vusun123 Posted January 4, 2017 Share Posted January 4, 2017 updated the zip - audio kext mods - added ambient noise for external mic input - i still get quite a bit of hiss. - added extra Output - LineOut for dock audio - included syscl's updated nvram save scripts for /etc/rc.shutdown.d etc @mangyver - i added the HS09 port - it's the finger print reader for me. Can we somehow modded the fingerprint to work like touchid lol ? 1 Link to comment Share on other sites More sharing options...
azerty076 Posted January 4, 2017 Share Posted January 4, 2017 Can we somehow modded the fingerprint to work like touchid lol ? Lol, even under Windows it doesn't work very well... But for the card reader do you think there is a solution? Link to comment Share on other sites More sharing options...
thedeliveryboy Posted January 4, 2017 Share Posted January 4, 2017 Thanks again everyone - this just gets better all the time! Any advice on audio troubleshooting? I've followed all the instructions (twice) and still not working. Where should I check first? Thanks TDB Link to comment Share on other sites More sharing options...
barrrrt Posted January 4, 2017 Share Posted January 4, 2017 @tluck: So on the t460 the 3 finger swipe left/right works good? Hm.... i figured out, that the 3 finger swipe left/right works with rehabmans voodoops2 kext with the t560. The changes, you have did, make the trackpoint buttons work better (left click the left button/middle button for scrolling/right click is right button)... BUT the 3 finger swipe (left/right) doesn't work any longer. Do you have an idea why the 3 finger swipe left and right doesn't work any longer on the t560 trackpad? 3 finger swipe up/down work perfect. ________________ the new audio kext is not working with the t560. The old one is working fine. @thedeliveryboy: the AppleHDA_alc293 is in your /S/L/E or /L/E? Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 so this AppleHDA_ALC293.kext isnt working for either of you? this custom kext should be in /L/E it links to the real AppleHDA.kext in /S/L/E 3 finger swipe - when you said it works? in what app does it work. i remap from the default mapping to command [ and command ] - which are back/forward in safari. Link to comment Share on other sites More sharing options...
barrrrt Posted January 4, 2017 Share Posted January 4, 2017 @tluck: i go to the settings - keyboard - shortcut. There i try to define a shortcut to any command... just for testing purposes. When i try to define a command with 3 finger swipe left/right it doesn't do anything there. Just the swipe up/down works. When i use rehabs kext, it works. I also tried to delete your remapping, cause i thought it could be the problem, but it isn't.... as you said: Your command just redefines the 3 finger swipe left/right. Is it possible to reach you in irc or anywhere??? And the new Applehda isn't working for me, too. Correct. The old version works.. Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 hmm. i dont understand how swipe can be that different. 'my' voodooPS2 kext is essentially the same as rehabman's kext. i added LENOVO override definitions for Keyboard and Trackpad. but those can be removed for testing. audio - wonder what is going on here. - there is non-dock version of the files - in the Resources directory in the kext. - copy the *nodock* files to layout28.xml.zlib and Platforms.xml.zlib and rebuild the kextcache Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 @barrrt do you have this set in the TrackPad prefs? Link to comment Share on other sites More sharing options...
mangyvr Posted January 4, 2017 Share Posted January 4, 2017 Can we somehow modded the fingerprint to work like touchid lol ? The FP reader works in macos at all? The t460s touch sensor is pretty awesome. The t460 swipe sensor does indeed suck. The t470 has upgraded it to the same one as the t460s in addition to an IR cam for Windows Hello. Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 @mangyver - have you tested the new Audio kext i posted today? i want to see if there is a wide-spread issue? - there used to be sw - i never used it - to use the finger print - it was for mac OS that worked on the T420 (Upek device finger print reader) - TrueSuite by Authentec. 1 Link to comment Share on other sites More sharing options...
barrrrt Posted January 4, 2017 Share Posted January 4, 2017 Wow. I had check marked most of the prefs.... after unchecking the swipe left/right worked!!!!!!! Thank you very much for investigating. Regarding the audio: Didnt use the audio settings (i mean: hdmi audio) yet. If you want to i can test tomorrow if i can modify the audio kext. Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 @barrrrt- cool - glad it is working now! - on audio just wanted to make sure the basic audio speakers/mic are still working for everyone. I added 2 audio out options -(1) HDMI and (2) LineOut for ThinkPad Dock as well as tweaked the Boost levels for the Mics. Since the T440 use ALC292 - which almost identical to the T460 ALC293 - was able to leverage shmilee's excellent work for the 460/560. Link to comment Share on other sites More sharing options...
barrrrt Posted January 4, 2017 Share Posted January 4, 2017 And on your side the audiokext is working without problems? Hm.... Wondering why it didn't find any device when i used the new kext.... But u had an idea... ill test tomorrow. Link to comment Share on other sites More sharing options...
tluck Posted January 4, 2017 Author Share Posted January 4, 2017 yes make sure any config/SSDT changes are consistent with this kext that uses layout ID 28 vs 1. Link to comment Share on other sites More sharing options...
