Pluskat5000Schiffe Posted March 19, 2018 Share Posted March 19, 2018 Hi MaLd0n, Recently I build this new setup, which was basically founded of my previous system (6700k). So I think a lot can be optimized. I'm missing DSDT and SSDT patches. Most is arranged in clover with the appropriate paches. The problem I have is that the system gets slow after a while. Especially the graphics are lagging (I'm aware of the poor Nvidia dirvers so I rolled them back already). So I hope you find optimisations to speed up the system and also a good staring point for future hacks because I'm not planning any upgrade next coming years. Can you please look into my upload if you can find some errors / optimisations? Hans-Beast-Hackintosh-i7-8700K.zip Thanks! 1 Link to comment Share on other sites More sharing options...
themorb Posted March 19, 2018 Share Posted March 19, 2018 (edited) 11 hours ago, MaLd0n said: use last version Many thanks, It works, not really quite but it's working. I had to download again HSierra, created a new stick, bios upgrade. Trying to patch dsdt!! (is this the same as the one on el capitan or i need on High Sierra a new one??) Edited March 19, 2018 by themorb Link to comment Share on other sites More sharing options...
MaLd0n Posted March 19, 2018 Author Share Posted March 19, 2018 5 hours ago, genzai said: Hello @MaLd0n, Here is my sendme info again. this is already based on your work not long ago. But i have enabled iGPU in headless mode, which is working well so maybe it needs nothing new. But also wondering about your recent work with Z370 and if it can be applied to improve my ACPI. Thanks! g\ https://www.dropbox.com/s/08gch5uzmumafif/Send me GustavMahlerIII.zip?dl=0 Z370 Aurous Gaming 7, GTX 1080ti, TB3, UHD630 (headless acceleration working) the problem is: we need some time, removed devices, reboot, test check my DSDT DSDT.MaLd0n serie 300.zip U need check log, see erros and rape table Link to comment Share on other sites More sharing options...
MaLd0n Posted March 19, 2018 Author Share Posted March 19, 2018 2 hours ago, Pluskat5000Schiffe said: Hi MaLd0n, Recently I build this new setup, which was basically founded of my previous system (6700k). So I think a lot can be optimized. I'm missing DSDT and SSDT patches. Most is arranged in clover with the appropriate paches. The problem I have is that the system gets slow after a while. Especially the graphics are lagging (I'm aware of the poor Nvidia dirvers so I rolled them back already). So I hope you find optimisations to speed up the system and also a good staring point for future hacks because I'm not planning any upgrade next coming years. Can you please look into my upload if you can find some errors / optimisations? Hans-Beast-Hackintosh-i7-8700K.zip Thanks! replace full folder, reboot, send me new dumps CLOVER.zip 1 hour ago, themorb said: Many thanks, It works, not really quite but it's working. I had to download again HSierra, created a new stick, bios upgrade. Trying to patch dsdt!! (is this the same as the one on el capitan or i need on High Sierra a new one??) extract new files, i patched for u 1 1 Link to comment Share on other sites More sharing options...
themorb Posted March 19, 2018 Share Posted March 19, 2018 41 minutes ago, MaLd0n said: replace full folder, reboot, send me new dumps CLOVER.zip extract new files, i patched for u Any issue with graphic? everything flow really SLOW Link to comment Share on other sites More sharing options...
bluenote56 Posted March 19, 2018 Share Posted March 19, 2018 19 hours ago, MaLd0n said: just use ESP, legacy or not, error don't appear I must do something wrong. I strictly followed your instructions, installing Clover as you said (picture)in esp . I always get a boot0 error and I'm forced to boot from usb. I don't know why. Actually I can say that everything works but bluetooth and wifi (of course) and that I can't adjust brightness though I installed Native display. Buttons work (shift F1 and F2) but nothing changes but this thing it's a p.i.t.a. I would like to boot from laptop. Thanks for your help as usual. Link to comment Share on other sites More sharing options...
MaLd0n Posted March 19, 2018 Author Share Posted March 19, 2018 Just now, bluenote56 said: I must do something wrong. I strictly followed your instructions, installing Clover as you said (picture)in esp . I always get a boot0 error and I'm forced to boot from usb. I don't know why. Actually I can say that everything works but bluetooth and wifi (of course) and that I can't adjust brightness though I installed Native display. Buttons work (shift F1 and F2) but nothing changes but this thing it's a p.i.t.a. I would like to boot from laptop. Thanks for your help as usual. Use a fresh install and after use boot0ss ESP or uefi Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 19, 2018 Share Posted March 19, 2018 1 hour ago, MaLd0n said: replace full folder, reboot, send me new dumps CLOVER.zip extract new files, i patched for u Results after replacement with your files https://we.tl/7LYJZvOz9R Thanks for your help! 1 Link to comment Share on other sites More sharing options...
