MaLd0n Posted February 19, 2018 Author Share Posted February 19, 2018 L/E drwxr-xr-x 3 root wheel 102 8 ago 2017 AHCI_Intel_Generic_SATA.kext drwxr-xr-x@ 3 root wheel 102 6 jun 2015 AppleIntelE1000e.kext drwxr-xr-x@ 3 root wheel 102 12 ago 2015 AtherosE2200Ethernet.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_ACPISensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_CPUSensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_GPUSensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_LPCSensors.kext drwxr-xr-x 3 root wheel 102 20 jul 2017 IntelMausiEthernet.kext drwxr-xr-x@ 3 root wheel 102 11 nov 22:01 Lilu.kext drwxr-xr-x@ 3 root wheel 102 22 oct 13:45 NvidiaGraphicsFixup.kext drwxr-xr-x@ 3 root wheel 102 30 jul 2015 RealtekRTL8111.kext drwxr-xr-x 3 root wheel 102 14 dic 17:40 USBInjectAll.kext drwxr-xr-x 3 root wheel 102 23 feb 2017 XHCI-200-series-injector.kext drwxr-xr-x 3 root wheel 102 18 abr 2017 realtekALC.kext S/L/E drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 ACPISensors.kext drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 CPUSensors.kext drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 FakeSMC.kext.bak drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 GPUSensors.kext Use kext in one folder only, or Clover/Kexts/Other or Library/Extensions or System/Library/Extensions and use only necessary kexts, u have a collection 1 Link to comment Share on other sites More sharing options...
Onay Posted February 19, 2018 Share Posted February 19, 2018 CLOVER.zip CLOVER.zip send me new ioreg from Notebook, need apply more xD Thank you very much for your help. I started using the clover folder you sent me and everything works ok. I have a question, how do I configure my USB ports correctly. I ask because in USBnject all kext webpage, the author says that the kext by itself (without proper configuration) is just a temporary "fix", and he advises to "properly configure" all the ports in order to continue using the kext without problems. How do I "properly" configure my USB ports for using "the correct way" with USBInject all kext? Again, thanks for all your help. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Author Share Posted February 19, 2018 U need test all ports with one USB Stick e.g Don't need SSDTs, for USB use flag uia_exclude=XXXX EXAMPLE Unused Ports, uxcluded with flag uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS10;HS11;SSP1;SSP2;SSP6 Used Ports HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5 put usb stick in port, open ioreg and check what port appears... 1 Link to comment Share on other sites More sharing options...
Check-IN Posted February 19, 2018 Share Posted February 19, 2018 let's go replace folder, reboot and send me new ioreg CLOVER.zip ok, I'm on the notebook ... using your Clover folder I have a kernel panic. I had to make a video to understand what is the cause, I am attaching this frame, you are able to understand what it depends on? 1 Link to comment Share on other sites More sharing options...
themorb Posted February 19, 2018 Share Posted February 19, 2018 Hi Mald0n Here my zip file! I don`t know if Audio is still right configured. I'm just using a extern interface!! After a sleep: "USB device disabled. unplug the device using too much power to re-enable usb devices" on the console: kernel[0]: 035766.910192 AppleUSBXHCIPCI@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9 kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded *** Thx in advance for your support. Send me Morbillos-iMac.home.zip 1 Link to comment Share on other sites More sharing options...
