to comment Share on other sites More sharing options...
MaLd0n Posted March 30, 2018 Author Share Posted March 30, 2018 14 minutes ago, bocajoe said: Wow, thanks for all you do Maldon! GA-Z170ZP-SLI, i5-6700k, Asus RX460 4gb working perfectly 10.13.4 thanks to this wonderful guide! Only issue is USB 3.0 is not working, only USB 2.0. Wondering if you can help? I have attached my clover and RunMe results. Thanks Maldon!!!!!! Cloverhttps://drive.google.com/file/d/11o3VUUV7_iZTVNjRf-lqHOzK_XBYHSHu/view?usp=sharing RunMe Resultshttps://drive.google.com/file/d/11AYox5CIqLfbI9l9Zl7dM0bcq-tc6O7B/view?usp=sharing need a new patch com.apple.driver.usb.AppleUSBXHCI 837D940F 0F839704 0000 837D940F 90909090 9090 USB 10.13.4+ by PMHeart 10.13.x 1 Link to comment Share on other sites More sharing options...
bocajoe Posted March 31, 2018 Share Posted March 31, 2018 (edited) 3 hours ago, MaLd0n said: need a new patch 837D940F 0F839704 0000 837D940F 90909090 9090 USB 10.13.4+ by PMHeart 10.13.x Thank you Maldon. Not sure if I did it right... but I opened my config.plist in clover configurator and copied and pasted 837D940F 0F839704 0000 837D940F 90909090 9090 USB 10.13.4+ by PMHeart 10.13.x in com.apple.driver.usb.AppleUSBXHCI (see pic below). I also checked and unchecked infoPlistPatch but still no USB 3.0. Any ideas? I attached my config.plist if it helps. Specs: GA-Z170XP-SLI, i5-7600k, Asus RX460 4GB, 17,1 SMBIOS config.plist.zip Edited March 31, 2018 by bocajoe Link to comment Share on other sites More sharing options...
ryanonit Posted March 31, 2018 Share Posted March 31, 2018 (edited) 19 hours ago, MaLd0n said: u need post a ful dump, check first post How do I get full dump? Please let me know how I get it. Edited March 31, 2018 by ryanonit 1 Link to comment Share on other sites More sharing options...
aerz Posted March 31, 2018 Share Posted March 31, 2018 18 minutes ago, ryanonit said: How do I get full dump? Shutdown your PC, turn on and press F4 key when you watched the Clover bootloader screen. Then mount the EFI partition and go to /EFI/EFI/CLOVER/ACPI/origin/ put this folder on a .zip file and post it here. 1 Link to comment Share on other sites More sharing options...
rob88v Posted March 31, 2018 Share Posted March 31, 2018 (edited) Hackintosh Specs: GA-Z270X Ultra Gaming MB i7-7700K @ 4.8Ghz 32 GB Crucial Ballistix DDR4 Ram Gigabyte Aorus GTX 1080Ti 11 GB 1 TB Samsung 960 EVO NVME Drive - MacOS 1 TB Samsung 850 EVO SSD- Storage 3 TB WD Black- Time Machine Backups Broadcom Wifi/BT Card BCM94360CD EVGA Supernova G3 850 W PSU Corsair H100i v2 Water Cooler MaLd0n I wanted to know if a DSDT could be created for my system board mainly for additional stability. SendMe results https://www.dropbox.com/s/5m5srk2k5mz8hg4/Send me Seans-Hack-Pro.zip?dl=0 Config plist attached as well Thank you in advance. config.plist Edited March 31, 2018 by rob88v Link to comment Share on other sites More sharing options...
