JahStories Posted January 18, 2017 Author Share Posted January 18, 2017 Please, if you wanna discuss NVME use PM or open a specific thread, cause as written on the main post and on the file pack, thats not supported. Link to comment Share on other sites More sharing options...
Nightdrive Posted January 18, 2017 Share Posted January 18, 2017 @ClaudesTech: Can you tell me what kind of patches has been aplied to DSDT and SSDT files? I was told that i'll have to re-patch after i changed DVMT-prealloc to 96MB Link to comment Share on other sites More sharing options...
JahStories Posted January 18, 2017 Author Share Posted January 18, 2017 That error got nothing to do with the DVMT, I strongly suggest you to switch everything to standard again! (not to the DVMT minsizestolen patch) There are many common patches in the DSDT some were not applied from repos but written by hand... I don't remember each one but remember that every table is patched to match the provided DSDT and will not work as expected when using another one, probably not properly patched. The guide is simple, the files come in a complete package that have to be used and upgraded using every file and every preference as suggested. Any other kind of installation is not supported and could (or most obviously will) create problems that aren't easy to "debug" Hope you understand! 2 Link to comment Share on other sites More sharing options...
kevin_1351 Posted January 18, 2017 Share Posted January 18, 2017 @ClaudesTech: Can you tell me what kind of patches has been aplied to DSDT and SSDT files? I was told that i'll have to re-patch after i changed DVMT-prealloc to 96MB If you really wanna know, disassemble the asl files with iasl. And use a diff tool like BeyondCompare to see the changes. It's really easy. Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Nightdrive Posted January 18, 2017 Share Posted January 18, 2017 That error got nothing to do with the DVMT, I strongly suggest you to switch everything to standard again! That was the final hint! I set DVMT back to normal and the installer is running now. But now the internal drive is not recognized Link to comment Share on other sites More sharing options...
JahStories Posted January 18, 2017 Author Share Posted January 18, 2017 hahahaha never experiment strange things if its working for others without any trouble Link to comment Share on other sites More sharing options...
kevin_1351 Posted January 18, 2017 Share Posted January 18, 2017 That was the final hint! I set DVMT back to normal and the installer is running now. But now the internal drive is not recognized Use hfsplus.efi instead of the one coming with clover and try again. Link to comment Share on other sites More sharing options...
JahStories Posted January 18, 2017 Author Share Posted January 18, 2017 Please as said before discuss NVME on another thread or via PM Link to comment Share on other sites More sharing options...
PippoX0 Posted January 23, 2017 Share Posted January 23, 2017 XiaoMi notebook Air -> a very good Hackintosh ... Surely to be tested .... Link to comment Share on other sites More sharing options...
JahStories Posted January 23, 2017 Author Share Posted January 23, 2017 @pippox0 It's a very good hack, the only issue is the lid usb problem explained on the first post... Surely to be tested .... ?? Link to comment Share on other sites More sharing options...
PippoX0 Posted January 24, 2017 Share Posted January 24, 2017 I would like to pick one to experiment Osx on it. Maybe i will buy it ... 1 Link to comment Share on other sites More sharing options...
mareikewager Posted January 24, 2017 Share Posted January 24, 2017 Thx ClaudesTech for your great work! The only issue I have to face is that the volume & screen brightness keys don't work from time to time. Do you have a clue why? 1 Link to comment Share on other sites More sharing options...
JahStories Posted January 25, 2017 Author Share Posted January 25, 2017 I fixed that bug, will be posted in the next update... Edit. Fixed on 1.08 Link to comment Share on other sites More sharing options...
Kiaan Posted January 28, 2017 Share Posted January 28, 2017 Hi Claude! Well first of: Thank you so much for your efford putting this package together! U saved me a hell of a lot time Was a joy to install osx on this little {censored} :b I were a bit in trouble when it came to the IntelFramebuffer kext, the patch wasnt included in the pack wasnt it? However, found it here and now im happy 2 Things: - When I boot Windows from clover touchpad is not working at all....you knwo why this happens? :/ - 2cnd thing is in OSX double tab and hold to drag wont work..is there maybe an option I am missing? cheers mate EDIT: Found that the option is in accessibility option pane not in the trackpad one....haha working now. Love it. Link to comment Share on other sites More sharing options...
JahStories Posted January 28, 2017 Author Share Posted January 28, 2017 Hey! Glad you like the package! I've no problems when booting Windows from clover... touchpad is working... Don't know whats the issue Link to comment Share on other sites More sharing options...
Kiaan Posted January 28, 2017 Share Posted January 28, 2017 Hey! Glad you like the package! I've no problems when booting Windows from clover... touchpad is working... Don't know whats the issue Well after I fidled around with the touchpad and keyboard for some time it was fine. I have no idea what caused this..maybe the firmware was a little bit messy...but now everything is perfect. thanks a ton 1 Link to comment Share on other sites More sharing options...
JahStories Posted January 28, 2017 Author Share Posted January 28, 2017 You welcome! Have fun! Link to comment Share on other sites More sharing options...
marko.m Posted January 29, 2017 Share Posted January 29, 2017 Is it possible to use external display? Link to comment Share on other sites More sharing options...
JahStories Posted January 29, 2017 Author Share Posted January 29, 2017 yes, both type-c HDMI and HDMI ports are working, keep in mind that you can't use VGA adapters cause those are not supported on macOS... 1 Link to comment Share on other sites More sharing options...
mareikewager Posted January 30, 2017 Share Posted January 30, 2017 I fixed that bug, will be posted in the next update... Edit. Fixed on 1.08 The screen brightness buttons (F4 & F5) are behavior now as they should. Unfortunately this isn't the case for the volume keys. The only working combination to lower or raise the volume is FN + F11 & FN + F12. :/ Link to comment Share on other sites More sharing options...
JahStories Posted January 30, 2017 Author Share Posted January 30, 2017 don't know, on 1.08 keys are working for me... f2 lower the volume, f3 rise it. Fn f11 and Fn f12 do nothing here Link to comment Share on other sites More sharing options...
vinhkm6 Posted February 5, 2017 Share Posted February 5, 2017 You can do it on an old g3 works only with jaguar XD hahah just joking can you share experation for me installed by usb on mac mni PPC G4? tks you Link to comment Share on other sites More sharing options...
JahStories Posted February 5, 2017 Author Share Posted February 5, 2017 Ohhh, sorry, that was just a joke about a mistake a user made about macOS version, he wrote 10.2 instead of 10.12... Link to comment Share on other sites More sharing options...
goji Posted February 24, 2017 Share Posted February 24, 2017 Been so long i haven't been on this board.. I have this device. Just made bootable USB drive, i see clover interface but no apple logo or anything to boot..? Perhaps it's cause i skipped the "add serial number" part, which i have no idea how to proceed.. And actually, when i typed the given code on terminal (using 10.6.6, only system i got here), i got an error message (segmentation something). So i used the "restore" function of disk utility before installing clover & copying files. Another issue i have is after i unplug/replug the drive, the EFI partition doesn't show up anymore, so i can't change files.. Originally i wanted to do a legacy boot drive but it does not seem possible..? Link to comment Share on other sites More sharing options...
JahStories Posted February 24, 2017 Author Share Posted February 24, 2017 use the command you find here to create the bootable pen drive... Link to comment Share on other sites More sharing options...
Recommended Posts