41089 Posted March 19, 2018 Share Posted March 19, 2018 (edited) Hey MaLd0n, I've slightly upgraded my build would it be possible to get a new DSDT? 41089 imac march.zip Edited March 19, 2018 by 41089 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 19, 2018 Author Share Posted March 19, 2018 52 minutes ago, Pluskat5000Schiffe said: Results after replacement with your files https://we.tl/7LYJZvOz9R Thanks for your help! looks good, just add more two patches in config.plist EC0 to EC 4543 305f 4543 5f5f GLAN to GIGE 474c 414e 4749 4745 9 minutes ago, 41089 said: Hey MaLd0n, I've slightly upgraded my build would it be possible to get a new DSDT? 41089 imac march.zip without many things, but looks good 2 Link to comment Share on other sites More sharing options...
41089 Posted March 19, 2018 Share Posted March 19, 2018 awesome, thanks 1 Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 19, 2018 Share Posted March 19, 2018 28 minutes ago, MaLd0n said: looks good, just add more two patches in config.plist EC0 to EC 4543 305f 4543 5f5f GLAN to GIGE 474c 414e 4749 4745 without many things, but looks good Thanks Mald0n! Can you tell me briefly what has been optimised compared to the situation before your additions? Also, I still have a problem with the wake from sleep. When it wakes from sleep the hack is alive but the Dell P2715Q 4K screen fails to display anything and enters soon to power safe mode. I have to reboot the hack again in this situation. I read a lot of this issue and I disabled sleep but I really interested in a sleep / awake fix if there is any. It has to do with the DisplayPort 1.2 if I remember correctly. Can you possible fix this? Does the HD630 of the 8700K maybe help when its added to the hack? At this moment its disabled and runs it on discrete graphics only. Link to comment Share on other sites More sharing options...
MaLd0n Posted March 19, 2018 Author Share Posted March 19, 2018 9 minutes ago, Pluskat5000Schiffe said: Thanks Mald0n! Can you tell me briefly what has been optimised compared to the situation before your additions? Also, I still have a problem with the wake from sleep. When it wakes from sleep the hack is alive but the Dell P2715Q 4K screen fails to display anything and enters soon to power safe mode. I have to reboot the hack again in this situation. I read a lot of this issue and I disabled sleep but I really interested in a sleep / awake fix if there is any. It has to do with the DisplayPort 1.2 if I remember correctly. Can you possible fix this? Does the HD630 of the 8700K maybe help when its added to the hack? At this moment its disabled and runs it on discrete graphics only. i see others users with same problem with 4k u can se both gpus for hardware acceleration -IntelGFX 0x59128086 -InjectIntel -ig-platform-id 0x59120003 -IntelGraphics enable in bios -DVMT to 128 -IntelGraphicsFixup.kext Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 19, 2018 Share Posted March 19, 2018 (edited) 7 hours ago, MaLd0n said: i see others users with same problem with 4k u can se both gpus for hardware acceleration ... Intel UHD Graphics appears visible under Hardware\PCI However VDADecoderChecker gives an error: GVA info: Successfully connected to the Intel plugin, offline Gen95 An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process. VDADecoderCreate failed. err: -12473 I tried a Bootarch "shikigva=12" but no difference and causes iTunes to crash, "shikigva=4" no difference and iTunes stable. Thanks! P.S. the wake from sleep is solved... you never believe it... I had always used the equipped Dell cable. This was a Displayport to Mini DisplayPort Cable. I swapped it for a DisplayPort to Displayport Cable and wake from sleep is working... This is so terrible stupid but I'm so glad I found the issue! Celebrated to soon ... Sometimes it still doesn't wake it looks cable related because with original I can't wake at all. The older cable does... sometimes... Edited March 20, 2018 by Pluskat5000Schiffe 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 20, 2018 Author Share Posted March 20, 2018 1 hour ago, Pluskat5000Schiffe said: Intel UHD Graphics appears visible under Hardware\PCI However VDADecoderChecker gives an error: GVA info: Successfully connected to the Intel plugin, offline Gen95 An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process. VDADecoderCreate failed. err: -12473 I tried a Bootarch "shikigva=12" but no difference and causes iTunes to crash, "shikigva=4" no difference and iTunes stable. Thanks! P.S. the wake from sleep is solved... you never believe it... I had always used the equipped Dell cable. This was a Displayport to Mini DisplayPort Cable. I swapped it for a DisplayPort to Displayport Cable and wake from sleep is working... This is so terrible stupid but I'm so glad I found the issue! Celebrated to soon ... Sometimes it still doesn't wake it looks cable related because with original I can't wake at all. The older cable does... sometimes... work for me -IntelGFX 0x59128086 -InjectIntel -ig-platform-id 0x59120003 -IntelGraphics enable in bios -DVMT 128 -IntelGraphicsFixup.kext -Shiki.kext dont need flag shikigva with last Shiki version Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 20, 2018 Share Posted March 20, 2018 29 minutes ago, MaLd0n said: It looks different. @my IGPU@2 I have 2 times AppleGraphicsDeviceControlClient. Is that related with the amount ports? Thanks! How can I verify if Encode / Decode works ok with UHD630? Link to comment Share on other sites More sharing options...