SaSAX Posted February 19, 2018 Share Posted February 19, 2018 L/E drwxr-xr-x 3 root wheel 102 8 ago 2017 AHCI_Intel_Generic_SATA.kext drwxr-xr-x@ 3 root wheel 102 6 jun 2015 AppleIntelE1000e.kext drwxr-xr-x@ 3 root wheel 102 12 ago 2015 AtherosE2200Ethernet.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_ACPISensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_CPUSensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_GPUSensors.kext drwxr-xr-x 3 root wheel 102 17 oct 16:52 FakeSMC_LPCSensors.kext drwxr-xr-x 3 root wheel 102 20 jul 2017 IntelMausiEthernet.kext drwxr-xr-x@ 3 root wheel 102 11 nov 22:01 Lilu.kext drwxr-xr-x@ 3 root wheel 102 22 oct 13:45 NvidiaGraphicsFixup.kext drwxr-xr-x@ 3 root wheel 102 30 jul 2015 RealtekRTL8111.kext drwxr-xr-x 3 root wheel 102 14 dic 17:40 USBInjectAll.kext drwxr-xr-x 3 root wheel 102 23 feb 2017 XHCI-200-series-injector.kext drwxr-xr-x 3 root wheel 102 18 abr 2017 realtekALC.kext S/L/E drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 ACPISensors.kext drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 CPUSensors.kext drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 FakeSMC.kext.bak drwxr-xr-x@ 3 root wheel 102 7 oct 19:11 GPUSensors.kext Use kext in one folder only, or Clover/Kexts/Other or Library/Extensions or System/Library/Extensions and use only necessary kexts, u have a collection Thank'u so much, my sytem is now at 100%. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Author Share Posted February 19, 2018 ok, I'm on the notebook ... using your Clover folder I have a kernel panic. I had to make a video to understand what is the cause, I am attaching this frame, you are able to understand what it depends on? remove DSDT and check if work if work we edit again Hi Mald0n Here my zip file! I don`t know if Audio is still right configured. I'm just using a extern interface!! After a sleep: "USB device disabled. unplug the device using too much power to re-enable usb devices" on the console: kernel[0]: 035766.910192 AppleUSBXHCIPCI@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9 kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded *** Thx in advance for your support. CLOVER.zip Thank'u so much, my sytem is now at 100%. welcome 1 Link to comment Share on other sites More sharing options...
Check-IN Posted February 19, 2018 Share Posted February 19, 2018 remove DSDT and check if work if work we edit again CLOVER.zip welcome no... does not start in any way, I also tried to remove extensions and clover flags. Using the old folder Clover (which I enclose) once started from the stick, the second attempt to boot in kernel panic as you can see from the picture that I attach. can it be something related to the msr patch? CLOVER.zip 1 Link to comment Share on other sites More sharing options...
themorb Posted February 19, 2018 Share Posted February 19, 2018 Thx. I replace clover dir with yours. But Just a question is this for El capitan?????? on ioregistry explorer there are any red port but after a wake up the console begin to report 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Author Share Posted February 19, 2018 no... does not start in any way, I also tried to remove extensions and clover flags. Using the old folder Clover (which I enclose) once started from the stick, the second attempt to boot in kernel panic as you can see from the picture that I attach. can it be something related to the msr patch? try it change H_EC to EC 485f4543 45435f5f Thx. I replace clover dir with yours. But Just a question is this for El capitan?????? on ioregistry explorer there are any red port but after a wake up the console begin to report u have thunderbolt? 2 Link to comment Share on other sites More sharing options...
themorb Posted February 19, 2018 Share Posted February 19, 2018 u have thunderbolt? MaLd0n 2018-02-19 às 18.22.42.jpg On board there is a port but nothing is plugged on!!! USB port used 2x 2.0 : Hub with mouse and keyboard Audio interface I've also noticed a rise in temperature after 1st awake. I think this is related tho the usb power issue Sorry, but again : i'm running on el capitan (just cause the topic) are the settings right? big respect for the great contribute you made to the osx community thx 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 On board there is a port but nothing is plugged on!!! USB port used 2x 2.0 : Hub with mouse and keyboard Audio interface I've also noticed a rise in temperature after 1st awake. I think this is related tho the usb power issue Sorry, but again : i'm running on el capitan (just cause the topic) are the settings right? big respect for the great contribute you made to the osx community thx no problem in log is XHC2, XHC2 is a usb c inside RP05/PXSX try create a SSDT for power management and check if solve ssdtPRGen.command.zip 1 Link to comment Share on other sites More sharing options...
brt06 Posted February 20, 2018 Share Posted February 20, 2018 Many thanks for your reply MaLdOn. I replaced my clover with the one you sent me. Everything seems to work fine, however the shutdown problem is not fixed, it still reboots on its own after few secondes... 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 Many thanks for your reply MaLdOn. I replaced my clover with the one you sent me. Everything seems to work fine, however the shutdown problem is not fixed, it still reboots on its own after few secondes... Check and see if there's an ErP option in UEFI/BiOS that's disabled And enable that. It's usually under CPU Power Management or APM or something like that. I see that has fixed some Skylake systems with the same issue. The other one to check is if you have a "Wake on LAN" option enabled as that's another known cause. Link to comment Share on other sites More sharing options...
