Hackentoshe Posted November 24, 2017 Share Posted November 24, 2017 Hi, sorry for the limited information I gave earlier. I had some battery issues that I had to get repaired, and long story short, a dell technician replaced my motherboard and battery. I was forced to reinstall and format the whole disk because of this. Now I am trying to install Mac OSX, but the installer will not recognize the SSD. I have a pm951 512gb SSD. I am running the bios version 1.5.1. here is a picture of the problem. any suggestions? Link to comment Share on other sites More sharing options...
Krim404 Posted November 24, 2017 Author Share Posted November 24, 2017 Hi, sorry for the limited information I gave earlier. I had some battery issues that I had to get repaired, and long story short, a dell technician replaced my motherboard and battery. I was forced to reinstall and format the whole disk because of this. Now I am trying to install Mac OSX, but the installer will not recognize the SSD. I have a pm951 512gb SSD. I am running the bios version 1.5.1. here is a picture of the problem. any suggestions? OSX10.12 or 10.13? Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 24, 2017 Share Posted November 24, 2017 10.13, lastest installer from mac app store Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 24, 2017 Share Posted November 24, 2017 That's weird, after a couple of reboots, problem fixed itself. Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 26, 2017 Share Posted November 26, 2017 So I finally finished the post install, and I tried to change my smbios to macbook pro 13,3. I got a kernel panic as shown in the pictures. Any way I can get past this? thanks so much Link to comment Share on other sites More sharing options...
Krim404 Posted November 26, 2017 Author Share Posted November 26, 2017 So I finally finished the post install, and I tried to change my smbios to macbook pro 13,3. I got a kernel panic as shown in the pictures. Any way I can get past this? thanks so much you have to create VALID 13,3 credentials. you cant just enter anything. Please read the corresponding threads Link to comment Share on other sites More sharing options...
hackedWifi Posted November 26, 2017 Share Posted November 26, 2017 So I finally finished the post install, and I tried to change my smbios to macbook pro 13,3. I got a kernel panic as shown in the pictures. Any way I can get past this? thanks so much You must read the entire tutorial my friend. Your answer it is right there. You probably overpass it. You have to create a invalid SMBIOS then you go over the apple check. This is to make sure your SMBIOS is not already been used. Then... Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 26, 2017 Share Posted November 26, 2017 You must read the entire tutorial my friend. Your answer it is right there. You probably overpass it. You have to create a invalid SMBIOS then you go over the apple check. This is to make sure your SMBIOS is not already been used. Then... Sent from my Pixel XL using Tapatalk you have to create VALID 13,3 credentials. you cant just enter anything. Please read the corresponding threads I have done these things, or so I think. I made sure that my smbios is invalid, and checked it with apple. I followed many guides on creating proper smbios. I have attached my config.plist. I am sorry for my ignorance, I am just not sure of why my system won't boot with my desired SMbios. Thanks for the help! config.plist.zip Link to comment Share on other sites More sharing options...
hackedWifi Posted November 27, 2017 Share Posted November 27, 2017 I have done these things, or so I think. I made sure that my smbios is invalid, and checked it with apple. I followed many guides on creating proper smbios. I have attached my config.plist. I am sorry for my ignorance, I am just not sure of why my system won't boot with my desired SMbios. Thanks for the help!I am using Mac pro 13.3 too. I have check the fix the truncation error on clover too. Mine works just fine Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
Mr.C Posted November 28, 2017 Share Posted November 28, 2017 HI all! It seems like I have to buy a new ssd, can't bring it back to life (1 TB Toshiba nvme) So what do you recommend to buy from these options? - Samsung PM951 - Samsung SM951 - Toshiba XG4 I need just an 512 gb version. Do you have any experience with one of them? AFAIK all of it is compatible with hackintosh HS. Thank you for your help! Link to comment Share on other sites More sharing options...
Gymnae Posted November 28, 2017 Share Posted November 28, 2017 After double checking left-over kexts in S/L/E and other locations, rebuilding the kext cache my system boots up at normal speed again. I still notice an increased battery drain during sleep (HWP is enabled) and I miss some of the brightness steps. We're back to a higher level of brightness on lowest level. Or did Dell play with their BIOS again? Cheers Link to comment Share on other sites More sharing options...
