Jump to content

[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT

MaLd0n

By MaLd0n,
in Installation Guides

 Share
5,455 posts in this topic

Recommended Posts

RandomTech
RandomTech
Posted
Posted

is not send me, is a Ioreg, extract with ioreg explorer

attachicon.gifIORegistryExplorer.app.zip

open .app, File, Save as

thats what I'm doing then I'm running RunMe app, sorry.. but here it is again without RunMe app.

is not send me, is a Ioreg, extract with ioreg explorer

attachicon.gifIORegistryExplorer.app.zip

open .app, File, Save as

I can see from the size it could be wrong again, now I extracted again and its 6mb compressed..

Apple’s iMac.zip

Apple’s iMac.zip

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted

thats what I'm doing then I'm running RunMe app, sorry.. but here it is again without RunMe app.

i create device GFX0 for AMD and patches in config.plist rename both devices, IntelHD(GFX0) and AMD(create GFX0) 

try with GFX1, if dont solve i remove it, is just cosmetic, all essentials and good patches is already ;)

DSDT.GFX1.zip

  • Like 1
Link to comment
Share on other sites
RandomTech
RandomTech
Posted
Posted

i create device GFX0 for AMD and patches in config.plist rename both devices, IntelHD(GFX0) and AMD(create GFX0) 

try with GFX1, if dont solve i remove it, is just cosmetic, all essentials and good patches is already ;)

attachicon.gifDSDT.GFX1.zip

Sorry, now you got me in my noob point  :) , do I need to modify those patches in config.plist, or DSDT? and how to do ''IntelHD(GFX0) and AMD(create GFX0)''?

  • Like 1
Link to comment
Share on other sites
kencar
kencar
Posted
Posted

try with injector BT, is brodacom correct?

attachicon.gifBluetoothDevBroadcomInjector.kext.zip

u can use hardware acceleration with intel HD + shiki kext + shigva flag, but if u need sleep...have a problem.

beer is here http://go.redirectingat.com/?id=292X457&xs=1&isjs=1&url=https%3A%2F%2Fwww.paypal.com%2Fcgi-bin%2Fwebscr%3Fcmd%3D_s-xclick%26hosted_button_id%3DRYQ6CGUGK5D6S&xguid=6a8236aac9bfdfda0e898dfe98eb5126&xuuid=35a482a9b0824ffdb58071e4aebeeaca&xsessid=e8b332c26fd158afc2a64a2490da08aa&xcreo=0&xed=0&sref=http%3A%2F%2Fwww.insanelymac.com%2Fforum%2Ftopic%2F332021-msi-gv62-7re-1013-installation%2F&pref=http%3A%2F%2Fwww.insanelymac.com%2Fforum%2Findex.php%3Fapp%3Dcore%26module%3Dsearch%26do%3DviewNewContent%26search_app%3Dforums&xtz=120

 

let me know if work

i need a time for check all patches for x299, i don't have any for test and create all patches, i'll check it

Try

attachicon.gifDSDT.aml.zip

 

Put DSDT in Clover/Acpi/patched, reboot, if u have problems press O key in Clover boot screen, go to Acpi Patching/DSDT Name and put DSDT02.aml and DSDT.aml dont load 

just boot failure . And your method works to avoid loading dsdt.

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted

 

Hola, tengo problemas para poder actualizar el sistema operativo y el modo de suspensión.
 
Características de mi computadora:
 
- Gigabyte ga b250m-ds3h
- 8 GB Ram
- GTX 1050 2G
- I5 7400 3GH
- SSD 250
 
Entonces mi carpeta EFI.
 
Gracias 

 

CLOVER.zip

Hi,

 

I need some fine tune :)

 

My setup:

Asrock H170M-Pro 4, i5-6500, GTX 1060, 2*8GB RAM, SSD 120GB

 

Thanks!

