MaLd0n Posted June 1, 2017 Author Share Posted June 1, 2017 if u have a time, use a fresh install install Clover in ESP and boot0ss replace folder and test U can try a darkwake=8 e.g 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 Hi MaLd0n New to the discussion, I have a build based on the Z170M plus using a i7 6700K and Asus GTX 1060 that's working pretty well with no SSDT or DSDT's installed but I think I need to have a look at using a DSDT as my internal USB header isn't working for my PCIE wifi/Bluetooth card. My question is can I use your DSDT as is or do I need to have one specific for my processor? I'm a little wary of changing too much as it's working pretty well except for the above issues. Any help will be appreciated. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 Hi MaLd0n New to the discussion, I have a build based on the Z170M plus using a i7 6700K and Asus GTX 1060 that's working pretty well with no SSDT or DSDT's installed but I think I need to have a look at using a DSDT as my internal USB header isn't working for my PCIE wifi/Bluetooth card. My question is can I use your DSDT as is or do I need to have one specific for my processor? I'm a little wary of changing too much as it's working pretty well except for the above issues. Any help will be appreciated. All hacks need DSDT, if u dont like or have time to edits, Clover have good and essentials patches. Post ur DSDT here 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 All hacks need DSDT, if u dont like or have time to edits, Clover have good and essentials patches. Post ur DSDT here Thanks for your reply, I've relied on a combination of [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and clover configurator to get my build working and as it's my first build I'm not 100% sure of the use of DSDT and SSDT's are, hence my post. Am I right in thinking a correct DSDT will resolve my USB header issue?. I'll upload my DSDT later, thanks. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 What problem u have with USB? 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 What problem u have with USB? I don't think the MLB usb header is detected as it's not powering the Bluetooth on my PCI wifi/Bluetooth card. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 Thanks I will attempt to do that later this evening. 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 Here are the requested files. Clover ioreg Send Me Thanks 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 Here are the requested files. Clover ioreg Send Me Thanks Use all kexts in Clover/Kexts/Other CLOVER.zip Generate ur SSDT PM with Pike Script ssdtPRGen.command.zip send me new ioreg after reboot 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 Use all kexts in Clover/Kexts/Other CLOVER.zip Generate ur SSDT PM with Pike Script ssdtPRGen.command.zip send me new ioreg after reboot Sorry I'm not sure what you want me to do? replace my Clover folder in EFI with the one you posted? What do I do with the generated SSDT? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 Yes, replace SSDT.aml in Clover/Acpi/Patched 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 Yes, replace SSDT.aml in Clover/Acpi/Patched WOW I didn't expect it to boot lol. I can see PCI devices in System Report now Fans going crazy however, think the new clover folder doesn't have the fakeSMC sensors present, Is it safe to put these back? Here is my new ioreg: https://www.dropbox.com/s/26go1mj3t8i94fx/iMac%20New%20ioreg.zip?dl=0 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 if u need a sensors, use it just replace in Clover/Kexts/Others FakeSMC.SENSORS.zip btw, i dont like it, cause many problems in some hardwares ioreg is good, native pm and all patches for iMac17,1 loaded 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 I've noticed sleep isn't working as before, display goes to sleep then a few seconds later the computer does but it wakes up straight away but the display doesn't, this seems to loop 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 try with fakesmc mod FakeSMC.kext.zip run KextUtility Kext Utility.app.zip Reboot after reboot, put pc in sleep, wait for problem and run in terminal log show --style syslog | fgrep "Wake reason" 1 Link to comment Share on other sites More sharing options...
apt Posted June 2, 2017 Share Posted June 2, 2017 try with fakesmc mod FakeSMC.kext.zip run KextUtility Kext Utility.app.zip Reboot after reboot, put pc in sleep, wait for problem and run in terminal log show --style syslog | fgrep "Wake reason" Issue still happening after FakeSMC mod. output from terminal: 2017-06-02 23:24:47.681773+0100 localhost kernel[0]: (AppleACPIPlatform) Wake reason: XDCI XHC 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 2, 2017 Author Share Posted June 2, 2017 try it DSDT.aml.zip use power button for wake 1 Link to comment Share on other sites More sharing options...
apt Posted June 3, 2017 Share Posted June 3, 2017 try it DSDT.aml.zip use power button for wake Not having chance to wake using power button as still waking from sleep on its own and giving same wake error: 2017-05-10 20:52:25.659033+0100 localhost kernel[0]: (AppleACPIPlatform) Wake reason: XDCI XHC try with fakesmc mod FakeSMC.kext.zip run KextUtility Kext Utility.app.zip Going back to when you asked for me to try the FakeSMC mod, I seem to have two, one in S/L/E and one in EFI/Clover/kexts/Other Which one should I have replaced? Does clover use the one in EFI because we have kexts injection enabled? Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2017 Author Share Posted June 3, 2017 use all kexts in Clover/KextsOther and kexts injection enabled 1 Link to comment Share on other sites More sharing options...
apt Posted June 3, 2017 Share Posted June 3, 2017 use all kexts in Clover/KextsOther and kexts injection enabled So I can safely remove the FakeSMC from S/L/E? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2017 Author Share Posted June 3, 2017 ofc u dont need s/l/e 1 Link to comment Share on other sites More sharing options...
apt Posted June 3, 2017 Share Posted June 3, 2017 That's great thanks for clarification, any ideas why its still waking from sleep? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted June 3, 2017 Author Share Posted June 3, 2017 run it and post new files, i need check if DSD is load, prw is removed, the usb dont have power for wake now, strange issue RunMe.app.zip Link to comment Share on other sites More sharing options...
apt Posted June 3, 2017 Share Posted June 3, 2017 run it and post new files, i need check if DSD is load, prw is removed, the usb dont have power for wake now, strange issue RunMe.app.zip As requested, thanks. https://www.dropbox.com/s/d3ox9xz3dwrx95u/Send%20me%20iMac%20Updated.zip?dl=0 1 Link to comment Share on other sites More sharing options...
Recommended Posts