themorb Posted February 20, 2018 Share Posted February 20, 2018 no problem in log is XHC2, XHC2 is a usb c inside RP05/PXSX try create a SSDT for power management and check if solve ssdtPRGen.command.zip Hi mald0n I copy the file ssdt.dsl (renamed in ssdt.aml) to efi/clover/acpi/patched no change. usb error, console logging and cpu still high 1 Link to comment Share on other sites More sharing options...
brt06 Posted February 20, 2018 Share Posted February 20, 2018 Check and see if there's an ErP option in UEFI/BiOS that's disabled And enable that. It's usually under CPU Power Management or APM or something like that. I see that has fixed some Skylake systems with the same issue. The other one to check is if you have a "Wake on LAN" option enabled as that's another known cause. I tried this before, but I just gave it a second go ; either S4+S5, either S5 but it doesn't make any difference. As for the wake on lan, it is disabled. I thought it could come from USB devices (I have only 1 webcam and 1 Logitech unifying receiver for keyboard + mouse connected), so I tried to start/shotdown without them, but no difference neither... Really frustrating issue! 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 I tried this before, but I just gave it a second go ; either S4+S5, either S5 but it doesn't make any difference. As for the wake on lan, it is disabled. I thought it could come from USB devices (I have only 1 webcam and 1 Logitech unifying receiver for keyboard + mouse connected), so I tried to start/shotdown without them, but no difference neither... Really frustrating issue! try with only mouse and keyboard connect Link to comment Share on other sites More sharing options...
brt06 Posted February 20, 2018 Share Posted February 20, 2018 try with only mouse and keyboard connect Did this also, one at a time or both, nothing changed. The last thing I can think of would be my memory, as it is the only "exotic" part I have. I am expat in a "non-standard" place, where computer parts are not available like everywhere else and shipping from Europe or US is not an option, and the only Corsair PC3200 available as the time I did my build was RGB. Could it be the reason? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 Did this also, one at a time or both, nothing changed. The last thing I can think of would be my memory, as it is the only "exotic" part I have. I am expat in a "non-standard" place, where computer parts are not available like everywhere else and shipping from Europe or US is not an option, and the only Corsair PC3200 available as the time I did my build was RGB. Could it be the reason? i think no, the problçem appears in many hacks in all foruns run it again and send me files, i'll check log, etc RunMe.app.zip Link to comment Share on other sites More sharing options...
brt06 Posted February 20, 2018 Share Posted February 20, 2018 I hope I am not taking too much of your time MaLdOn. See attached. Thanks again Send me iMac-de-brt06.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 I hope I am not taking too much of your time MaLdOn. See attached. Thanks again Try Arquivo Comprimido.zip Link to comment Share on other sites More sharing options...
brt06 Posted February 20, 2018 Share Posted February 20, 2018 No MaLdOn, no success, same thing. It's running fine, but it does not fix the shutdown issue 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 hello MaLd0n or installed High Sierra on these components: Cpu i7 6600K Asus Maximus viii Hero 8+8 DDR4 2400Mhz Gigabayte RX560 2Gb. can you check whether or not the efi is created well and more? thank you. CLOVER.zip No MaLdOn, no success, same thing. It's running fine, but it does not fix the shutdown issue bad Link to comment Share on other sites More sharing options...
zzmadd Posted February 20, 2018 Share Posted February 20, 2018 Hi Guys, Any advice for a budget boards that works well both for Coffee Lake & Kaby Lake? Any CPu where integrated graphics work well with minimal hassle? Thanks in advance. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Author Share Posted February 20, 2018 Hi Guys, Any advice for a budget boards that works well both for Coffee Lake & Kaby Lake? Any CPu where integrated graphics work well with minimal hassle? Thanks in advance. serie 100 or 200 for Kabylake serie 300 for coffeelake i think for coffeelake only serie 300 work Intel 620 and 630 work good 1 Link to comment Share on other sites More sharing options...
Recommended Posts