Krim404 Posted November 29, 2017 Author Share Posted November 29, 2017 After double checking left-over kexts in S/L/E and other locations, rebuilding the kext cache my system boots up at normal speed again. I still notice an increased battery drain during sleep (HWP is enabled) and I miss some of the brightness steps. We're back to a higher level of brightness on lowest level. Or did Dell play with their BIOS again? Cheers the applebacklight inject just doesnt have my optimization in it - because some people were not happy with my brightness curve. 1 Link to comment Share on other sites More sharing options...
Gymnae Posted November 29, 2017 Share Posted November 29, 2017 the applebacklight inject just doesnt have my optimization in it - because some people were not happy with my brightness curve. those people have no taste! Link to comment Share on other sites More sharing options...
serg992313 Posted November 29, 2017 Share Posted November 29, 2017 Installed 10.13, with MacBook pro 13.3 and BIOS 1.5.1. Everything working perfect, smooth and fast. If compare with 10.12 HD530 work more faster about 20% more in games, but test result same as before. Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 29, 2017 Share Posted November 29, 2017 Installed 10.13, with MacBook pro 13.3 and BIOS 1.5.1. Everything working perfect, smooth and fast. If compare with 10.12 HD530 work more faster about 20% more in games, but test result same as before. Sorry for the trouble, but could you tell me how you created your config plist with the macbook pro 13.3 smbios? Link to comment Share on other sites More sharing options...
serg992313 Posted November 29, 2017 Share Posted November 29, 2017 Try to use my config as example config.plist.zip Link to comment Share on other sites More sharing options...
Hackentoshe Posted November 29, 2017 Share Posted November 29, 2017 Try to use my config as example thanks so much! Link to comment Share on other sites More sharing options...
Gymnae Posted November 30, 2017 Share Posted November 30, 2017 Is it the desired behavior that the current WiFi connection is shown in the Ethernet NIC? WiFi is shown as disabled and Ethernet acts as WiFi.. Also, a manually set MTU (which I require because my ISP is an idiot) gets deleted upon applying. Link to comment Share on other sites More sharing options...
Krim404 Posted November 30, 2017 Author Share Posted November 30, 2017 Is it the desired behavior that the current WiFi connection is shown in the Ethernet NIC? WiFi is shown as disabled and Ethernet acts as WiFi.. Also, a manually set MTU (which I require because my ISP is an idiot) gets deleted upon applying. ehm nope. Link to comment Share on other sites More sharing options...
Gymnae Posted December 3, 2017 Share Posted December 3, 2017 I fixed it by deleting the network interfaces preferences and deleting all NICs from preferences and starting fresh. Link to comment Share on other sites More sharing options...
Gorelander Posted December 3, 2017 Share Posted December 3, 2017 What do you guys think about doing some sort of gofundme/ kickstarter to raise money to get a developer to finish the SD card reader drivers for MacOS? I think that would be the icing on the cake to get that working. Link to comment Share on other sites More sharing options...
Gymnae Posted December 3, 2017 Share Posted December 3, 2017 What do you guys think about doing some sort of gofundme/ kickstarter to raise money to get a developer to finish the SD card reader drivers for MacOS? I think that would be the icing on the cake to get that working. This is against the rules of the hackintosh communities. Is anybody using HWP speedShift with the current release. Battery life is not good so far. Sleep uses a lot of battery too. You can try http://www.insanelymac.com/forum/topic/321021-guide-hwpintel-speed-shift-enable-with-full-power-management/?p=2365608- all you need to do is to add SSDT-pr.aml to your install and enable HWP in the clover config, since the reboot patch is already in place. I'm running this setup now and I think HWP is working and sleep is not draining that bad. But haven't run appleinfokext yet. Link to comment Share on other sites More sharing options...
gujiangjiang Posted December 7, 2017 Share Posted December 7, 2017 Can’t update 10.13.2 Update from AppStore Clean install from u-disk Still this error. 从我的 iPhone 发送，使用 Tapatalk Link to comment Share on other sites More sharing options...
Guest Posted December 8, 2017 Share Posted December 8, 2017 How to get HDMI audio to work? Link to comment Share on other sites More sharing options...
hackedWifi Posted December 8, 2017 Share Posted December 8, 2017 How to get HDMI audio to work?Step 7 my friend. You cant skim through a tutorial. You must read it before attempting to execute it Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts