[RYZEN] macOS 10.12.x (Sierra) Kernel Research&Development Thread

Ciro82 · May 29, 2017

Thanks and can you or Bronya share patched CLOVERX64.efi and BOOTX64.efi for my testing for Ryzen 1700X hackintosh ?

They won't, it's like a Top Secret thing, you know

I've already asked to them...

gills83 · May 29, 2017

So is this how this place is run? I was nice enough to donate $45 to ask one question. I'm sure it was a noob question, I hate macs, but I need 3 machines to run for a testing out a java program. I have no free time to spend hours trying to figure it out. I have a transmac, I brought a mac pro laptop if I need it. So again, I can make the usb installer from either transmac or the mac book, but I get b1f: init then it restarts. I don't care if the audio works, or any of the apple specific {censored}, the video card doesn't even have to work right. I don't have much free time and the little I do I don't feel like spending messing around with this, I can follow instructions fine so if someone gets me up and running they can shoot me a paypal link after and I'll shoot them a $100 bucks, although it would be nice for one of the people that benefited from my donation to be able to answer me, just out of principal, I thought enough to make a donation before asking a single thing, and $20 more than they asked for, it would be nice to get the same consideration.

An iMac costs $ 2,000, I gladly donated $ 100 to Bronya and I have sent a FX 4300 port to my charge always with pleasure to Shaneee, who can give, give and if I have to give again, I will give again .

jsl · May 29, 2017

It's been a long time since I built a hackintosh but I have suddenly developed a need to have one. I have read this whole forum 3 times at least, I saw other people were getting an error towards the beginning of the post and seemed to have passed that problem. I have created a USB installer using transmac, everytime I try and boot from it I get to b1f: init and then a reboot.

cpu: r7 1700

mobo: asus prime x370

gpu: 1050 ti

memory:corsair dominator

hdd: 500gb ssd

Thanks for the help, I'll throw money at whoever helps past this lol

My free and honest advice to quickly solve your installation of 10.12.x in Ryzen hackintosh:

1. Install 10.12.x in your MacBook or any working MAC OS X partition at first

2. Carbon Copy Clone this partition to external USB HDD or Flash (about 16~32 GB in size is enough)

3. Add Bronya's Boot and Kernel to external USB HDD or Flash (operating at MacBook or any working Mac OS X partition)

4. Clone this external USB's 10.12.x partition to your Ryzen's SSD via Windows 10

5. If everything is fine, it can boot to 10.12.x now.

Another solution is clone your USB installer to your SSD, then install by SSD after Bronya's boot & kernel were copied to correct place (boot in / and kernel in /System/Library/Kernels/)

According to my past experience I have done this way successfully for more than 30 times via eSATA HDD or SSD.

Ciro82 · May 29, 2017

An iMac costs $ 2,000, I gladly donated $ 100 to Bronya and I have sent a FX 4300 port to my charge always with pleasure to Shaneee, who can give, give and if I have to give again, I will give again .

C'mon Gils, that's not the point, what you're saying is like "You have to donate if you want Clover and OSX on Ryzen"...

A Forum is meant for sharing contents and knowledge, not to PROMOTE DONATIONS.

gills83 · May 29, 2017

C'mon Gils, that's not the point, what you're saying is like "You have to donate if you want Clover and OSX on Ryzen"...

A Forum is meant for sharing contents and knowledge, not to PROMOTE DONATIONS.

But not, it is not in this direction, we must put ourselves in the place of certain coders who do not have the means to work in good conditions with hardware to the page, it is on the contrary to advance the Coding and development, Intel is simple hardware Apple, AMD is really very complex and it takes AMD hardware to move forward, otherwise, we go in circles and nothing moves

Ciro82 · May 29, 2017

But not, it is not in this direction, we must put ourselves in the place of certain coders who do not have the means to work in good conditions with hardware to the page, it is on the contrary to advance the Coding and development, Intel is simple hardware Apple, AMD is really very complex and it takes AMD hardware to move forward, otherwise, we go in circles and nothing moves

That's what the term "sharing" is meant for, you need feedback on your work but you don't have a proper hardware to test it? Simple! Share your work and get feedback from users that owns the proper hardware...

I'm not here to steal Bronya's clover for Ryzen... (That's what it looks like)

gills83 · May 29, 2017

That's what the term "sharing" is meant for, you need feedback on your work but you don't have a proper hardware to test it? Simple! Share your work and get feedback from users that owns the proper hardware...

I'm not here to steal Bronya's clover for Ryzen... (That's what it looks like)

It does not work that way, if you have a previous system in Sierra, it will be difficult to code on a system that is not up to date, with Sierra in locking

jsl · May 29, 2017

Thank you jsl!!! That's easy to follow. Just one question, you have me putting the boot in "/" and the kernal in "/System/Library/Kernels" for all methods? And after step 3, would transmac be the way to go to restore the usb to the sdd? Thank you, well if I get it working I will be quite happy, I will insist on sending you the $100 I said I would or donate it to the site or bronya, your choice.

1. putting the boot in "/" and the kernal in "/System/Library/Kernels" for both installer USB/SSD or booting partition of SSD in your Ryzen hackintosh

2. just use any tools which can clone HFS+ partition (e.g. Paragon's HFS tool in Windows)

I'm sorry because I have no good experience to use transmac.

Paragon product is what I recommend here.

https://www.paragon-software.com/home/hfs-windows/download.html

Have a look at Clonezilla and Kleo Bare Metal Backups. Maybe one of those would do the job for you (Clone HFS+ partitions).

http://clonezilla.org/clonezilla-live.php

http://www.kleobackup.net/downloads-kleo.html

Bronya · May 29, 2017

please wait ...

I'm making repair my computer (((

Shaneee · May 29, 2017

Guys lets not get into another argument here please...

bdk1104 · May 29, 2017

I follow step by step to make installation usb mac os 12.10.5 from Gigamaxx, this topic : http://www.insanelymac.com/forum/topic/323547-ryzenpatcher-thread-for-channeling-info-about-updates/?hl=%2Brisen+%2Bpatcher#entry2425256

use : boot and kernel from Ryzen Ryzen Essentials

After boot with flag: -v, my computer stuck at " system uptime in nanosecond : ..... "

What's wrong, pls help me, my computer spec: Ryzen R5 1600, Asus B350 Prime Plus, R7-370. what i need to do? Thank so much and sory for my bad english

PTchoi · May 29, 2017

I try to root for Bronya.

gengik84 · May 29, 2017

Donation is a personal choice!

Enough donation promotions, you don't have the right to do that, forced donations are not allowed.

Now, let's stop..... :offtopic:

Thanks.

gills83 · May 29, 2017

repost

closed for me

Bronya · May 29, 2017

...

I said that i repair computer ....

This need time !!!

Crash hdd and video card ... not good ...

carlo_67 · May 29, 2017

Ot:

This is not a market, you want to donate, donate too, to the Forum or to anyone you want,

but here you respect the topic, I do not want to see more written offers,

It's not a warning but a certainty

bdk1104 · May 30, 2017

VoodooTSCSyncAMD.kext for 8 cores, I hope it will help

For other CPUs, the info.plist file should be changed, check the threads of your CPU and edit the correct value into "IOCPUNumber"

(reading here: http://www.insanelymac.com/forum/topic/253773-amd-dual-core-optimizer-for-snow-leopard/ )

<key>VoodooTSCSyncAMD</key>

<dict>

<key>CFBundleIdentifier</key>

<string>org.voodoo.driver.VoodooTSCSyncAMD</string>

<key>IOClass</key>

<string>org_voodoo_driver_VoodooTSCSyncAMD</string>

<key>IOMatchCategory</key>

<string>VoodooTSCSyncAMD</string>

<key>IOPropertyMatch</key>

<dict>

<key>IOCPUNumber</key>

<integer>15</integer> ⟸

</dict>

<key>IOProviderClass</key>

<string>AppleACPICPU</string>

</dict>

Thank so much, but how about AMD R5 1600 with 6 core, what is exactly value for it.

Gigamaxx · May 30, 2017

Thank so much, but how about AMD R5 1600 with 6 core, what is exactly value for it.

I used my r7 1700 Sierra configuration with r5 1500x and had no problems. Switched CPUs and it worked with either one. This is with the AMDTSync8 core kext, you can choose a 6 core option using Pandora/Xerxe.

bdk1104 · May 30, 2017

I used my r7 1700 Sierra configuration with r5 1500x and had no problems. Switched CPUs and it worked with either one. This is with the AMDTSync8 core kext, you can choose a 6 core option using Pandora/Xerxe.

oh, thank you so much

Bronya · May 30, 2017

Hi to all !

My hardware recovered ...

I compiled clover - only beta version . Me no like tis Clover , really long programming , and need fix , but this long time ! Very no like me !

And again no have time ... sorry ...

CloverISO-4078.zip

CloverCD.zip

jsl · May 30, 2017

Hi to all !

My hardware recovered ...

I compiled clover - only beta version . Me no like tis Clover , really long programming , and need fix , but this long time ! Very no like me !

And again no have time ... sorry ...

Thanks for this new Clover EFI boot which can show its Boot Menu.

But I always got black screen and instant reboot after showing something seems fine if select to boot with "-v".

If select to safe boot always got stop at errors loading kernel cache.

Hope you can fix it as soon as possible.

The above applied to 10.10.5, 10.11.6, & 10.12.4/10.12.5 for Ryzen 1700X hackintosh.

gills83 · May 30, 2017

Hi to all !

My hardware recovered ...

I compiled clover - only beta version . Me no like tis Clover , really long programming , and need fix , but this long time ! Very no like me !

And again no have time ... sorry ...

hello Bronya good job !!! :thumbsup_anim:

no works for me

-1 deleted driver64-off

-2 deleted driver64uefi

-3 deleted config.plist

important : Rebuild the kernelcache with every error you get in clover

0:100  0:100  MemLog inited, TSC freq: 2994828300
0:100  0:000  CPU was calibrated without ACPI PM Timer: Intel ICH device was not found., use RTC
0:100  0:000  
0:100  0:000  Now is 30.5.2017,  10:39:50 (GMT)
0:100  0:000  Starting Clover revision: 4078 on American Megatrends EFI
0:100  0:000  Build with: [Args: cleanlib | -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 3 cleanlib | OS: 10.9.5 | XCODE: 6.2]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48) @D8AD1B98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1
0:100  0:000  SmbiosTable.Type17->Vendor = Unknown
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMK8GX4M1A2400C14   
0:100  0:000  Type 17 Index = 1
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 DIMM_A2
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 2
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/3, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 3
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/4, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 DIMM_B2
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'System Product Name' with board 'PRIME B350M-A'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 68747541 Model=800F11
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  	Looking to disable C1E if is already enabled by the BIOS:
0:100  0:000  BrandString = AMD Ryzen 7 1700 Eight-Core Processor          
0:100  0:000  gCPUStructure.TSCFrequency: 3000
0:100  0:000  MaxRatio: f 
0:100  0:000  busFrequency: 0 MHz 
, cpuMult: 60 
, cpuFrequency: 3000 
0:100  0:000  MaxDiv/MinDiv: 30.0/7
0:100  0:000  Turbo: 0/0/0/0
0:100  0:000  Features: 0x178BFBFF
0:100  0:000  Threads: 16
0:100  0:000  Cores: 16
0:100  0:000  FSB: 25 MHz
0:100  0:000  CPU: 0 MHz
0:100  0:000  TSC: 3000 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 1022 1450 class=060000
0:100  0:000  PCI (00|00:01.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:01.03) : 1022 1453 class=060400
0:100  0:000  PCI (00|03:00.00) : 1022 43BB class=0C0330
0:100  0:000  PCI (00|03:00.01) : 1022 43B7 class=010601
0:100  0:000  PCI (00|03:00.02) : 1022 43B2 class=060400
0:100  0:000  PCI (00|1D:00.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|22:00.00) : 1B21 1343 class=0C0330
0:100  0:000  PCI (00|1D:04.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|1D:05.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|1D:06.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|25:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|1D:07.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|26:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 1 Vendor=Realtek
0:100  0:000  PCI (00|00:02.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:03.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:03.01) : 1022 1453 class=060400
0:100  0:000  PCI (00|27:00.00) : 1002 679A class=030000
0:100  0:000   - GFX: Model=AMD Radeon HD 7950/8950/R9 280 (ATI/AMD)
0:100  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000050
0:100  0:000  PCI (00|27:00.01) : 1002 AAA0 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:04.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:07.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:07.01) : 1022 1454 class=060400
0:100  0:000  PCI (00|28:00.00) : 1022 145A class=130000
0:100  0:000  PCI (00|28:00.02) : 1022 1456 class=108000
0:100  0:000  PCI (00|28:00.03) : 1022 145C class=0C0330
0:100  0:000  PCI (00|00:08.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:08.01) : 1022 1454 class=060400
0:100  0:000  PCI (00|29:00.00) : 1022 1455 class=130000
0:100  0:000  PCI (00|29:00.02) : 1022 7901 class=010601
0:100  0:000  PCI (00|29:00.03) : 1022 1457 class=040300
0:100  0:000  PCI (00|00:14.00) : 1022 790B class=0C0500
0:100  0:000  PCI (00|00:14.03) : 1022 790E class=060100
0:100  0:000  PCI (00|00:18.00) : 1022 1460 class=060000
0:100  0:000  PCI (00|00:18.01) : 1022 1461 class=060000
0:100  0:000  PCI (00|00:18.02) : 1022 1462 class=060000
0:100  0:000  PCI (00|00:18.03) : 1022 1463 class=060000
0:100  0:000  PCI (00|00:18.04) : 1022 1464 class=060000
0:100  0:000  PCI (00|00:18.05) : 1022 1465 class=060000
0:100  0:000  PCI (00|00:18.06) : 1022 1466 class=060000
0:100  0:000  PCI (00|00:18.07) : 1022 1467 class=060000
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:106  0:002  - [00]: metal
0:109  0:002  === [ Found config plists ] ===============================
0:109  0:000  - config.plist
0:110  0:001  === [ GetEarlyUserSettings ] ==============================
0:110  0:000  timeout set to 5
0:110  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:110  0:000  === [ LoadDrivers ] =======================================
0:113  0:002  Loading AppleImageCodec-64.efi  status=Success
0:118  0:004  Loading AppleKeyAggregator-64.efi  status=Success
0:120  0:002  Loading AppleUITheme-64.efi  status=Success
0:123  0:003  Loading CsmVideoDxe-64.efi  status=Success
0:125  0:002   - driver needs connecting
0:125  0:000  Loading DataHubDxe-64.efi  status=Success
0:129  0:003  Loading EmuVariableUefi-64.efi  status=Success
0:133  0:004  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:133  0:000  Loading Fat-64.efi  status=Success
0:135  0:002   - driver needs connecting
0:135  0:000  Loading FirmwareVolume-64.efi  status=Success
0:137  0:002  Loading FSInject-64.efi  status=Success
0:142  0:004  Loading OsxAptioFix2Drv-64.efi  status=Success
0:144  0:002  Loading OsxFatBinaryDrv-64.efi  status=Success
0:149  0:004  Loading PartitionDxe-64.efi  status=Success
0:151  0:002   - driver needs connecting
0:151  0:000  Loading SMCHelper-64.efi  status=Success
0:153  0:002  Loading VBoxHfs-64.efi  status=Success
0:155  0:002   - driver needs connecting
0:155  0:000  4 drivers needs connecting ...
0:155  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:155  0:000  Partition driver loaded: 
0:155  0:000  Video driver loaded: disconnect Success
0:183  0:028  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:431  0:247  CsmVideoDriverBindingStart
0:431  0:000  mixed support=40010
0:431  0:000  Controller is [030000]
0:431  0:000  Check for VBE
0:436  0:004   found Detail Timing 1920x1080
0:441  0:004    0 1280x960 attr=BB - ok, edid-
0:441  0:000    1 640x480 attr=BB - ok, edid+, 640x480, working, highest, pref=1
0:441  0:000    2 800x600 attr=BB - ok, edid+, 800x600, working, highest, pref=2
0:442  0:000    3 1024x768 attr=BB - ok, edid+, 1024x768, working, highest, pref=3
0:442  0:000    4 1280x1024 attr=BB - ok, edid+, working, highest, pref=4
0:444  0:001    5 1400x1050 attr=BB - ok, edid-
0:448  0:003    6 1920x1080 attr=BB - ok, edid+, working, highest, pref=6
0:448  0:000  CsmVideo: New mode: 6 1920x1080 - set
0:530  0:082   - SetMode pref 6 (6) = Success
0:530  0:000  CsmVideoCheckForVbe - Success
0:530  0:000  CsmVideoDriverBindingStart end Success
0:530  0:000  CsmVideo: New mode: 3 1024x768 - set
0:586  0:055  CsmVideo: New mode: 4 1280x1024 - set
0:825  0:239  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
0:978  0:153  === [ InitScreen ] ========================================
0:978  0:000  Console modes reported: 4, available modes:
0:978  0:000   - [01]: 80x25 (current mode)
0:978  0:000   - [02]: 80x50
0:978  0:000   - [03]: 100x31
0:978  0:000   - [04]: 240x56
0:978  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48)
0:978  0:000  Using embedded font: Success
