wellini Posted February 22, 2018 Share Posted February 22, 2018 Hello again, found out, if i use CloverEFI 64Bit BiosBlock I/O instead of CloverEFI 64Bit SATA, all my SAS Drives are seen during boot from Stick. So were able to load a second Time Sierra to SAS. and now also HS to SAS ! But still a problem to install Cover to HD if i try using the same Values like the Stick, i see that Boot. Maybe someone of you know what i am doing wrong. Thanks Link to comment Share on other sites More sharing options...
racerblur Posted February 24, 2018 Share Posted February 24, 2018 ok, so I tried download the latest version of Clover and I’ve been “clover scanning entries” it might be my old installed 10.9 Drive ( Chamaeleon) or maybe my NTFS formatted drives. My next step is disconnecting all but the drive I need to install OSX and maybe delete the current mac format. I currently have everything moved to the SAS controller— that’s the only way I could make 10.9 work, but maybe that’s the problem? Link to comment Share on other sites More sharing options...
wellini Posted February 26, 2018 Share Posted February 26, 2018 Hello, Last Info, I reloaded Clover again to the SSD Drive and did not copy anything. After taht all working fine and i now have a perfect running Z800 with Sierra. Link to comment Share on other sites More sharing options...
dule_636 Posted March 18, 2018 Share Posted March 18, 2018 Hey I know it's a cold topic but I was 16 hours into building my hackintosh and with a lot of of trial and error I don't know how I compiled a working usb I am now booted into my hard drive running Sierra. I have a problem making the os bootable from the hdd. I installed the latest clover I copied all my stuff from the usb but it won't boot. [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] installed successfully but when I reboot it, it goes directly to windows even if I select boot from hdd it doesn't give me options. I have all my hdd's in sas and wellini's trick helped me a lot. I unplug my windows hdd and boot from bios with hdd nothing works. I install clover with CloverEFI 64Bit BiosBlock I/OIf and it just shuts off immediately after I select boot from hard drive in bios. I can help you with any info if you can help me I would greatly appreciate it. Thanks Link to comment Share on other sites More sharing options...
kalieswaran Posted March 23, 2019 Share Posted March 23, 2019 am try to high Sierra but not working hpz800 intel xeon x5675 nvidia quadro 4000 ram 32 gb hdd 1tb Link to comment Share on other sites More sharing options...
kalieswaran Posted March 23, 2019 Share Posted March 23, 2019 (edited) 6 hours ago, kalieswaran said: am try to high Sierra but not working hpz800 intel xeon x5675 nvidia quadro 4000 ram 32 gb hdd 1tb hi any one help me plz Edited March 23, 2019 by kalieswaran Link to comment Share on other sites More sharing options...
Recommended Posts