MaLd0n Posted March 20, 2018 Author Share Posted March 20, 2018 1 minute ago, Pluskat5000Schiffe said: It looks different. @my IGPU@2 I have 2 times AppleGraphicsDeviceControlClient. Is that related with the amount ports? Thanks! How can I verify if Encode / Decode works ok with UHD630? check with MacX Video Converter Pro.app Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 20, 2018 Share Posted March 20, 2018 37 minutes ago, MaLd0n said: check with MacX Video Converter Pro.app I see nVidia GT1080Ti only there so its not working correctly. Can you please look into my clover files if I mistyped or forgot something? https://we.tl/YQ2srimo5h Cheers! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 20, 2018 Author Share Posted March 20, 2018 56 minutes ago, Pluskat5000Schiffe said: I see nVidia GT1080Ti only there so its not working correctly. Can you please look into my clover files if I mistyped or forgot something? https://we.tl/YQ2srimo5h Cheers! i think is a bios config or smbios, i use iMacPro and beta 10.13.4 u need a tests Link to comment Share on other sites More sharing options...
iSoul01 Posted March 20, 2018 Share Posted March 20, 2018 Hey there! Could you pls take a look on my results, is there something else to do to improve? H/W: Asrock H110M-HDS, G4560, GTX650, 8GB, SSD Sata, TV connected by HDMI (with sound) Running 10.12.6, seems good I have tried all guides High Sierra that i could find on network in 2 weak but useless. got random half-second freezes all time. 1 Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 20, 2018 Share Posted March 20, 2018 6 hours ago, MaLd0n said: i think is a bios config or smbios, i use iMacPro and beta 10.13.4 u need a tests MalD0n, Do you only have integrated graphics installed or do you also have a nVidia discrete in your system? In the acX Video Converter Pro.app I see behind graphics: nVidia GTX1080Ti and I do see hardware encoding supported: yes. Does this mean that video encoding is done with the nVidia card or does it mean the intel is doing the job? (In older version you could explicit turn off encoding platforms to enforce another platform to be used if I'm correct). Cheers 1 Link to comment Share on other sites More sharing options...
Louievicl Posted March 20, 2018 Share Posted March 20, 2018 Here's mine generated on my desktopmy System isMobo: ASUS PRIME Z270-ACPU: Intel i7 7700 @3.60GHzGPU: Gigabyte Nvidia GTX 1070 86Bhttps://drive.google.com/file/d/16Qb059T2SPQNrgwxezvZVxpT2sBSNGGS/view 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 20, 2018 Author Share Posted March 20, 2018 9 hours ago, iSoul01 said: Hey there! Could you pls take a look on my results, is there something else to do to improve? H/W: Asrock H110M-HDS, G4560, GTX650, 8GB, SSD Sata, TV connected by HDMI (with sound) Running 10.12.6, seems good I have tried all guides High Sierra that i could find on network in 2 weak but useless. got random half-second freezes all time. CLOVER.zip 3 hours ago, Pluskat5000Schiffe said: MalD0n, Do you only have integrated graphics installed or do you also have a nVidia discrete in your system? In the acX Video Converter Pro.app I see behind graphics: nVidia GTX1080Ti and I do see hardware encoding supported: yes. Does this mean that video encoding is done with the nVidia card or does it mean the intel is doing the job? (In older version you could explicit turn off encoding platforms to enforce another platform to be used if I'm correct). Cheers RX 580 now, nvidia provide a bad driver, i changed Link to comment Share on other sites More sharing options...
bogdanw Posted March 20, 2018 Share Posted March 20, 2018 (edited) Hy @MaLd0n, can you please help me with DSDT? I have attached my Send me zip The GA-Z170X-UD3 motherboard has the latest firmware, F23g released on 2018/03/09 with the new Intel patches. Edited March 20, 2018 by bogdanw 1 Link to comment Share on other sites More sharing options...
Pluskat5000Schiffe Posted March 20, 2018 Share Posted March 20, 2018 2 hours ago, MaLd0n said: CLOVER.zip RX 580 now, nvidia provide a bad driver, i changed Which model exactly? Will this do? to replace my 1080ti? Link to comment Share on other sites More sharing options...
Recommended Posts