0:979  0:000  === [ GetMacAddress ] =====================================
0:979  0:000  === [ ScanSPD ] ===========================================
0:979  0:000  === [ GetAcpiTablesList ] =================================
0:979  0:000  Get Acpi Tables List from RSDT:
0:979  0:000   - [00]: FACP  A M I  len=132
0:979  0:000   - [01]: APIC  A M I  len=222
0:979  0:000   - [02]: FPDT  A M I  len=68
0:979  0:000   - [03]: SSDT  CPMCMN len=5732
0:979  0:000   - [04]: SSDT   len=35916
0:979  0:000   - [05]: FIDT  A M I len=156
0:979  0:000   - [06]: SSDT  AmdTable len=8420
0:979  0:000   - [07]: SRAT  AmdTable len=304
0:979  0:000   - [08]: CRAT  AmdTable len=3920
0:979  0:000   - [09]: CDIT  AmdTable len=41
0:979  0:000   - [10]: SSDT  AOD len=6113
0:979  0:000   - [11]: MCFG  A M I len=60
0:979  0:000   - [12]: HPET  A M I len=56
0:979  0:000   - [13]: SSDT  FCHZP len=36
0:979  0:000   - [14]: UEFI   len=66
0:979  0:000   - [15]: BGRT  A M I  len=56
0:979  0:000   - [16]: IVRS   len=48
0:979  0:000   - [17]: SSDT   len=248
0:979  0:000  Calibrated TSC frequency =2994828300 =2994MHz
0:980  0:000  === [ GetUserSettings ] ===================================
0:980  0:000  USB FixOwnership: yes
0:980  0:000   - final DSDT Fix mask=00000000
0:980  0:000  ChassisType: 0x6
0:980  0:000  === [ ScanVolumes ] =======================================
0:980  0:000  Found 14 volumes with blockIO
0:980  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)
0:981  0:001          USB volume
0:981  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48)
0:982  0:001          Result of bootcode detection: bootable unknown (legacy)
0:982  0:000          USB volume
0:982  0:000          This is SelfVolume !!
0:982  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(2,MBR,0x00000000,0x706F4B,0x33E90B5)
0:984  0:001          USB volume
0:984  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)
0:984  0:000          Result of bootcode detection: bootable unknown (legacy)
0:984  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)
0:985  0:000          Result of bootcode detection: bootable unknown (legacy)
0:985  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,5BD73122-E8B1-4B53-B8B6-1F4EA14260FD,0x28,0x64000)
0:985  0:000          Result of bootcode detection: bootable Clover (clover)
0:985  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,8046A2D7-7733-48D7-8A66-71E28C503EB0,0x64028,0x200000)
0:986  0:000          Result of bootcode detection: bootable unknown (legacy)
0:986  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,C885BB11-1DC8-427E-A2C0-FBE08BEC4B1F,0x2A4028,0x1AB729A0)
0:987  0:000          Result of bootcode detection: bootable unknown (legacy)
0:987  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
0:987  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,5250A8D7-1783-4CD6-A148-F06EAB9A3638,0x35ABF288,0x135F20)
0:988  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(6,GPT,D712D9E7-EA6C-4186-824D-48B695448763,0x35BF51A8,0x1B7245C0)
0:988  0:000          Result of bootcode detection: bootable unknown (legacy)
0:988  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(7,GPT,88AF86BB-6C54-4A59-B4E5-8D32D417A23D,0x51359768,0x2336D620)
0:989  0:000          Result of bootcode detection: bootable unknown (legacy)
0:989  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x17CF17CE,0x800,0xFA000)
1:007  0:017          Result of bootcode detection: bootable Windows (vista,win)
1:007  0:000  - [13]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,MBR,0x17CF17CE,0xFA800,0x25333800)
1:007  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:117  0:109  Loading nvram.plist from Vol 'EFI' - loaded, size=2438
1:130  0:013  === [ PutNvramPlistToRtVars ] =============================
1:130  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
1:130  0:000   Skipping EmuVariableUefiPresent
1:130  0:000   Adding Key: backlight-level: Size = 2, Data: FF FF 
1:130  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
1:130  0:000   Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 
1:130  0:000   Adding Key: efi-boot-device: Size = 216, Data: 3C 61 72 72 61 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 50 72 6F 76 69 64 65 72 43 6C 61 73 73 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 49 4F 4D 65 64 69 61 3C 2F 73 74 72 69 6E 67 3E 3C 6B 65 79 3E 49 4F 50 72 6F 70 65 72 74 79 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 55 55 49 44 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 34 31 46 38 35 39 31 35 2D 42 30 36 31 2D 34 37 31 31 2D 42 30 42 35 2D 33 30 31 34 30 44 45 34 38 46 31 44 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 61 72 72 61 79 3E 
1:130  0:000   Adding Key: efi-boot-device-data: Size = 80, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 03 01 01 01 06 00 01 00 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 04 00 00 00 E8 C8 F4 1A 00 00 00 00 A0 29 B7 1A 00 00 00 00 15 59 F8 41 61 B0 11 47 B0 B5 30 14 0D E4 8F 1D 02 02 7F FF 04 00 
1:130  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 12 
1:130  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
1:130  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
1:130  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-BBIN-ui8: Size = 1, Data: 01 
1:130  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 06 F0 F0 00 
1:130  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
1:130  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
1:130  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
1:130  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 39 30 00 00 00 00 00 
1:130  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 20 0F 00 00 18 
1:130  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
1:130  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 39 30 00 00 00 00 00 
1:130  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
1:130  0:000   Adding Key: fmm-computer-name: Size = 15, Data: 4D 61 63 20 50 72 6F 20 64 65 20 67 69 6C 73 
1:130  0:000   Adding Key: platform-uuid: Size = 16, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
1:130  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
1:130  0:000   Adding Key: specialbootdevice: Size = 80, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 03 01 01 01 06 00 01 00 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 04 00 00 00 E8 C8 F4 1A 00 00 00 00 A0 29 B7 1A 00 00 00 00 15 59 F8 41 61 B0 11 47 B0 B5 30 14 0D E4 8F 1D 02 02 7F FF 04 00 
1:130  0:000  === [ InitTheme ] =========================================
1:130  0:000  no default theme, get random theme metal
1:131  0:000  Using theme 'metal' (EFI\CLOVER\themes\metal)
1:135  0:004  Loading font from ThemeDir: Success
1:136  0:000  Choosing theme metal
1:136  0:000  after NVRAM boot-args=-v dart=0 npci=0x2000 rootless=0 keepsyms=1 kextlog=0xffff
1:136  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:136  0:000  found AppleSMC protocol
1:137  0:000  === [ ScanLoader ] ========================================
1:137  0:000  - [01]: 'CLOVER'
1:143  0:006  - [02]: 'OS X Base System'
1:149  0:005          AddLoaderEntry for Volume Name=OS X Base System
1:153  0:004      Check if volume Is Hibernated:
1:153  0:000      Check sleep image 'by signature':
1:162  0:008      using default sleep image name = \private\var\vm\sleepimage
1:169  0:007      sleepimage not found -> Not Found
1:169  0:000      hibernated: no - sign
1:180  0:010  - [05]: 'EFI'
1:199  0:018  - [06]: 'SANS TITRE'
1:202  0:003  - [07]: 'MacHDD'
1:236  0:033          AddLoaderEntry for Volume Name=MacHDD