-Post your full Clover folder
-Send me tables
-Send me one Ioreg too
  • Like 3
Link to comment
Share on other sites
Check-IN
Check-IN
Posted
Posted

 

 

Hello Maldon, I finally found the time to format and start from scratch. With the new version of Clover, PCI cards are natively recognized.

Everything seems to go, the only problem is that the PC will restart when I turn it off.

I think the defect is related to the USB 2 controller, because if you disable it from the bios, the PC turns off without problems. With the controller turned off certain USB ports do not work but System Profiler still sees the devices connected to these ports (but can not use them).

This is the UHCI controller, IOREG sees 6 UHCI ports of which the former has the same address as 4, as well as the second of 5, and the third of 6. I think the solution to the problem may be here, but I do not know exactly what I have to change.

I am attaching all the files as you post to this link, I have also included some extra content, such as the list of LPCI controllers amd the PMSET output.

if you need anything else, just write me. Consider that I do not use DSDT now and everything seems to work. I remind you that I have an Intel S5520HC server board that mounts two Xeon e5620, 24GB ram 1333 ECC and various HD, two USB3 PCI cards, a firewire card, an ATI 5xxx. My pc has a very different architecture than those found on the forum.

Please, do not consider the dsdt of my previous posts, let's start from scratch

Let me know

Thank you

 

http://www.terminalstrip.net/MaLdOn/HACKPRO_MALDON.zip

 

http://www.terminalstrip.net/MaLdOn/HACKPRO_MALDON.zip

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted

Hello Maldon, I finally found the time to format and start from scratch. With the new version of Clover, PCI cards are natively recognized.

Everything seems to go, the only problem is that the PC will restart when I turn it off.

I think the defect is related to the USB 2 controller, because if you disable it from the bios, the PC turns off without problems. With the controller turned off certain USB ports do not work but System Profiler still sees the devices connected to these ports (but can not use them).

This is the UHCI controller, IOREG sees 6 UHCI ports of which the former has the same address as 4, as well as the second of 5, and the third of 6. I think the solution to the problem may be here, but I do not know exactly what I have to change.

I am attaching all the files as you post to this link, I have also included some extra content, such as the list of LPCI controllers amd the PMSET output.

if you need anything else, just write me. Consider that I do not use DSDT now and everything seems to work. I remind you that I have an Intel S5520HC server board that mounts two Xeon e5620, 24GB ram 1333 ECC and various HD, two USB3 PCI cards, a firewire card, an ATI 5xxx. My pc has a very different architecture than those found on the forum.

Please, do not consider the dsdt of my previous posts, let's start from scratch

Let me know

Thank you

 

http://www.terminalstrip.net/MaLdOn/HACKPRO_MALDON.zip

 

http://www.terminalstrip.net/MaLdOn/HACKPRO_MALDON.zip

only essentials

try

DSDT.aml.zip

  • Like 2
Link to comment
Share on other sites
Check-IN
Check-IN
Posted
Posted

only essentials

try

attachicon.gifDSDT.aml.zip

Hey YOU ARE THE BIG GOD! now I have my shutdown working!

thanx sooooo much!

what did you do?

 

now I ask you two things:

1. i have power management may be incomplete or unsupported, how to solve ??

 

2. how to rename the PCi in System Profiler?

  • Like 1
Link to comment
Share on other sites
szuszinho
szuszinho
Posted
Posted

https://www.dropbox.com/sh/5o5b79fcsc19lte/AABJ7YdscbtJS9ThPwWGkvfka?dl=0

 

Thanks!

 

(I updated my vga RX 460-»GTX 1060)

  • Like 1
Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted

Hey YOU ARE THE BIG GOD! now I have my shutdown working!

thanx sooooo much!

what did you do?

 

now I ask you two things:

1. i have power management may be incomplete or unsupported, how to solve ??

 

2. how to rename the PCi in System Profiler?

PCI, replace, reboot, send me new ioreg and one screenshot PCI

DSDT.aml.zip

 

send me one full debug, mount efi and run gen_debug.command

OSX-Debug.zip

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...