mangyvr Posted January 4, 2017 Share Posted January 4, 2017 @mangyver - have you tested the new Audio kext i posted today? i want to see if there is a wide-spread issue? - there used to be sw - i never used it - to use the finger print - it was for mac OS that worked on the T420 (Upek device finger print reader) - TrueSuite by Authentec. Not yet. I'll give it a whirl soon. I've not had issues with the older kext though. The new touch fingerprint sensor is from Synaptics. Probably no drivers for it. Link to comment Share on other sites More sharing options...
mangyvr Posted January 5, 2017 Share Posted January 5, 2017 Not yet. I'll give it a whirl soon. I've not had issues with the older kext though. The new touch fingerprint sensor is from Synaptics. Probably no drivers for it. The updated XHC SSDT and the audio kext are working for me. Link to comment Share on other sites More sharing options...
barrrrt Posted January 6, 2017 Share Posted January 6, 2017 Ah.. ok... its possible that it didn't work for me, cause I just changed the kext and didn't change the ssdt. I created a new HDEF ssdt and checked the config.plist for the audio entry (port 28). After a restart, the new audio kext is working too. Link to comment Share on other sites More sharing options...
barrrrt Posted January 8, 2017 Share Posted January 8, 2017 WWAN working Hi guys. I bought a Huawei ME906S wwan card for my t560. It took me really long, but finally i got it working. Short side note: the me906s seems to be the European version. The ME906E is on the markt too, and should work with the attached kext, too. You need at least 2 kexts in the SLE or LE folder. After that, you are done. The HuaweiDataCardDriver_10_9.kext is extracted from the newest "mobile connect" software from Huawei. Thats just a suite with the driver and a software that can connect to your network... but... the suite is not needed. Card is not shown in system profile - network - wwan. I don't know why, but it doesn't matter... right? me906HUAWEI.zip 2 Link to comment Share on other sites More sharing options...
thedeliveryboy Posted January 8, 2017 Share Posted January 8, 2017 @barrrrt - thank you for this! Once I have copied the kexts and restarted, how to I add the WWAN card in System Preferences > Network? On another note, I wanted to show you guys my "ThinkBook Air" driving an 85" display at my office via HDMI out. It really confuses people when they see macOS running on my Lenovo! 3 Link to comment Share on other sites More sharing options...
barrrrt Posted January 9, 2017 Share Posted January 9, 2017 @thedeliveryboy - just click on the plus in the preferences >network. You will find a HuaweiMobile there. Did it work on your side? Link to comment Share on other sites More sharing options...
azerty076 Posted January 9, 2017 Share Posted January 9, 2017 What a great news!!! WWAN working Hi guys. I bought a Huawei ME906S wwan card for my t560. It took me really long, but finally i got it working. Short side note: the me906s seems to be the European version. The ME906E is on the markt too, and should work with the attached kext, too. You need at least 2 kexts in the SLE or LE folder. After that, you are done. The HuaweiDataCardDriver_10_9.kext is extracted from the newest "mobile connect" software from Huawei. Thats just a suite with the driver and a software that can connect to your network... but... the suite is not needed. Card is not shown in system profile - network - wwan. I don't know why, but it doesn't matter... right? Link to comment Share on other sites More sharing options...
superkwn Posted January 10, 2017 Share Posted January 10, 2017 @tluck, does the installation guide work for x250 with minimal work on dsdt and more on ssdt? Link to comment Share on other sites More sharing options...
superkwn Posted January 10, 2017 Share Posted January 10, 2017 @tluck, I am trying to adapt your guide to install on x250. Not sure if it is doable. But I will give it a try. One thing I notice is that in your guide, there is no guide on the handling of battery. Is there nothing needs to be done? Also x250 use different sound codec, yours use alc923 and x250 uses alc 2323, I suppose. So how to adapt your Kext to alc2323? Link to comment Share on other sites More sharing options...
tluck Posted January 10, 2017 Author Share Posted January 10, 2017 @superwkn - it may be easier to adapt a T450 set of files to the x250. see https://github.com/shmilee/T450-Hackintosh I adapted a lot of the stuff from the 450 to my box the audio on x250 is probably ALC292 vs ALC293. the battery stuff gets patched by patchmatic - it creates a combined battery called BATC which is fake thing to aggregate BAT1 and BAT2 the process for DSDT/SSDT is fairly simple: extract the original DSDT use patchmatic to do some basic patching on the original. and then create a bunch of SSDT to (re) define all the devices ARPT HDEF IGPU LPC PNLF PS2K SMBUS XHC etc it is a matched set - config.plist + DSDT/SSDT + custom kexts. 1 Link to comment Share on other sites More sharing options...
barrrrt Posted January 11, 2017 Share Posted January 11, 2017 Hi again. Did anyone of you guys get a docking station to work? I tried to use a hdmi cable with a docking station, and the computer restarted. When I just put the hdmi cable into the notebook (without the dock) I have no problems. Maybe some more fixes are needed? Would like to discuss this a bit.... if there is no solution I will give the dock back Link to comment Share on other sites More sharing options...
Recommended Posts