1:257  0:020      Check if volume Is Hibernated:
1:257  0:000      Check sleep image 'by signature':
1:302  0:045      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:302  0:000      SleepImage name from pref: ImageVolume = 'MacHDD', ImageName = '\private\var\vm\sleepimage'
1:328  0:025      sleepimage not found -> Not Found
1:328  0:000      hibernated: no - sign
1:397  0:068  - [08]: 'Sierra'
1:428  0:031          AddLoaderEntry for Volume Name=Sierra
1:454  0:026      Check if volume Is Hibernated:
1:454  0:000      Check sleep image 'by signature':
1:503  0:048      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:503  0:000      using default sleep image name = \private\var\vm\sleepimage
1:543  0:040      sleepimage not found -> Not Found
1:543  0:000      hibernated: no - sign
1:613  0:069  - [09]: 'Recovery HD'
1:614  0:000          AddLoaderEntry for Volume Name=Recovery HD
1:631  0:017  - [10]: 'boli'
1:645  0:014          AddLoaderEntry for Volume Name=boli
1:664  0:018      Check if volume Is Hibernated:
1:664  0:000      Check sleep image 'by signature':
1:681  0:016      using default sleep image name = \private\var\vm\sleepimage
1:704  0:022      sleepimage not found -> Not Found
1:704  0:000      hibernated: no - sign
1:775  0:070  - [12]: 'Réservé au système'
1:778  0:003  - [13]: ''
1:782  0:003  Scanning legacy ...
1:782  0:000   5: 'EFI' (clover) add legacy
1:786  0:003   added 'Boot Clover from EFI' OSType=3 Icon=clover
1:786  0:000  12: 'Réservé au système' (vista,win) add legacy
1:786  0:000          [!] Icon 18 (icons\vol_internal_ntfs.icns) not found (path: EFI\CLOVER\themes\metal)
1:787  0:000   added 'Boot Windows from Réservé au système' OSType=2 Icon=vista,win
1:787  0:000  13: '' (vista,win) add legacy
1:787  0:000   added 'Boot Windows from ' OSType=2 Icon=vista,win
1:787  0:000  === [ AddCustomTool ] =====================================
1:790  0:003  found tool \EFI\CLOVER\tools\Shell64U.efi
1:790  0:000  Checking EFI partition Volume 5 for Clover
1:790  0:000   Found Clover
1:793  0:003  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:794  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
1:948  0:153  === [ GetEfiBootDeviceFromNvram ] =========================
1:948  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
1:948  0:000    - Volume: 'PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)'
1:948  0:000    - LoaderPath: '<null string>'
1:948  0:000    - Guid = 41F85915-B061-4711-B0B5-30140DE48F1D
1:948  0:000  === [ FindStartupDiskVolume ] =============================
1:948  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
1:948  0:000     - searching for that partition
1:948  0:000      - found entry 2. 'Boot macOS from Sierra', Volume 'Sierra'
1:948  0:000  Boot redirected to Entry 2. 'Boot macOS from Sierra'
1:948  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:948  0:000  DefaultIndex=2 and MainMenu.EntryCount=14
2:241  0:293  GUI ready
5:563  3:322  Boot option Boot0000 not found
5:563  0:000  === [ StartLoader ] =======================================
5:563  0:000  Finally: Bus=99827kHz CPU=2995MHz
5:563  0:000  Loading boot.efi  status=Success
5:672  0:108  GetOSVersion: 10.12.6 (16G8c)
5:672  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_DISABLE_BASESYSTEM_
5:672  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
5:826  0:154  === [ PatchSmbios ] =======================================
5:826  0:000  insert table 9 for dev 0:0
5:826  0:000  insert table 9 for dev 0:1
5:826  0:000  insert table 9 for dev 0:0
5:827  0:000  Trusting SMBIOS...
5:827  0:000  Channels: 1
5:827  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5:827  0:000   partNum=CMK8GX4M1A2400C14   
5:827  0:000  SMBIOS Type 17 Index = 0 => 0 0:
5:827  0:000   DIMM1 2133MHz 8192MB
5:827  0:000  SMBIOS Type 17 Index = 1 => 1 1:
5:827  0:000   DIMM2 EMPTY
5:827  0:000  SMBIOS Type 17 Index = 2 => 2 2:
5:827  0:000   DIMM3 EMPTY
5:827  0:000  SMBIOS Type 17 Index = 3 => 3 3:
5:827  0:000   DIMM4 EMPTY
5:827  0:000  mTotalSystemMemory = 8192
5:827  0:000  NumberOfMemoryDevices = 4
5:827  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
5:827  0:000  === [ PatchACPI ] =========================================
5:827  0:000  RSDT 0xCCC24028
5:827  0:000  FADT from RSDT: 0xCCC24160
5:827  0:000  XSDT 0xCCC240A0
5:827  0:000  FADT from XSDT: 0xCCC2C248
5:827  0:000  Xsdt reallocation done
5:827  0:000  old FADT length=114
5:827  0:000  Apply DsdtFixMask=0x00000000
5:827  0:000     drop _DSM mask=0x0000
5:827  0:000  === [ FixBiosDsdt ] =======================================
5:827  0:000  USBADR[0] = 0x10003 and PCIe = 0x0
5:827  0:000  USBADR[1] = 0x10003 and PCIe = 0x2
5:827  0:000  VideoCard devID=0x679A1002
5:827  0:000  DisplayADR1[0] = 0x30001, DisplayADR2[0] = 0x0
5:827  0:000  USBADR[2] = 0x70001 and PCIe = 0x3
5:861  0:033  first CPU found at 4209 offset 420D
5:861  0:000  score candidate at 40FC
5:861  0:000  score inserted in acpi_cpu_score _PR_
5:861  0:000  Found ACPI CPU: P000 | P001 | P002 | P003 | P004 | P005 | P006 | P007 | P008 | P009 | P00A | P00B | P00C | P00D | P00E | P00F , within the score: _PR_
5:861  0:000  Found PCIROOTUID = 0
5:861  0:000  === [ ACPIDropTables ] ====================================
5:861  0:000  === [ PatchAllSSDT ] ======================================
5:861  0:000  Patch table: SSDT  CPMCMN len=0x1664
5:861  0:000  Patch table: SSDT   len=0x8C4C
5:861  0:000  Patch table: SSDT  AmdTable len=0x20E4
5:861  0:000  Patch table: SSDT  AOD len=0x17E1
5:861  0:000  Patch table: SSDT  FCHZP len=0x24
5:861  0:000  Patch table: SSDT   len=0xF8
5:861  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
5:861  0:000   Xsdt has tables count=18
5:861  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=16
5:861  0:000  Not an Intel platform: P-States will not be generated !!!
5:861  0:000  GeneratePStates failed: Status=Not Found
5:861  0:000  SSDT with CPU C-States generated successfully
5:861  0:000  === [ RestSetup macOS ] ===================================
5:861  0:000  EdidDiscovered size=128
5:861  0:000  ------- EDID Table
5:861  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  41  0C
5:861  0:000  010  |  7B  C0  73  08  00  00  1B  16  01  03
5:861  0:000  020  |  80  30  1B  78  2A  0A  45  A7  54  4A
5:861  0:000  030  |  99  25  11  50  54  BD  4B  00  D1  C0
5:861  0:000  040  |  81  80  95  0F  95  00  B3  00  01  01
5:861  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
5:861  0:000  060  |  2D  40  58  2C  45  00  E0  0C  11  00
5:861  0:000  070  |  00  1E  00  00  00  FF  00  41  55  32
5:861  0:000  080  |  31  32  32  37  30  30  32  31  36  33
5:861  0:000  090  |  00  00  00  FC  00  32  32  37  45  4C
5:861  0:000  100  |  48  0A  20  20  20  20  20  20  00  00
5:861  0:000  110  |  00  FD  00  38  4C  1E  53  11  00  0A
5:861  0:000  120  |  20  20  20  20  20  20  00  3A
5:861  0:000  ATI injection not set
5:915  0:054   codec not detected
5:915  0:000   RCBA disabled; cannot use it
5:915  0:000  stringlength = 2230
5:915  0:000  CurrentMode: Width=1280 Height=1024
5:915  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D8B56858
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D8B56858
5:919  0:003  Use origin smbios table type 1 guid.
5:919  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:919  0:000    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
5:928  0:008    Extra kext: EFI\CLOVER\kexts\Other\HWInfo.kext
5:928  0:000  Custom boot screen not used because entry has unset use graphics

and replace by :

Archive.zip

Ciro82 · May 30, 2017

Tried, but unfortunately my system reboots after Aptiofix2 loaded...

gills83 · May 30, 2017

Tried, but unfortunately my system reboots after Aptiofix2 loaded...

rebuilt kernelcache=> prelinkedkernel

jsl · May 30, 2017

hello Bronya good job !!! :thumbsup_anim:

no works for me

-1 deleted driver64-off

-2 deleted driver64uefi

-3 deleted config.plist

important : Rebuild the kernelcache with every error you get in clover

0:100  0:100  MemLog inited, TSC freq: 2994828300
0:100  0:000  CPU was calibrated without ACPI PM Timer: Intel ICH device was not found., use RTC
0:100  0:000  
0:100  0:000  Now is 30.5.2017,  10:39:50 (GMT)
0:100  0:000  Starting Clover revision: 4078 on American Megatrends EFI
0:100  0:000  Build with: [Args: cleanlib | -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 3 cleanlib | OS: 10.9.5 | XCODE: 6.2]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48) @D8AD1B98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  SmbiosTable.Type17->Speed = 2133MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1
0:100  0:000  SmbiosTable.Type17->Vendor = Unknown
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMK8GX4M1A2400C14   
0:100  0:000  Type 17 Index = 1
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 DIMM_A2
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 2
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/3, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 3
0:100  0:000  Table has error information, checking
0:100  0:000  Found memory information in table 18/4, type=0x3, operation=0x2 syndrome=0x0
0:100  0:000  ...memory OK
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 DIMM_B2
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'System Product Name' with board 'PRIME B350M-A'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 68747541 Model=800F11
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  	Looking to disable C1E if is already enabled by the BIOS:
0:100  0:000  BrandString = AMD Ryzen 7 1700 Eight-Core Processor          
0:100  0:000  gCPUStructure.TSCFrequency: 3000
0:100  0:000  MaxRatio: f 
0:100  0:000  busFrequency: 0 MHz 
, cpuMult: 60 
, cpuFrequency: 3000 
0:100  0:000  MaxDiv/MinDiv: 30.0/7
0:100  0:000  Turbo: 0/0/0/0
0:100  0:000  Features: 0x178BFBFF
0:100  0:000  Threads: 16
0:100  0:000  Cores: 16
0:100  0:000  FSB: 25 MHz
0:100  0:000  CPU: 0 MHz
0:100  0:000  TSC: 3000 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 1022 1450 class=060000
0:100  0:000  PCI (00|00:01.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:01.03) : 1022 1453 class=060400
0:100  0:000  PCI (00|03:00.00) : 1022 43BB class=0C0330
0:100  0:000  PCI (00|03:00.01) : 1022 43B7 class=010601
0:100  0:000  PCI (00|03:00.02) : 1022 43B2 class=060400
0:100  0:000  PCI (00|1D:00.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|22:00.00) : 1B21 1343 class=0C0330
0:100  0:000  PCI (00|1D:04.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|1D:05.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|1D:06.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|25:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|1D:07.00) : 1022 43B4 class=060400
0:100  0:000  PCI (00|26:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 1 Vendor=Realtek
0:100  0:000  PCI (00|00:02.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:03.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:03.01) : 1022 1453 class=060400
0:100  0:000  PCI (00|27:00.00) : 1002 679A class=030000
0:100  0:000   - GFX: Model=AMD Radeon HD 7950/8950/R9 280 (ATI/AMD)
0:100  0:000   - RADEON_BIOS_0_SCRATCH = 0x00000050
0:100  0:000  PCI (00|27:00.01) : 1002 AAA0 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:04.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:07.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:07.01) : 1022 1454 class=060400
0:100  0:000  PCI (00|28:00.00) : 1022 145A class=130000
0:100  0:000  PCI (00|28:00.02) : 1022 1456 class=108000
0:100  0:000  PCI (00|28:00.03) : 1022 145C class=0C0330
0:100  0:000  PCI (00|00:08.00) : 1022 1452 class=060000
0:100  0:000  PCI (00|00:08.01) : 1022 1454 class=060400
0:100  0:000  PCI (00|29:00.00) : 1022 1455 class=130000
0:100  0:000  PCI (00|29:00.02) : 1022 7901 class=010601
0:100  0:000  PCI (00|29:00.03) : 1022 1457 class=040300
0:100  0:000  PCI (00|00:14.00) : 1022 790B class=0C0500
0:100  0:000  PCI (00|00:14.03) : 1022 790E class=060100
0:100  0:000  PCI (00|00:18.00) : 1022 1460 class=060000
0:100  0:000  PCI (00|00:18.01) : 1022 1461 class=060000
0:100  0:000  PCI (00|00:18.02) : 1022 1462 class=060000
0:100  0:000  PCI (00|00:18.03) : 1022 1463 class=060000
0:100  0:000  PCI (00|00:18.04) : 1022 1464 class=060000
0:100  0:000  PCI (00|00:18.05) : 1022 1465 class=060000
0:100  0:000  PCI (00|00:18.06) : 1022 1466 class=060000
0:100  0:000  PCI (00|00:18.07) : 1022 1467 class=060000
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:106  0:002  - [00]: metal
0:109  0:002  === [ Found config plists ] ===============================
0:109  0:000  - config.plist
0:110  0:001  === [ GetEarlyUserSettings ] ==============================
0:110  0:000  timeout set to 5
0:110  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:110  0:000  === [ LoadDrivers ] =======================================
0:113  0:002  Loading AppleImageCodec-64.efi  status=Success
0:118  0:004  Loading AppleKeyAggregator-64.efi  status=Success
0:120  0:002  Loading AppleUITheme-64.efi  status=Success
0:123  0:003  Loading CsmVideoDxe-64.efi  status=Success
0:125  0:002   - driver needs connecting
0:125  0:000  Loading DataHubDxe-64.efi  status=Success
0:129  0:003  Loading EmuVariableUefi-64.efi  status=Success
0:133  0:004  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:133  0:000  Loading Fat-64.efi  status=Success
0:135  0:002   - driver needs connecting
0:135  0:000  Loading FirmwareVolume-64.efi  status=Success
0:137  0:002  Loading FSInject-64.efi  status=Success
0:142  0:004  Loading OsxAptioFix2Drv-64.efi  status=Success
0:144  0:002  Loading OsxFatBinaryDrv-64.efi  status=Success
0:149  0:004  Loading PartitionDxe-64.efi  status=Success
0:151  0:002   - driver needs connecting
0:151  0:000  Loading SMCHelper-64.efi  status=Success
0:153  0:002  Loading VBoxHfs-64.efi  status=Success
0:155  0:002   - driver needs connecting
0:155  0:000  4 drivers needs connecting ...
0:155  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:155  0:000  Partition driver loaded: 
0:155  0:000  Video driver loaded: disconnect Success
0:183  0:028  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:431  0:247  CsmVideoDriverBindingStart
0:431  0:000  mixed support=40010
0:431  0:000  Controller is [030000]
0:431  0:000  Check for VBE
0:436  0:004   found Detail Timing 1920x1080
0:441  0:004    0 1280x960 attr=BB - ok, edid-
0:441  0:000    1 640x480 attr=BB - ok, edid+, 640x480, working, highest, pref=1
0:441  0:000    2 800x600 attr=BB - ok, edid+, 800x600, working, highest, pref=2
0:442  0:000    3 1024x768 attr=BB - ok, edid+, 1024x768, working, highest, pref=3
0:442  0:000    4 1280x1024 attr=BB - ok, edid+, working, highest, pref=4
0:444  0:001    5 1400x1050 attr=BB - ok, edid-
0:448  0:003    6 1920x1080 attr=BB - ok, edid+, working, highest, pref=6
0:448  0:000  CsmVideo: New mode: 6 1920x1080 - set
0:530  0:082   - SetMode pref 6 (6) = Success
0:530  0:000  CsmVideoCheckForVbe - Success
0:530  0:000  CsmVideoDriverBindingStart end Success
0:530  0:000  CsmVideo: New mode: 3 1024x768 - set
0:586  0:055  CsmVideo: New mode: 4 1280x1024 - set
0:825  0:239  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
0:978  0:153  === [ InitScreen ] ========================================
0:978  0:000  Console modes reported: 4, available modes:
0:978  0:000   - [01]: 80x25 (current mode)
0:978  0:000   - [02]: 80x50
0:978  0:000   - [03]: 100x31
0:978  0:000   - [04]: 240x56
0:978  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48)
0:978  0:000  Using embedded font: Success
0:979  0:000  === [ GetMacAddress ] =====================================
