buoncri95 Posted September 30, 2017 Share Posted September 30, 2017 Hello guys! I'd like to report something odd happening: after updating two days ago, this morning my thinkpad turned off out of the blue with battery at around 60%; turning back on, the indicator was red and showing 100%. After rebooting It seems ok, now I’m doing a recalibration cycle. Any idea of what may be causing this? Since It was at 55-60% could it be about the double battery? Link to comment Share on other sites More sharing options...
tluck Posted October 1, 2017 Author Share Posted October 1, 2017 @buoncri95 - do you have the latest/update ACPIBatteryManager kext v1.81.3 ? - this sounds like one of problems recently fixed. Link to comment Share on other sites More sharing options...
msxibuki.john99 Posted October 2, 2017 Share Posted October 2, 2017 @tluck @RehabMan I just like to thank you both for all the time and effort you guys put into making OS X work I really very much appreciate it 1 Link to comment Share on other sites More sharing options...
buoncri95 Posted October 2, 2017 Share Posted October 2, 2017 Link to comment Share on other sites More sharing options...
scskarsper Posted October 3, 2017 Share Posted October 3, 2017 Thank for your job to help me to resolve the problem in My Thinkpad T460. My PC is SSD 256GB with i7-6600U,so that I have to include a SD Card to extend my disk spaces. I am very lucky to found the driver of Realtek 522A PCIE SDReader of my T460 with a SDXC Speed in BBS. I think you can include it into your jobs to help others. The topic link is here: http://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers @tluck Extract and Drop the Sinetek-rtsx.kext into /EFI/CLOVER/kexts/Other/ of EFI partition.and reboot, the PCIE SDReader will worked Sinetek-rtsx.kext.zip 3 Link to comment Share on other sites More sharing options...
azerty076 Posted October 3, 2017 Share Posted October 3, 2017 Well done it works! Thank for your job to help me to resolve the problem in My Thinkpad T460. My PC is SSD 256GB with i7-6600U,so that I have to include a SD Card to extend my disk spaces. I am very lucky to found the driver of Realtek 522A PCIE SDReader of my T460 with a SDXC Speed in BBS. I think you can include it into your jobs to help others. The topic link is here: http://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers @tluck Extract and Drop the Sinetek-rtsx.kext into /EFI/CLOVER/kexts/Other/ of EFI partition.and reboot, the PCIE SDReader will worked Link to comment Share on other sites More sharing options...
superbboy Posted October 5, 2017 Share Posted October 5, 2017 I just upgrade my system to High Sierra replacing the kexts, everything is okay, thank you @tluck. It works in my T460s Thanks a lot Thank for your job to help me to resolve the problem in My Thinkpad T460. My PC is SSD 256GB with i7-6600U,so that I have to include a SD Card to extend my disk spaces. I am very lucky to found the driver of Realtek 522A PCIE SDReader of my T460 with a SDXC Speed in BBS. I think you can include it into your jobs to help others. The topic link is here: http://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers @tluck Extract and Drop the Sinetek-rtsx.kext into /EFI/CLOVER/kexts/Other/ of EFI partition.and reboot, the PCIE SDReader will worked Link to comment Share on other sites More sharing options...
jus12 Posted October 5, 2017 Share Posted October 5, 2017 Hi Tluck, I just got T450S with HD5500 Graphics. will those files posted here work with it? Or the differences between T450S and T460 are too great? Link to comment Share on other sites More sharing options...
azerty076 Posted October 7, 2017 Share Posted October 7, 2017 Strange problem on my side. Sometimes, using it on battery, suddenly I get the screen with full brightness, and I see on the menu bar that it's like that I had plugged the pc to power. Few seconds later, it comes back like before. Very strange no? Link to comment Share on other sites More sharing options...
skoal2007 Posted October 7, 2017 Share Posted October 7, 2017 but ppl said one slot is soldered with 4gb in some model, so it can only be upgraded to 20gb at most In my T460 is not soldered... the soldered one I referred to is T460s, not t460 sorry for the confusion 1 Link to comment Share on other sites More sharing options...
tluck Posted October 7, 2017 Author Share Posted October 7, 2017 Hi Tluck, I just got T450S with HD5500 Graphics. will those files posted here work with it? Or the differences between T450S and T460 are too great? well if you mean the kexts, yes some should work i wish i still had my T460... but here is where i got a lot of good ideas etc: https://github.com/shmilee/T450-Hackintosh.git Link to comment Share on other sites More sharing options...
Kworke Posted October 11, 2017 Share Posted October 11, 2017 Does anyone have DisplayPort working on the Lenovo T460? (I don't have it working, and the version of HDMI on T460 doesn't support 4K). Link to comment Share on other sites More sharing options...
tluck Posted October 11, 2017 Author Share Posted October 11, 2017 @Kworke - well it worked for me when I had a T460. i used a mini-display port adapter to connect to HDMI etc. Link to comment Share on other sites More sharing options...
barrrrt Posted October 13, 2017 Share Posted October 13, 2017 It was tough to get High Sierra on the T560 working again, but finally the upgrade succeeded. I guess I didn't took care, that the files in the /L/E Folder were still the old files. I had to update them too... at least im for 90% sure 1 Link to comment Share on other sites More sharing options...
superbboy Posted October 14, 2017 Share Posted October 14, 2017 I got the same problem when I upgraded to HS. Now I had removed all kexts in /L/E floder and it work fine It was tough to get High Sierra on the T560 working again, but finally the upgrade succeeded. I guess I didn't took care, that the files in the /L/E Folder were still the old files. I had to update them too... at least im for 90% sure Link to comment Share on other sites More sharing options...
tluck Posted October 16, 2017 Author Share Posted October 16, 2017 sorry guys. I guess I thought it would be understood that to get to High Sierra easily, one must update ESP and kexts in /L/E before doing the upgrade. The kexts posted will run on 10.12 or 10.13 The basic procedure that seems to work: 1) update ESP and kexts with latest zip from GitHub (posted a new bundle yesterday) while still on 10.12.6 2) reboot and verify functions (audio etc) 3) directly download High Sierra from App Store to HD 4) install from HD 1 Link to comment Share on other sites More sharing options...
vusun123 Posted November 5, 2017 Share Posted November 5, 2017 Apparently there is a variant of the T460 with Nvidia Geforce GT 940MX sitting at RP09.PEGP . Tluck can you add another SSDT that disable the device ? Link to comment Share on other sites More sharing options...
xcaret Posted November 5, 2017 Share Posted November 5, 2017 By any chance does anyone know how to fix the Displayport? Currently only able to use HDMI but would be useful to be able to use both, if possible. Also, after upgrading to High Sierra, my battery % wasn't displaying correctly on the menu bar. I had to remove it by holding cmd key and then dragging the icon out....just in case someone comes upon the same issue! Link to comment Share on other sites More sharing options...
tluck Posted November 5, 2017 Author Share Posted November 5, 2017 @vusun123 - sure if provided the SSDT, I will include in the next release. I don't have T460 but I have been updating the zip on Github with newer Clover and kexts. So obviously I can't test or validate anything. @xcaret - are you on the latest ACPIBatteryManager kext? there were some recent updates. 1 Link to comment Share on other sites More sharing options...
tluck Posted November 5, 2017 Author Share Posted November 5, 2017 @ka209 - what is difference between old and new? did you run the custom create_backlight kext script to remake the from the new one? 1 Link to comment Share on other sites More sharing options...
Tetonne Posted November 5, 2017 Share Posted November 5, 2017 thanks tluck for 2 new packs (T420-T460) Link to comment Share on other sites More sharing options...
xcaret Posted November 5, 2017 Share Posted November 5, 2017 @xcaret - are you on the latest ACPIBatteryManager kext? there were some recent updates. Yes, I am on the latest ACPIBatteryManager from your new kext pack. The battery percentage is working now after dragging the battery icon out of the menu bar and re-adding it on the System Preferences.....just wanted to throw this glitch with my system in case anyone else faces the same problem. Is displayport supposed to be working? So far, I've only gotten the HDMI to work. Never mind, I got it to work now! I just went ahead and followed the DSDT/SSDT steps again and now it is working. thank you for all your help!!!! Link to comment Share on other sites More sharing options...
skoal2007 Posted November 8, 2017 Share Posted November 8, 2017 i decided not purchasing T460 unless tluck has one. Link to comment Share on other sites More sharing options...
xcaret Posted November 11, 2017 Share Posted November 11, 2017 Unfortunately, the longer the problem, the battery was not displayed correctly. It stays at a percent number and updates only after restart. This has not improved with the new version You can also use coconut battery to display your battery percentage on your menu bar.....just another option. My t460 is running flawlessly now. 2 Link to comment Share on other sites More sharing options...
doom1942 Posted November 15, 2017 Share Posted November 15, 2017 Hello, I know this is quite the ask. But i was wondering if anyone had an entire HDD image for this build so i could test it? Thanks in advance. Link to comment Share on other sites More sharing options...
Recommended Posts