MaLd0n Posted March 31, 2018 Author Share Posted March 31, 2018 16 hours ago, bocajoe said: Thank you Maldon. Not sure if I did it right... but I opened my config.plist in clover configurator and copied and pasted 837D940F 0F839704 0000 837D940F 90909090 9090 USB 10.13.4+ by PMHeart 10.13.x in com.apple.driver.usb.AppleUSBXHCI (see pic below). I also checked and unchecked infoPlistPatch but still no USB 3.0. Any ideas? I attached my config.plist if it helps. Specs: GA-Z170XP-SLI, i5-7600k, Asus RX460 4GB, 17,1 SMBIOS config.plist.zip extract original tables with F4 key in clover boot screen and run my app after it, send me files 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 31, 2018 Author Share Posted March 31, 2018 3 hours ago, rob88v said: Hackintosh Specs: GA-Z270X Ultra Gaming MB i7-7700K @ 4.8Ghz 32 GB Crucial Ballistix DDR4 Ram Gigabyte Aorus GTX 1080Ti 11 GB 1 TB Samsung 960 EVO NVME Drive - MacOS 1 TB Samsung 850 EVO SSD- Storage 3 TB WD Black- Time Machine Backups Broadcom Wifi/BT Card BCM94360CD EVGA Supernova G3 850 W PSU Corsair H100i v2 Water Cooler MaLd0n I wanted to know if a DSDT could be created for my system board mainly for additional stability. SendMe results https://www.dropbox.com/s/5m5srk2k5mz8hg4/Send me Seans-Hack-Pro.zip?dl=0 Config plist attached as well Thank you in advance. config.plist CLOVER.zip Link to comment Share on other sites More sharing options...
alex9440 Posted March 31, 2018 Share Posted March 31, 2018 MaLd0n Hello! I added his BCM943602CS Broadcom Wireless WiFi Card do I need to change something in the DSDT? For some reason, was off a very long and appeared hanging system! And I can not raise HD630, IQSV does not work do not know what it can be the result of something messed up can be ! Can I ask you to look at my files? Sorry for my bad english!! Link to comment Share on other sites More sharing options...
p4antonio Posted March 31, 2018 Share Posted March 31, 2018 Hello MaLd0n can you check if the EFI is well created? thank you. PC configuration: Pentium 4560 / GA-B250M-DS3H / Ram 2x8Gb DRR4 2400Mhz / Asus gtx 660 ti 2gb. installed:OS X 10.12.6 (16G29). I am attaching you to RunMe. https://drive.google.com/open?id=1avdABvxnG6rqymjeM5uHs3e6bCW93l71 Link to comment Share on other sites More sharing options...
bocajoe Posted April 1, 2018 Share Posted April 1, 2018 (edited) 11 hours ago, MaLd0n said: extract original tables with F4 key in clover boot screen and run my app after it, send me files Hello Maldon! And thanks for taking the time to help. Below is my results of RunMeApp for my problem with USB 3.0 not working in 10.13.4. https://drive.google.com/file/d/15rjjUGOtbzLO0Bz6x2NSagNCcAfTj2O3/view?usp=sharing Specs: GA-Z170ZP-SLI, i5-6700k, Asus RX460 4gb Edited April 1, 2018 by bocajoe Link to comment Share on other sites More sharing options...
MaLd0n Posted April 1, 2018 Author Share Posted April 1, 2018 44 minutes ago, bocajoe said: Hello Maldon! And thanks for taking the time to help. Below is my results of RunMeApp for my problem with USB 3.0 not working in 10.13.4. https://drive.google.com/file/d/15rjjUGOtbzLO0Bz6x2NSagNCcAfTj2O3/view?usp=sharing Specs: GA-Z170ZP-SLI, i5-6700k, Asus RX460 4gb take a shot DSDT.aml.zip use usb patch limit port for 10.13.4 Link to comment Share on other sites More sharing options...
MaLd0n Posted April 1, 2018 Author Share Posted April 1, 2018 6 hours ago, p4antonio said: Hello MaLd0n can you check if the EFI is well created? thank you. PC configuration: Pentium 4560 / GA-B250M-DS3H / Ram 2x8Gb DRR4 2400Mhz / Asus gtx 660 ti 2gb. installed:OS X 10.12.6 (16G29). I am attaching you to RunMe. https://drive.google.com/open?id=1avdABvxnG6rqymjeM5uHs3e6bCW93l71 http://www17.zippyshare.com/v/85WBmV4t/file.html 10 hours ago, alex9440 said: MaLd0n Hello! I added his BCM943602CS Broadcom Wireless WiFi Card do I need to change something in the DSDT? For some reason, was off a very long and appeared hanging system! And I can not raise HD630, IQSV does not work do not know what it can be the result of something messed up can be ! Can I ask you to look at my files? Sorry for my bad english!! just plug Link to comment Share on other sites More sharing options...
Rafeh Posted April 1, 2018 Share Posted April 1, 2018 HP X360 13 A010DX DSDT FIX NEEDED, Complete info. https://drive.google.com/open?id=1T0_W4XMZHVJlDCCPpsvN1Li3lirRN33y Link to comment Share on other sites More sharing options...
Recommended Posts