0:979  0:000  === [ ScanSPD ] ===========================================
0:979  0:000  === [ GetAcpiTablesList ] =================================
0:979  0:000  Get Acpi Tables List from RSDT:
0:979  0:000   - [00]: FACP  A M I  len=132
0:979  0:000   - [01]: APIC  A M I  len=222
0:979  0:000   - [02]: FPDT  A M I  len=68
0:979  0:000   - [03]: SSDT  CPMCMN len=5732
0:979  0:000   - [04]: SSDT   len=35916
0:979  0:000   - [05]: FIDT  A M I len=156
0:979  0:000   - [06]: SSDT  AmdTable len=8420
0:979  0:000   - [07]: SRAT  AmdTable len=304
0:979  0:000   - [08]: CRAT  AmdTable len=3920
0:979  0:000   - [09]: CDIT  AmdTable len=41
0:979  0:000   - [10]: SSDT  AOD len=6113
0:979  0:000   - [11]: MCFG  A M I len=60
0:979  0:000   - [12]: HPET  A M I len=56
0:979  0:000   - [13]: SSDT  FCHZP len=36
0:979  0:000   - [14]: UEFI   len=66
0:979  0:000   - [15]: BGRT  A M I  len=56
0:979  0:000   - [16]: IVRS   len=48
0:979  0:000   - [17]: SSDT   len=248
0:979  0:000  Calibrated TSC frequency =2994828300 =2994MHz
0:980  0:000  === [ GetUserSettings ] ===================================
0:980  0:000  USB FixOwnership: yes
0:980  0:000   - final DSDT Fix mask=00000000
0:980  0:000  ChassisType: 0x6
0:980  0:000  === [ ScanVolumes ] =======================================
0:980  0:000  Found 14 volumes with blockIO
0:980  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)
0:981  0:001          USB volume
0:981  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(1,MBR,0x00000000,0x2,0x706F48)
0:982  0:001          Result of bootcode detection: bootable unknown (legacy)
0:982  0:000          USB volume
0:982  0:000          This is SelfVolume !!
0:982  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x0)\USB(0xC,0x0)\HD(2,MBR,0x00000000,0x706F4B,0x33E90B5)
0:984  0:001          USB volume
0:984  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)
0:984  0:000          Result of bootcode detection: bootable unknown (legacy)
0:984  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)
0:985  0:000          Result of bootcode detection: bootable unknown (legacy)
0:985  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,5BD73122-E8B1-4B53-B8B6-1F4EA14260FD,0x28,0x64000)
0:985  0:000          Result of bootcode detection: bootable Clover (clover)
0:985  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,8046A2D7-7733-48D7-8A66-71E28C503EB0,0x64028,0x200000)
0:986  0:000          Result of bootcode detection: bootable unknown (legacy)
0:986  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,C885BB11-1DC8-427E-A2C0-FBE08BEC4B1F,0x2A4028,0x1AB729A0)
0:987  0:000          Result of bootcode detection: bootable unknown (legacy)
0:987  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
0:987  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,5250A8D7-1783-4CD6-A148-F06EAB9A3638,0x35ABF288,0x135F20)
0:988  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(6,GPT,D712D9E7-EA6C-4186-824D-48B695448763,0x35BF51A8,0x1B7245C0)
0:988  0:000          Result of bootcode detection: bootable unknown (legacy)
0:988  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(7,GPT,88AF86BB-6C54-4A59-B4E5-8D32D417A23D,0x51359768,0x2336D620)
0:989  0:000          Result of bootcode detection: bootable unknown (legacy)
0:989  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x17CF17CE,0x800,0xFA000)
1:007  0:017          Result of bootcode detection: bootable Windows (vista,win)
1:007  0:000  - [13]: Volume: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x1,0xFFFF,0x0)\HD(2,MBR,0x17CF17CE,0xFA800,0x25333800)
1:007  0:000          Result of bootcode detection: bootable Windows (vista,win)
1:117  0:109  Loading nvram.plist from Vol 'EFI' - loaded, size=2438
1:130  0:013  === [ PutNvramPlistToRtVars ] =============================
1:130  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
1:130  0:000   Skipping EmuVariableUefiPresent
1:130  0:000   Adding Key: backlight-level: Size = 2, Data: FF FF 
1:130  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
1:130  0:000   Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 
1:130  0:000   Adding Key: efi-boot-device: Size = 216, Data: 3C 61 72 72 61 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 50 72 6F 76 69 64 65 72 43 6C 61 73 73 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 49 4F 4D 65 64 69 61 3C 2F 73 74 72 69 6E 67 3E 3C 6B 65 79 3E 49 4F 50 72 6F 70 65 72 74 79 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 55 55 49 44 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 34 31 46 38 35 39 31 35 2D 42 30 36 31 2D 34 37 31 31 2D 42 30 42 35 2D 33 30 31 34 30 44 45 34 38 46 31 44 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 61 72 72 61 79 3E 
1:130  0:000   Adding Key: efi-boot-device-data: Size = 80, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 03 01 01 01 06 00 01 00 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 04 00 00 00 E8 C8 F4 1A 00 00 00 00 A0 29 B7 1A 00 00 00 00 15 59 F8 41 61 B0 11 47 B0 B5 30 14 0D E4 8F 1D 02 02 7F FF 04 00 
1:130  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 12 
1:130  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
1:130  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
1:130  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-BBIN-ui8: Size = 1, Data: 01 
1:130  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 06 F0 F0 00 
1:130  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
1:130  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
1:130  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
1:130  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
1:130  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 39 30 00 00 00 00 00 
1:130  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 20 0F 00 00 18 
1:130  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
1:130  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 39 30 00 00 00 00 00 
1:130  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
1:130  0:000   Adding Key: fmm-computer-name: Size = 15, Data: 4D 61 63 20 50 72 6F 20 64 65 20 67 69 6C 73 
1:130  0:000   Adding Key: platform-uuid: Size = 16, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
1:130  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
1:130  0:000   Adding Key: specialbootdevice: Size = 80, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 03 01 01 01 06 00 01 00 03 12 0A 00 00 00 FF FF 00 00 04 01 2A 00 04 00 00 00 E8 C8 F4 1A 00 00 00 00 A0 29 B7 1A 00 00 00 00 15 59 F8 41 61 B0 11 47 B0 B5 30 14 0D E4 8F 1D 02 02 7F FF 04 00 
1:130  0:000  === [ InitTheme ] =========================================
1:130  0:000  no default theme, get random theme metal
1:131  0:000  Using theme 'metal' (EFI\CLOVER\themes\metal)
1:135  0:004  Loading font from ThemeDir: Success
1:136  0:000  Choosing theme metal
1:136  0:000  after NVRAM boot-args=-v dart=0 npci=0x2000 rootless=0 keepsyms=1 kextlog=0xffff
1:136  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:136  0:000  found AppleSMC protocol
1:137  0:000  === [ ScanLoader ] ========================================
1:137  0:000  - [01]: 'CLOVER'
1:143  0:006  - [02]: 'OS X Base System'
1:149  0:005          AddLoaderEntry for Volume Name=OS X Base System
1:153  0:004      Check if volume Is Hibernated:
1:153  0:000      Check sleep image 'by signature':
1:162  0:008      using default sleep image name = \private\var\vm\sleepimage
1:169  0:007      sleepimage not found -> Not Found
1:169  0:000      hibernated: no - sign
1:180  0:010  - [05]: 'EFI'
1:199  0:018  - [06]: 'SANS TITRE'
1:202  0:003  - [07]: 'MacHDD'
1:236  0:033          AddLoaderEntry for Volume Name=MacHDD
1:257  0:020      Check if volume Is Hibernated:
1:257  0:000      Check sleep image 'by signature':
1:302  0:045      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:302  0:000      SleepImage name from pref: ImageVolume = 'MacHDD', ImageName = '\private\var\vm\sleepimage'
1:328  0:025      sleepimage not found -> Not Found
1:328  0:000      hibernated: no - sign
1:397  0:068  - [08]: 'Sierra'
1:428  0:031          AddLoaderEntry for Volume Name=Sierra
1:454  0:026      Check if volume Is Hibernated:
1:454  0:000      Check sleep image 'by signature':
1:503  0:048      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:503  0:000      using default sleep image name = \private\var\vm\sleepimage
1:543  0:040      sleepimage not found -> Not Found
1:543  0:000      hibernated: no - sign
1:613  0:069  - [09]: 'Recovery HD'
1:614  0:000          AddLoaderEntry for Volume Name=Recovery HD
1:631  0:017  - [10]: 'boli'
1:645  0:014          AddLoaderEntry for Volume Name=boli
1:664  0:018      Check if volume Is Hibernated:
1:664  0:000      Check sleep image 'by signature':
1:681  0:016      using default sleep image name = \private\var\vm\sleepimage
1:704  0:022      sleepimage not found -> Not Found
1:704  0:000      hibernated: no - sign
1:775  0:070  - [12]: 'Réservé au système'
1:778  0:003  - [13]: ''
1:782  0:003  Scanning legacy ...
1:782  0:000   5: 'EFI' (clover) add legacy
1:786  0:003   added 'Boot Clover from EFI' OSType=3 Icon=clover
1:786  0:000  12: 'Réservé au système' (vista,win) add legacy
1:786  0:000          [!] Icon 18 (icons\vol_internal_ntfs.icns) not found (path: EFI\CLOVER\themes\metal)
1:787  0:000   added 'Boot Windows from Réservé au système' OSType=2 Icon=vista,win
1:787  0:000  13: '' (vista,win) add legacy
1:787  0:000   added 'Boot Windows from ' OSType=2 Icon=vista,win
1:787  0:000  === [ AddCustomTool ] =====================================
1:790  0:003  found tool \EFI\CLOVER\tools\Shell64U.efi
1:790  0:000  Checking EFI partition Volume 5 for Clover
1:790  0:000   Found Clover
1:793  0:003  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:794  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
1:948  0:153  === [ GetEfiBootDeviceFromNvram ] =========================
1:948  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
1:948  0:000    - Volume: 'PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)'
1:948  0:000    - LoaderPath: '<null string>'
1:948  0:000    - Guid = 41F85915-B061-4711-B0B5-30140DE48F1D
1:948  0:000  === [ FindStartupDiskVolume ] =============================
1:948  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1,0x3)\Pci(0x0,0x1)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,41F85915-B061-4711-B0B5-30140DE48F1D,0x1AF4C8E8,0x1AB729A0)
1:948  0:000     - searching for that partition
1:948  0:000      - found entry 2. 'Boot macOS from Sierra', Volume 'Sierra'
1:948  0:000  Boot redirected to Entry 2. 'Boot macOS from Sierra'
1:948  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
1:948  0:000  DefaultIndex=2 and MainMenu.EntryCount=14
2:241  0:293  GUI ready
5:563  3:322  Boot option Boot0000 not found
5:563  0:000  === [ StartLoader ] =======================================
5:563  0:000  Finally: Bus=99827kHz CPU=2995MHz
5:563  0:000  Loading boot.efi  status=Success
5:672  0:108  GetOSVersion: 10.12.6 (16G8c)
5:672  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_DISABLE_BASESYSTEM_
5:672  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
5:826  0:154  === [ PatchSmbios ] =======================================
5:826  0:000  insert table 9 for dev 0:0
5:826  0:000  insert table 9 for dev 0:1
5:826  0:000  insert table 9 for dev 0:0
5:827  0:000  Trusting SMBIOS...
5:827  0:000  Channels: 1
5:827  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5:827  0:000   partNum=CMK8GX4M1A2400C14   
5:827  0:000  SMBIOS Type 17 Index = 0 => 0 0:
5:827  0:000   DIMM1 2133MHz 8192MB
5:827  0:000  SMBIOS Type 17 Index = 1 => 1 1:
5:827  0:000   DIMM2 EMPTY
5:827  0:000  SMBIOS Type 17 Index = 2 => 2 2:
5:827  0:000   DIMM3 EMPTY
5:827  0:000  SMBIOS Type 17 Index = 3 => 3 3:
5:827  0:000   DIMM4 EMPTY
5:827  0:000  mTotalSystemMemory = 8192
5:827  0:000  NumberOfMemoryDevices = 4
5:827  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
5:827  0:000  === [ PatchACPI ] =========================================
5:827  0:000  RSDT 0xCCC24028
5:827  0:000  FADT from RSDT: 0xCCC24160
5:827  0:000  XSDT 0xCCC240A0
5:827  0:000  FADT from XSDT: 0xCCC2C248
5:827  0:000  Xsdt reallocation done
5:827  0:000  old FADT length=114
5:827  0:000  Apply DsdtFixMask=0x00000000
5:827  0:000     drop _DSM mask=0x0000
5:827  0:000  === [ FixBiosDsdt ] =======================================
5:827  0:000  USBADR[0] = 0x10003 and PCIe = 0x0
5:827  0:000  USBADR[1] = 0x10003 and PCIe = 0x2
5:827  0:000  VideoCard devID=0x679A1002
5:827  0:000  DisplayADR1[0] = 0x30001, DisplayADR2[0] = 0x0
5:827  0:000  USBADR[2] = 0x70001 and PCIe = 0x3
5:861  0:033  first CPU found at 4209 offset 420D
5:861  0:000  score candidate at 40FC
5:861  0:000  score inserted in acpi_cpu_score _PR_
5:861  0:000  Found ACPI CPU: P000 | P001 | P002 | P003 | P004 | P005 | P006 | P007 | P008 | P009 | P00A | P00B | P00C | P00D | P00E | P00F , within the score: _PR_
5:861  0:000  Found PCIROOTUID = 0
5:861  0:000  === [ ACPIDropTables ] ====================================
5:861  0:000  === [ PatchAllSSDT ] ======================================
5:861  0:000  Patch table: SSDT  CPMCMN len=0x1664
5:861  0:000  Patch table: SSDT   len=0x8C4C
5:861  0:000  Patch table: SSDT  AmdTable len=0x20E4
5:861  0:000  Patch table: SSDT  AOD len=0x17E1
5:861  0:000  Patch table: SSDT  FCHZP len=0x24
5:861  0:000  Patch table: SSDT   len=0xF8
5:861  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
5:861  0:000   Xsdt has tables count=18
5:861  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=16
5:861  0:000  Not an Intel platform: P-States will not be generated !!!
5:861  0:000  GeneratePStates failed: Status=Not Found
5:861  0:000  SSDT with CPU C-States generated successfully
5:861  0:000  === [ RestSetup macOS ] ===================================
5:861  0:000  EdidDiscovered size=128
5:861  0:000  ------- EDID Table
5:861  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  41  0C
5:861  0:000  010  |  7B  C0  73  08  00  00  1B  16  01  03
5:861  0:000  020  |  80  30  1B  78  2A  0A  45  A7  54  4A
5:861  0:000  030  |  99  25  11  50  54  BD  4B  00  D1  C0
5:861  0:000  040  |  81  80  95  0F  95  00  B3  00  01  01
5:861  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
5:861  0:000  060  |  2D  40  58  2C  45  00  E0  0C  11  00
5:861  0:000  070  |  00  1E  00  00  00  FF  00  41  55  32
5:861  0:000  080  |  31  32  32  37  30  30  32  31  36  33
5:861  0:000  090  |  00  00  00  FC  00  32  32  37  45  4C
5:861  0:000  100  |  48  0A  20  20  20  20  20  20  00  00
5:861  0:000  110  |  00  FD  00  38  4C  1E  53  11  00  0A
5:861  0:000  120  |  20  20  20  20  20  20  00  3A
5:861  0:000  ATI injection not set
5:915  0:054   codec not detected
5:915  0:000   RCBA disabled; cannot use it
5:915  0:000  stringlength = 2230
5:915  0:000  CurrentMode: Width=1280 Height=1024
5:915  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D8B56858
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D8B56858
5:919  0:003  Use origin smbios table type 1 guid.
5:919  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:919  0:000    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
5:928  0:008    Extra kext: EFI\CLOVER\kexts\Other\HWInfo.kext
5:928  0:000  Custom boot screen not used because entry has unset use graphics

and replace by :

Thanks and follow your advice there is some progress for Clover booting.

It hanged at checking unused kexts autounloaded ......

Any suggestion to fix it ?

[Edit]

At last I can boot by Clover to desktop at 10.12.5 and solve my Shutdown/Restart issues too.

But it got the lowest performance scores in Cinebench R15 was one disadvantage.

Another bug was boot for 10.9.5 will got too fast timers again and too low performance in Cinebench R15 (much lower than previous kernel too).

So I need figure out the reason and the solution as soon as possible for my Ryzen 1700X hackintosh if I want to boot by Clover r4078.

The key components are properly edit of papiercul's config.plist to fix my Ryzen 1700X hackintosh.

config.plist.zip

[RYZEN] macOS 10.12.x (Sierra) Kernel Research&Development Thread

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites